Fiber Patch Cord Manufacturing Machine

FTTH Drop Cable Cutting Machine Coiling Machine for outdoor fiber optic patch cords production line Model:CLX-D95 Place of Origin:ShenZhen,China Fiber Optic Drop Cable Cutting Machine Product description: CLX-D95 high-speed heavy-duty FTTH drop cable cutting machine is suitable for looping, meter counting and binding of the ftth drop cable, butterfly cable, 12 core cable, etc. The equipment has the advantages of high production efficiency, good cable arrangement quality, no

Simplex Fiber Thermal Stripper Hot Jacket Remover Ribbon Fiber Stripper In-built Hot Ribbon Stripper Fiber Product description CLX-RB02 single-core thermal stripper . The product with compact and light-weight design, easy to operate and reliable. Through vertical stripping, the applied force is light and stripping quality high. The blade is durable and easy to replace. Adopt guide groove and thermal stripping way to ensure no damage to the fiber, featuring easy and fast way

CLX-MT12 fiber tester experiment optical interferometer 3d fiber optic interferometer Model:CLX-MT12 Place of Origin:ShenZhen,China 3D fiber optic interferometer Key Features: CLX-MT12 is an auto-focusing, auto-calibration, contactless fiber end-face interferometer. It adopts the principle of white light and red-light interference to restore the geometry of the fiber end-face and calculate the technical parameters accurately. It is your best choice and ideal partner for

CLX-RB05 Optical Cable Stripping Machine half automatic heat stripper machine Model:CLX-95 Place of Origin:ShenZhen,China optical fiber thermal stripper Key Features: This half-automatic fiber cable stripper is used to stripped the fiber cable diameter below 1.2mm, and can strip the buffer and coating of the fiber cable one time, which is widely used in fiber patch cords production and improve the fiber stripping efficiency. Fiber Thermal stripper Product Features: *Desk-top

Automatic Fiber Optic Cable Cutting Machine FTTH Drop Wire Optical cable Cutting Machine Model:CLX-95 Place of Origin:ShenZhen,China Cutting machine for optic fiber cable Key Features: CLX-95 is suitable for fiber optic cable cutting process. Customize the length of the cable, the number of cable cutters, the number of cutters, and the stop (for pigtail marking). Cable speed, cable speed 0-100% can be adjusted at will (60% recommended), cable size can be adjusted freely. This

CLX-24D Digital Type Field Fiber Optic Oven Epoxy Curing for Optical Connector Ferrules for Patchcord Production ​ Model:CLX-24D Place of Origin:ShenZhen,China Fiber Optic Curing Heat Oven Description CLX-24D series Curing Oven is a type of universal curing oven for fiber optic connectors, it is available for general connectors (such as FC/SC/ST, MU/LC) after glue injecting. The heating board could contain 24 connector ferrules at most. There is indicator light, timer and

Simplex Fiber Thermal Stripper Hot Jacket Remover Ribbon Fiber Stripper In-built fiber optic stripper Product description CLX-RB02 single-core thermal stripper . The product with compact and light-weight design, easy to operate and reliable. Through vertical stripping, the applied force is light and stripping quality high. The blade is durable and easy to replace. Adopt guide groove and thermal stripping way to ensure no damage to the fiber, featuring easy and fast way to

CLX-P6800 Fiber Patch Cord Manufacturing Machine for fiber optic cable Stripping and Cutting Overview Essential details Model Number:CLXP6800 Type: Fiber Optic Production Machine Place of Origin: Guangdong, China Brand Name: chuanglixun Use: Fiber Optic Patch Cord Production Warranty Time: 1Year Name: Fiber Optic Cable Stripping Machine Application: Fiber Optic Patch Cord Production Model: CLX-P6800 Color: White Power supply: 220V 50Hz Rated power: 20W Weight:15kg Size:

CLX-24D Digital Type Field Fiber Optic Oven Optical Connector Ferrule Epoxy Curing Oven for Patchcord Production ​ Model:CLX-24D Place of Origin:ShenZhen,China Description 1.24 connectors heating at the same time 2.Suitable to different type of connectors 3.Heating block design prevent heat loss 4.Simply operation and perfect solidified effect 5.Small size, easy to carry, quick heating Features 1.Special designed for curing epoxy of fiber optic connectors 2.Suitable for

