3D Digital Compass

HCM380 3 Axis Magnetic Fluxgate Tilt Meter For Measuring Pitch Roll Heading Angle Products Desc. Main Feature ● heading accuracy: 0.5° ● roll measuring range:±180° ● tilt resolution: 0.1° ● tilt accuracy:

Satellite orientation sensor antenna north finder sensor compass sensor for dish antenna ▶ APPLICATION ● Satellite antenna search satellite ● Marine navigation surveying and mapping ● GPS integrated navigation ● Antenna servo control ● Infrared imager ● Laser range finder ● Map for plotter ● ROV underwater robot navigation ● Oceanography measurement instruments ● Special occasion robot HCM370B / HCM375B Index Heading Heading Accuracy 0.5° Tilt < 10° 2.0° Tilt < 60° 3.0° Tilt

HCM375 Azimuth Angle Fluxgate Compass Sensor For Mining Navigation ▶ MAIN FEATURE ●Heading Accuracy: 0.5° ●Roll Measure Range:±180° ●Tilt Resolution: 0.1° ●Tilt Accuracy:

​Dcm301b 3d Digital Compass High Precision Electronic Rs232 Rs485 Digital Compass ▶ FEATURE ★ Heading accuracy: 0.5°～0.8° ★ Tilt angle measuring range :±85° ★ Tilt angle resolution: 0.1° ★ Tilt angle accuracy: 0.1° ★ Wide temperature : -40℃～+85℃ ★ Size: L60×W59×H33mm ★ With hard magnetic, soft magnetic and angle compensation ★ DC 5V power supply ★ Standard RS232/RS485/TTL output interface ★ IP 67 protection class ▶ APPLICATION ★ Satellite antenna search satellite ★ Marine

SDC620B-N HIGH-PRECISION DIGITAL DISPLAY 3D ELECTRONIC COMPASS.pdf Product Overview SDC620B-N is a new three-dimensional all-attitude compass launched by RION Technology. The product applies fluxgate technology. It is a high-precision three-dimensional compass with high resolution, strong anti-noise ability and stable temperature deviation. Advanced hard-iron and soft-iron calibration algorithms are used, as well as high-precision accelerometers for tilt compensation, to

DCM250B DCM260B HIGH ACCURACY 3D DIGITAL COMPASS.pdf ▶ INTRODUCTION DCM250B/260B is a low-cost three-dimensional electronic compass, using hard and soft magnetic calibration algorithm, so that the compass can eliminate the influence of magnetic field through the calibration algorithm in the environment with magnetic field interference. The DCM250B&260B integrates a three-axis fluxgate sensor, calculates the heading in real time through the central processor, and uses a three

HCM380B HCM385B-N HIGH ACCURACY 3D DIGITAL COMPASS SENSOR.pdf PRODUCT DESCRIPTION HCM380B / HCM385B is a high-precision 3D compass sensor, and the protection reaches IP67 level. Using advanced hard and soft iron calibration algorithms, make any tool surface with a roll angle of 360 ° can still provide high-precision heading information. With the characteristics of small size and low power consumption, it is more suitable for today's miniaturized sensitive measurement systems.

SDC620B-N HIGH-PRECISION DIGITAL DISPLAY 3D ELECTRONIC COMPASS.pdf ▶ PRODUCT INTRODUCTION SDC620B-N is a new three-dimensional all-attitude compass launched by RION Technology. The product applies fluxgate technology. It is a high-precision three-dimensional compass with high resolution, strong anti-noise ability and stable temperature deviation. Advanced hard-iron and soft-iron calibration algorithms are used, as well as high-precision accelerometers for tilt compensation,

LCM370B LCM375B-N HIGH ACCURACY 3D DIGITAL COMPASS.pdf INTRODUCTION LCM370B/LCM375B-N is a low power high accuracy 3D digital compass of strip shape, its width is only 1.6cm, IP67 protection grade, suitable for many harsh environment such as drilling measurement. it adopts advanced hard iron and soft iron calibration algorithm, it can provide the high precision heading value output when both pitch and roll angle at any angle within 360°. it is small and low power consumption,

▶ INTRODUCTION DCM250B/260B is a low-cost three-dimensional electronic compass, using hard and soft magnetic calibration algorithm, so that the compass can eliminate the influence of magnetic field through the calibration algorithm in the environment with magnetic field interference. The DCM250B&260B integrates a three-axis fluxgate sensor, calculates the heading in real time through the central processor, and uses a three-axis accelerometer to perform heading compensation

