Ferro Silicon Alloy

Ferro Silicon Use In Steel Industry Rapid Dissolution Low Impurity For Smelting Efficiency In the steel industry, high-purity ferrosilicon (often 75% Si or higher) is valued for its rapid dissolution and low impurity levels, enabling efficient deoxidation, alloying, and smelting operations. Product Properties Property Typical Specification Si content ≥ 75% (premium grades up to 90%) Purity Low Al, Ca, C, P, S Form Lump, granule, or powder Dissolution rate Fast (seconds to

Iron Silicon Alloy 68 Silicon Dense Chunks Silver Grey For Ferroalloy Manufacturing Process Iron Silicon Alloy 68% contains approximately 68% silicon and is manufactured in dense chunks with a distinctive silver-grey metallic appearance. This balanced composition and robust form make it an ideal raw material for ferroalloy manufacturing processes requiring controlled silicon addition. Product Specifications Property Typical Specification Si content ~66-70% (nominal 68%) Form

Ferro Silicon Alloy 72 Grade Solid Lumps Deep Grey Applied In Steel Desulphurization Works Ferro Silicon Alloy 72 Grade contains approximately 72% silicon with the balance iron and minimal impurities. It is produced as solid deep grey lumps, typically sized 10-80 mm, and is widely used in steel desulphurization processes to lower sulphur content and improve steel cleanliness. Property Typical Specification Si content ~70-74% (nominal 72%) Form Solid irregular lumps Color Deep

FeSi Alloy Granules 70 Percent Silicon Bright Grey For Nodular Cast Iron Inoculation Process FeSi Alloy 70% granules contain around 70% silicon, with a bright grey metallic finish and granular form (typically 1-10 mm). They are engineered for nodular cast iron inoculation, promoting uniform graphite nodule formation and reducing chill. Product Specifications Property Typical Specification Si content ~68-72% (nominal 70%) Form Granules/spheroids Color Bright grey metallic

Ferrosilicon Powder 180 Mesh Ultra Fine Charcoal Grey Ferrosilicon Powder 180 mesh is an ultra-fine ferroalloy with silicon content typically 65-75%, appearing charcoal grey due to fine metallic particles. The −180 mesh size (≤75 µm) ensures rapid dissolution and uniform distribution in welding flux and other metallurgical applications. Product Specifications Property Typical Specification Si content 65-75% (grade dependent) Form Ultra fine dry powder Color Charcoal grey

Ferro Silicon 75 Lumps High Reactivity Grey Metallic For Steel Industry Deoxidizer And Alloying Ferro Silicon 75 lumps contain approximately 75% silicon, with the balance iron and minimal impurities. Their grey metallic appearance reflects high iron content and dense structure. Known for high reactivity, this grade is a staple deoxidizer and alloying agent in the steel industry. Property Typical Specification Si content ~73-78% (nominal 75%) Form Irregular dense lumps (10-80

Iron Silicon Alloy With 75 Silicon Content Dark Silver Powder For Premium Alloy Steel Mills Iron Silicon Alloy 75% is a high-silicon ferroalloy in dark silver powder form, containing about 75% silicon with minimal impurities. Its fine particle size allows rapid dissolution, making it ideal for premium alloy steel mills requiring precise silicon control. Property Typical Specification Si content ~73-78% (nominal 75%) Form Fine powder (often −100 to −200 mesh) Color Dark silver

Ferro Silicon 73 Briquette Metallic Grey For Steel Deoxidation And Strength Enhancement Ferro Silicon 73 Briquette is a medium-silicon ferroalloy containing approximately 73% silicon, pressed into dense blocks with a metallic grey appearance. Its briquette form ensures easy handling, reduced dust, and precise dosing in steel deoxidation and alloying processes. Property Typical Specification Si content ~71-75% (nominal 73%) Form Briquette (rectangular block) Color Metallic

FeSi Alloy 68 Grade Granules Heavy Density For Casting Modification And Nodule Formation FeSi Alloy 68% granules contain approximately 68% silicon with a heavy density (≈5.0-5.2 g/cm³) and are specially sized (typically 1-10 mm) for casting modification and nodular graphite formation in iron foundries. Property Typical Specification Si content ~66-70% (nominal 68%) Form Granules/spheroids Color Metallic grey-silver Density High (≈5.0-5.2 g/cm³) Main use Inoculation,

Ferrosilicon Powder Micro Fine 400 Mesh Silver Black For Specialty Welding Consumables Ferrosilicon Powder 400 mesh is an ultra-fine ferroalloy with silicon content typically 65-75%, appearing silver-black due to fine metallic particles. The -400 mesh size (≤38 µm) ensures rapid fusion and uniform distribution in specialty welding consumables. Property Typical Specification Si content 65-75% (grade dependent) Form Micro fine dry powder Color Silver-black sheen Particle size

