Optical Transceiver Module

10Gbps 1550nm SFP+ Optical Transceiver | High Quality and Cost Effective TAKFLY 40KM Reach (TK-1592-3LCD40) Product Overview TAKFLY's SFP+ transceiver TK-1592-3LCD40 is designed for use in 10-Gigabit Ethernet links up to 40km over single mode fiber. The module consists of 1550 EML Laser, InGaAs PIN and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF8472. The optical output

40G QSFP+ to QSFP+ Direct Attach Passive Copper Cable The 40G QSFP+ to QSFP+ Direct Attach Passive Copper Cable (DAC) provides a cost-effective, high-performance interconnect solution for 40 Gigabit Ethernet and InfiniBand networks. Designed for high-density data center environments, this cable enables reliable 40G links between QSFP+ ports on switches within racks and across adjacent racks. Fully compliant with QSFP MSA and IBTA standards, our DAC cables deliver low latency,

25G SFP28 Active Optical Cable – High-Performance Short-Reach Fiber Interconnect The 25G SFP28 Active Optical Cable (AOC) is a high-performance, cost-effective direct-attach fiber assembly designed for 25G Ethernet short-reach interconnects within racks and across adjacent racks. Featuring SFP28 connectors on both ends and operating over multi-mode fiber (MMF), this AOC provides a plug-and-play solution for data centers, enterprise networks, and high-performance computing

100G QSFP28 Active Optical Cable (AOC) 4×25G Configuration, Up to 104Gbps, 3-70m Range, VCSEL Array Technology, Low Power Consumption

10G BASE-T SFP+ Copper Transceiver | High Quality Fiber Optical Network | TK-T5-RJ45 10/100BASE-T Copper SFP Transceiver | High Quality and Fiber Optical Network | TK-G2-RJ45 Product Overview SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+-10GBASE-T uses the SFP's RX_LOS pin for link

10Gbps Tunable DWDM 80KM SFP+ Transceiver Model: TKTDxxX-3LCD80 | 80KM Reach | High Quality and Cost Effective Product Overview The Tunable 10Gb/s SFP+ transceiver provides high-speed serial links at signaling rates from 9.95 Gb/s to 11.3 Gb/s. This integrated fiber optic transceiver complies with SFP+ MSA standards (SFF-8431, SFF-8432, SFF-8690, SFF-8472) and ITU-T G.698.1 standard with 50 GHz channel spacing for SONET/SDH, IEEE DWDM 10GBASE-ZR for 80 km reach (Ethernet),

155Mbps SFP Bi-Directional Transceiver | 20KM Reach Tx1310nm/Rx1490nm | (TK-B3403-3LCD20) The SFP-BIDI transceivers are high-performance, cost-effective modules supporting data rates of 155Mbps with 20KM transmission distance over single-mode fiber. The transceiver consists of three main sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA), and an MCU control unit. All modules satisfy Class I laser safety requirements and are

2.67Gbps SFP Optical Transceiver | High Quality 80KM Reach Model: TK-1548-3LCD80 Product Overview High-performance, cost-effective SFP transceiver modules supporting dual data-rate of 2.67Gbps and 80KM transmission distance with single-mode fiber. The transceiver consists of three key sections: DFB laser transmitter, APD photodiode integrated with trans-impedance preamplifier (TIA), and MCU control unit. All modules satisfy class I laser safety requirements. Compatible with

1.25Gbps SFP Bi-Directional Transceiver 120KM Reach Tx1550nm/Rx1490nm The SFP-BIDI transceivers are high-performance, cost-effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps with 120KM transmission distance over single-mode fiber. This transceiver consists of three main sections: a DFB laser transmitter, an APD photodiode integrated with trans-impedance preamplifier (TIA), and MCU control unit. All modules comply with Class I laser safety requirements and are

1.25Gbps SFP Bi-Directional Transceiver 20KM Reach Tx1310nm/Rx1550nm The SFP-BIDI transceiver delivers outstanding performance with superb quality at an affordable price. Utilizing single-mode fiber, this module supports 20KM transmission distance and dual data-rate operation of 1.25Gbps/1.0625Gbps. Transceiver Construction The transceiver consists of two main sections: FP laser transmitter PIN photodiode with trans-impedance preamplifier (TIA) and MCU control unit This

10Gbps SFP+ Bi-Directional Transceiver | 10km Reach Tx1270/1330nm / Rx1330/1270 nm | (TK-B23(32)92-3LCD10) 10Gbps SFP+ Bi-Directional Transceiver Overview The TK-B23(32)92-3LCD10 series single mode transceiver is a small form factor pluggable module designed for duplex optical data communications, including 10GBASE-LR/LW as defined by IEEE 802.3ae. Featuring an SFP+ 20-pin connector, it enables hot plug capability for seamless integration. This module is engineered for single

1.25Gbps CWDM SFP Optical Transceiver | High Quality 40km Reach TK-XX24-3LCD40 1.25Gbps CWDM SFP Optical Transceiver Overview The SFP transceivers are high-performance, cost-effective modules supporting dual data-rate of 1.25Gbps and 40km transmission distance with single-mode fiber. The transceiver consists of three sections: an uncooled CWDM DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy

10Gbps SFP+ Bi-Directional Transceiver | 80KM Reach Model: TK-Bxx92-3LCD80 | Wavelength: Tx1490/Rx1550nm / Tx1550/Rx1490nm Product Overview The TK-Bxx92-3LCD80 is a hot-pluggable 3.3V Small-Form-Factor transceiver module designed for high-speed communication applications requiring data rates up to 11.1Gb/s. Compliant with SFF-8472 SFP+ MSA standards, this module supports data links up to 80km over 9/125μm single mode fiber. Engineered for single mode fiber operation with

2.5Gbps CWDM SFP Optical Transceiver High Quality and Cost Effective TAKFLY 40km Reach (TKC-XX24-3LCD40) Product Overview TAKFLY TKCXX48-3LCD40 Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1XX0nm DFB laser and the PIN photodetector. The module data link supports distances up

2.488Gbps SFP Bi-Directional Transceiver High Quality and Cost Effective 20km Reach Tx1490nm/Rx1310nm (TK-B4324-3SCD20) Product Overview The SFP-BIDI transceivers are high-performance, cost-effective modules supporting dual data-rates of 2.488Gbps/2.125Gbps with 20KM transmission distance over single-mode fiber. The transceiver consists of three main sections: a DFB laser transmitter, an APD photodiode integrated with a trans-impedance preamplifier (TIA), and an MCU control

1.25Gbps SFP Bi-Directional Transceiver 20KM Reach Tx1310nm/Rx1490nm TK-B3424-3LCD20 1.25Gbps SFP Bi-Directional Transceiver Overview The SFP-BIDI transceivers are high-performance, cost-effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps with 20KM transmission distance over single-mode fiber. The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA), and MCU control unit. All

Description The TK-B23(32)92-3LCD10series single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-LR/LW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The TK-B23(32)92-3LCD10module is designed for single mode fiber and operates at a nominal wavelength of 1270nm or 1330nm; The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according

Description This 1310 nm DFB 10Gbps SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 2KM. The SFP+ 2KM module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal

Description This 1310 nm DFB 10Gbps SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 220m. The SFP+ m module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal

Description The SFP-BIDI transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 40KM transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For