HCM370B HCM375B-N HIGH ACCURACY 3D DIGITAL COMPASS.pdf INTRODUCTION The HCM370B/HCM375 B-N is a high-precision three-dimensional compass with high resolution, strong noise immunity and stable temperature offset. It uses advanced hard and soft iron calibration algorithms and uses high-precision accelerometer for tilt compensation, so that its roll angle can provide high-precision heading information at any tool face of 360°. In the environment with fixed interference, this

▶ PRODUCT DESCRIPTION DDM365B is a three-dimensional dynamic electronic compass that integrates a 12 axis inertial measurement unit, including three-axis attitude angle, three-axis accelerometer, three-axis gyroscope, and three-axis magnetic induction technology. By utilizing the high dynamic angle characteristics of gyroscopes and the high stability attitude characteristics of accelerometer, the pitch and roll angles that follow complex attitude changes are obtained through

DDM360 3D dynamic electronic compass with inclination compensation RION Product Description: DDM350B / DDM360B is a three-dimensional dynamic electronic compass, which integrates a 9-axis inertial measurement unit, including a three-axis accelerometer, a three-axis gyroscope, and a three-axis fluxgate. Utilizing the high dynamic angle characteristics of the gyroscope and the highly stable attitude characteristics of the accelerometer, the pitch and roll angles that follow the

DCM260B 3D Digital Compass with Standard Interfaces electronic compass​ General Description DCM250B/260B is a low-cost three-dimensional electronic compass, using hard and soft magnetic calibration algorithm, so that the compass can eliminate the influence of magnetic field through the calibration algorithm in the environment with magnetic field interference. The DCM250B&260B integrates a three-axis fluxgate sensor, calculates the heading in real time through the central

DCM301B Digital Compass PCBA Compass sensor Module For Special occasion robot General Description DCM301B is a high precision 3D electronic compass using the 2D plane calibration algorithm, various output mode, standard interfaces including RS232/RS485/TTL and other interfaces, and accept other communication interface customization. DCM301B with small size, low power consumption, can be used for the antenna stability, vehicles, systems integration and other more fields , high

DDM360 3 Axis Gyro Compass Sensor 0.1 Degree Resolution For Heading Angle Finding ▶ MAIN FEATURES ★ Inclination angle measurement range: pitch ±85°, roll angle ±180° ★ With hard magnetic, soft magnetic and tilt angle compensation ★ Standard RS232/RS485/TTL output interface ★ Azimuth angle accuracy: 0.8° ★ Inclination resolution: 0.1° ★ Inclination accuracy: 0.2° ★ Wide temp. range: -40℃～+85℃ ★ Dimension: L55×W37×H24mm ★ DC 5V power supply ★ IP67 waterproof rating ▶ APPLICATIO

DCM250B Low Power TLL 3D Digital Compass Sensor Board With 0.8deg Heading Accuracy ▶ MAIN FEATURES ★ Heading accuracy: 0.8° ★ Inclination measurement range: ±85° ★ Inclination resolution: 0.1° ★ Inclination accuracy: 0.2° ★ Temperature range: -40℃～+85℃ ★ DC 5V power supply ★ With hard magnetic, soft magnetic and tilt compensation ★ Standard RS232/RS485/TTL output interface ▶ APPLICATION ★ Satellite antenna searching ★ Navigation surveying ★ GPS combined navigation ★ Antenna

DDM360B Dynamic 3D Digital Electronic Compass Sensor DDM360B High Reliable ▶ MAIN FEATURES ★ Inclination angle measurement range: pitch ±85°, roll angle ±180° ★ With hard magnetic, soft magnetic and tilt angle compensation ★ Standard RS232/RS485/TTL output interface ★ Azimuth angle accuracy: 0.8° ★ Inclination resolution: 0.1° ★ Inclination accuracy: 0.2° ★ Wide temp. range: -40℃～+85℃ ★ Dimesion: L55×W37×H24mm ★ DC 5V power supply ★ IP67 waterproof rating ▶ PRODUCT DESCRIPTIO

DCM302B High Accuracy 3D Compass Inclinometer For Antenna Stabilization DCM302B High Accuracy 3D Compass Inclinometer for Antenna Stabilization & Vehicle Navigation Product Introduction The DCM301B/DCM302B is a high-precision 3D electronic compass utilizing a two-dimensional plane calibration algorithm. This innovative calibration process requires only planar rotation in place, eliminating the need for complex three-dimensional attitude tilt adjustments. With advanced hard

SDC620B Endurance 3D Digital Compass Sensor for GPS Integrated Navigation Product Description The SDC620B Endurance 3D Digital Compass Sensor is a high-precision navigation instrument designed for GPS integrated systems, offering exceptional accuracy and durability in various environmental conditions. Key Features Heading angle accuracy: 0.3° ~ 0.5° Angle compensation range: ±85° Soft and hard magnetic field calibration 360° heading angle measurement range 60 hours continuous