Ferro Silicon Alloy Uniform Chunk Size 72 Content Black Grey For Steel Plant Refining Use Ferro Silicon Alloy 72% is a medium-silicon ferroalloy with uniform chunk size (typically 10-50 mm), approximately 72% silicon content, and a black-grey metallic appearance. Designed specifically for steel plant refining applications, its regular geometry ensures predictable dissolution rates and precise alloy addition. Product Properties Property Typical Specification Si content ~70-74%

Iron Silicon 70 Lumps Iron Silicon 70 lumps contain approximately 70% silicon, featuring a robust grey metallic structure specifically designed for iron ore reduction and alloying operations in primary metallurgy. The sturdy lump form resists breakdown during handling and high-temperature processing. Product Specifications Property Typical Specification Si content ~68-72% (nominal 70%) Form Solid robust lumps Color Grey metallic Density ~4.7-5.0 g/cm³ Main uses Iron ore

Ferro Silicon 75 Fine Powder Light Grey For Brazing Paste And High Grade Steel Production Ferro Silicon 75 fine powder contains about 75% silicon, with ultrafine particle size (often −100 to −200 mesh), exhibiting a light grey color. This high-purity powder is tailored for brazing paste formulations and high-grade steel production where rapid, uniform alloying is essential. Property Typical Specification Si content ~73-78% (nominal 75%) Form Fine dry powder Color Light grey

Ferrosilicon Price Stable 73 Silicon Lumps For Quality Deoxidizer In Foundry Applications Ferrosilicon 73% lumps are a medium-silicon ferroalloy with approximately 73% silicon and the balance iron, produced in dense, irregular lump form. Recognized for stable market pricing, this grade is widely used in foundry applications as a dependable deoxidizer and alloying agent. Property Typical Specification Si content ~71-75% (nominal 73%) Form Dense lumps (10-80 mm) Color Grey

Ferro Silicon Use In Steel Industry Fast Dissolving High Purity For Efficient Smelting Process In the steel industry, high-purity ferrosilicon (often 75% Si or higher) is valued for its fast dissolution in molten metal, enabling efficient deoxidation, alloying, and process control during smelting. Property Typical Specification Si content ≥ 75% (premium grades up to 90%) Purity Low Al, Ca, C, P, S Form Lump, granule, or powder Dissolution rate Fast (seconds to minutes) Main

Iron Silicon Alloy 68 Percent Briquette Silver-colored ferrosilicon briquette containing approximately 68% silicon, specifically designed for steel desulfurization and nodulizing applications. The briquette form ensures easy storage, transport, and precise dosing in metallurgical processes. Product Specifications Property Typical Specification Si content ~66-70% (nominal 68%) Form Briquette (rectangular block) Color Bright silver metallic Density ~5.0-5.2 g/cm³ Impurities

Ferro Silicon Alloy 72 Grade Dense Lumps Dark Grey Used In Ferrous Metallurgy Industry Ferro Silicon Alloy 72 Grade contains approximately 72% silicon with the balance mainly iron, plus minimal impurities. It is produced as dense dark-grey lumps, typically sized 10-80 mm, and is a staple material in the ferrous metallurgy industry for both primary smelting and ladle refining. Property Typical Specification Si content ~70-74% (nominal 72%) Form Dense irregular lumps Color Dark

FeSi Alloy Granules 70 Silicon Content Metallic Silver For Cast Iron Spheroidization Process FeSi 70 alloy granules contain about 70% silicon, with the balance iron and trace elements, and exhibit a bright metallic silver color. Their granular form (typically 1-10 mm) is optimized for controlled dosing during the spheroidization treatment of cast iron. Product Specifications Property Typical Specification Si content ~68-72% (nominal 70%) Form Granules/spheroids Color Metallic

Ferrosilicon Powder 150 Mesh Fine Grey Material For Arc Welding Rod And Alloy Additive Ferrosilicon powder (150 mesh) is a finely ground ferroalloy with approximately 45-75% silicon content, depending on grade. This uniform grey powder features a fine particle size that ensures rapid dissolution and homogeneous distribution in welding rod coatings and specialty alloys. Property Typical Specification Si content 45-75% (grade dependent) Particle size −150 mesh (≤106 µm) Form

Ferro Silicon 75 Lumps High Carbon Low Aluminium Grey Black For Steelmaking Deoxidizer Ferro Silicon 75 lumps are a medium-carbon, low-aluminium ferroalloy containing approximately 75% silicon by weight, with the remainder mainly iron and controlled levels of carbon and aluminium. Their grey-black metallic appearance reflects the dense, solid form ideal for bulk addition in steelmaking furnaces. Property Typical Specification Si content ~72-78% (nominal 75%) C content Medium