450W Factory Fiber Optic Production Automatic Fiber Optical Cable Cutting Machine Model:CLX-94 Place of Origin:ShenZhen,China Drop Wire Optical Cable Cutting Machine​​ Key Features: 1, High Automation: Auto running for full process from raw cable to final section. 2, High Length Accuracy: Meter Wheel to count length, no length deviation from cable twist, slip during feeding. By high precision measurement of compensation to measure. 3, High Efficiency: Less than 15 sections

Product Description: CLX-DJ02 semi-automatic dispenser is controlled by a film tap switch.Can adjust manual, semi-automatic state, the use of digital timing controller accurate to seconds, the correct control of flow, will not waste liquid material, it is easy to change each infusion volume and infusion time.It can solve many problems in stock development. It is simple to use and easy to operate. Equipped with vacuum suction function, it is not easy to fatigue, no waste, and

Convenient Operation Endface Inspector 400x Fiber Optic Inspection Microscope Model:CLX-7000 Place of Origin:ShenZhen,China Description Desktop fiber end face detector series products, is according to the market a variety of customer demand, our company developed a set of a series of equipment used to detect various kinds of fiber products surface, can detect all kinds of single core insert core, ordinary 2.5/1.25 core series, MPO/MTP series, optical module, TOSA/ROSA

High Precision Air Pressure Optical Fiber Cable Connector Crimping Machine Model:CLX-Y1E Place of Origin:ShenZhen,China Product description: 1.One-time crimping: ceramic lock pin and metal tail pipe can be crimped at one time, faster and more convenient 2.ST, SC (upc, apc), LC (upc, apc), FC (upc, apc) can be used universally, different types of fiber ports are suitable for different types of fiber optic connector assembly and crimping 3.The product is made through multiple

ILRL-6001 High Precision Optical Fiber Monitoring System with 0.02dB/hour Output Stability @250C Calibration Wavelength Product Description: The ILRL-6001 Fiber Patch Cord Manufacturing Machine is a cutting-edge product designed for the production of fiber patch cords, with a light source wavelength of MM:850nm and SM:1310/1550nm. It is a highly reliable machine with a 1 Year warranty and an AC 90-260 V power supply. It has a weight of only 3KG, making it an ideal choice for

P6802 Factory Automatic Fiber Optic Cable Patch Cord Pigtail Stripping And Cutting Machine Overview Essential details Model Number: P6802 Type: Fiber Optic Production Machine Place of Origin: Guangdong, China Brand Name: chuanglixun Use: Fiber Optic Patch Cord Production Warranty Time: 1Year Name: Fiber Optic Cable Stripping Machine Application: Fiber Optic Patch Cord Production Model: P6802 Color: White Power supply: 220V 50Hz Rated power: 30W Weight: 24kg Size: 390mmx330mmx

Fiber Optic Vertical Pneumatic Crimping Machine For Making Fiber Production Line Model:CLX-Y1E Place of Origin:ShenZhen,China Product description: Description: It is specially designed for crimping optical fiber connector, wire terminal and wire harness. Automatic crimping scheme can be customized for wire terminal crimping. Silent crimping, easy to operate. Pressure Source Motor Drice/ Electric Motor Pressure Value 1500~2000kgf Standard Crimping Die Size (mm) 3/ 3.2/ 3.3/ 3

FPV Invisible 10KM 15Km Optic Fiber Canister ultra-reliable Optical fiber reel 3 km with air unit and ground side unit Model:CLX-WF03 Place of Origin:ShenZhen,China Fpv Uav Optical Fiber Canister Product description: Fiber Optic Box The Fiber Optic Box offers a sleek, durable solution for storing and managing optical fibers with ease. Built for reliability, it ensures smooth cable deployment without straining the fiber. G657A2 Invisible Fiber Canister For Uav Features:

High Precision Air Pressure Optical Fiber Cable Connector Crimping Machine Model:CLX-Y1E Place of Origin:ShenZhen,China Product description: 1.One-time crimping: ceramic lock pin and metal tail pipe can be crimped at one time, faster and more convenient 2.ST, SC (upc, apc), LC (upc, apc), FC (upc, apc) can be used universally, different types of fiber ports are suitable for different types of fiber optic connector assembly and crimping 3.The product is made through multiple