Patient Monitor Accessories

NIHON KOHDEN K922 ECG Connection Cord Trunk Cable JC-906P Specification Product Name NIHON KOHDEN K922 ECG Connection Cord Trunk Cable JC-906P Brand NIHON KOHDEN Part No JC-906P Ambient Temperature -20 ℃ to +65℃ Relative humidity 10% to 90% Atmospheric pressure 700 hPa to 1060 hPa The role of quality management in the healthcare sector to improve quality improvement methods, treatment outcomes and client satisfaction with services. It also ensures that best practices are

BR-913P NIHON KOHDEN K910A 3-Electrode Lead Snap Type 0.8m Specification Product Name NIHON KOHDEN K910A 3-Electrode lead BR-913P Brand NIHON KOHDEN Type Snap Cable length 0.8m Lead Number 3-lead Ambient Temperature -20 ℃ to +65℃ Relative humidity 10% to 95% Atmospheric pressure 700 hPa to 1060 hPa Product List Part No Model No . Description K225 BR-018P Electrode lead for 3 electrodes(IEC) clip type cable length :0.8m K226 BR-019P Electrode lead for 3 electrodes(IEC) ,Snap

NIHON KOHDEN S944B Adult cuff 21-30CM YP-963T Reusable ,Latex-free NIHON KOHDEN S944B Adult cuff 21-30CM YP-963T Blood pressure (BP) is the pressure that circulating blood puts on the walls of arteries. During each heartbeat, blood pressure varies between a maximum (systolic) and a minimum (diastolic). This change indicates the state of the heart's pumping function, which is an important vital sign. A non-invasive indirect method of measuring blood pressure is oscillometric

YN-901P NIHON KOHDEN S902 Adult and Pediatric Air Hose (Adult 3.5m ) Blood pressure (BP) refers to the pressure that circulating blood exerts on the walls of the arteries. With each heartbeat, blood pressure changes from maximum (systolic) to minimum (diastolic). This change indicates that the state of the heart's pumping function is an important vital sign. Oscillometric blood pressure measurement is an indirect and non-invasive method of measuring blood pressure. In this

Mindray 3 leadwire set AHA Infant Neonatal IEC Clip Connectors American standrad PN 0010-30-43250 Model EL6305A ► Brief Introduction As the respiration measurement adopts the standard ECG electrode placement, you can use different ECG cables (3-lead). Since the respiration signal is measured between two ECG electrodes, if a standard ECG electrode placement is applied, the two electrodes should be RA and LA of ECG Lead I, or RA and LL of ECG Lead II. Compatible with DPM 4, DPM

GE Healthcare DURA-CUF™ 2 tubes Submin Adult Blood Pressure Cuffs 23-33CM REF 002203 ​ ►Brief Introduction DURA-CUF™ is gentle and designed for durability.Made with tough, flexible nylon, they are convenient and easy-to-clean with curved corners to enhance your patient’s comfort . They are constructed for multiple patient use in low-acuity care settings and ideal for physicians offices where the risk of contamination is diminished. ► Features Made with durable materials that

GE Healthcare / Datex Ohmeda / Carefusion Temperature Reusable Adult Temperature Probes 400-series Skin Probe 3m10ft M1024247 ► Brief Introduction The temperature is measured by a probe whose resistance varies when the temperature changes, called NTC (Negative Temperature Coefficient) resistor. The resistance can be measured by two complementary methods: Applying a constant voltage across the resistor and measuring the current that flows through it. Applying a constant

GE original Respiratory Exhalation Valve Assembly ASSY-MSN, EXH VALVE ASSY Accessory-Ma 1505-8568-000 Calibrate the exhalation valve 1. Unable to achieve a pressure of 34 cmH2O The test indicates a fault without displaying a warning message. • Make sure the gas supply is connected. • Identify leaks, repair leaks. and repeat the check 2. If the pressure relief and exhalation valve tests fail and the leak rate is less than 2000, the most likely problem is that the Pexp sensor

PN 1505-3231-000 GE Datex-Ohmeda Respiratory Adult Children Flow Sensor XDCR FLOW 0-200 LMIN An airflow sensor is a device used to monitor a patient’s airflow. Flow sensors measure the amount of gas released from the O₂ and air channels during inspiration and expiration. The relative proportions of the gases delivered by each channel are continuously adjusted to accurately control the percentage of oxygen delivered to the patient. The flow sensor is placed between the