Gymnastics Equipment

Rhythmic Gymnastics Ribbon Material: Ribbon and pole are made of FRP, the handle is made of pvc material.

Rhythmic Floor 1.Whole Size: 1450cm×1450cm; performance area size: 1300cm×1300cm including5cm wide demarcation line that distinguishes performance area and safety area. The surface is covered with velvet knitted carpet, with each roll being 1450cm×362cm, a total of 4 rolls. The bottom is connected by strong adhesive tapes. 2.The whole structure consists of 2 layers of 0.9cm high-quality plywood, and the upper layer is made up of 100 pieces of 122cm×122cm, 40 pieces of 122cm

Artistic Floor 1.The surface size is 1400cm×1400cm, the size of the competition area is 1200cm×1200cm, and the diagonal size is 1697cm. The competition area is clearly distinguished from the safety area. 2.The flexible layer is composed of EV30 material with a thickness of 6cm, which has obvious shock absorption effect and increased safety. 3.The bottom plate is made of 1.3cm high quality birch wood multi-layer board, the surface is made of high quality glass fiber by high

Artistic Floor 1. Whole size is 1410cm×1410cm,competition area is 1200cm×1200cm,Diagonal length is 1697cm,There is a clear distinction between the competition area and the safety area. The surface is a blanket combination and the bottom is connected with a buckle. 2. The cushion mats adopts 5cm thick XPE letter tooth connection, the bottom has 72 laminate plates precisely according to the installation, 2304 spring composition, the surrounding belt weil, to achieve the best

Cart for Balance Beam Features: The balance beam can be easily transferred, equipped with high load industrial casters, not only ensure that the equipment can move freely and to protect the site.

Soft Mat for Balance Beam Specification 100cm×50cm×2cm, 120cm×40cm×2cm Features: Good stability, easy to install, soft surface, Composite Material Balance Beam appropriate flexibility, used with balance beam.

Balance Beam Protection Cover Features: It has good stability and flexibility, convenient installation, comfortable cushion surface. It is essential for the competition events hold by FIG.

Gymnastics Low Balance Beam Length: 500cm 300cm 250cm Width: 10cm 10cm 10cm Beam Height: 16cm 16cm 16cm Total Height: 25cm 25cm 25cm Material: The upper end of the infill is stuck with high-density rubber sponge and covered with special fiber leather. Feature: The moisture absorbing surface provides good shock-absorption.special rubber shock-absorption system increases the overall elasticity of horizontal bar, fast and secure locking. Preformed foam end plugs maximize the

Gymnastics Low Balance Beam Beam Length: 500cm 300cm 250cm Upper Width: 10cm 10cm 10cm Height: 16cm 16cm 16cm Overall Height: 40cm 40cm 40cm Features: The beam is covered with special fiber leather and hygroscopic material, with better damping effect. Special rubber damping system to increase the overall flexibility of the beam, the plum-shaped handle can adjust the distance between the legs of the beam quickly, fast and solid locking, and foam end block to maximize the

Gymnastics Balance Beam for Training 1. Beam length is 500cm, upper width is 10cm, and height is 16cm, covered with special fiber leather and hygroscopic material, with better damping effect. 2. Height adjustment scope is between 70cm-125cm, with each increment of 5cm. 3. The metal part of the bracket is welded with an oval tube, which is much safe and stable to use. Features: Special rubber damping system to increase the overall flexibility of the beam, the handle can

Gymnastics Balance Beam 1. Beam length is 500cm, upper width is 10cm, and height is 16cm. Infill material: aluminum alloy. Adhered with high-density rubber sponge on the top and covered with special fiber leather and hygroscopic material, for better dampingeffect. 2. The columns are welded with high-quality steel tubes of 5cm×10cm and 6cm×0.4cm. Two oval-shaped special locking systems make the height adjustment much convenient. 3. Height adjustment scope is between 70cm-125cm

Gymnastics Palm Glove Specifications: Small (Palm length 9-10cm), medium (Palm length 10-11cm), large (Palm length 11-12cm) Material: Full grain leather. Features: Anti-slip and wear-resistant, used for wrist and palm protection in gymnastics and horizontal barexercise.

Gymnastics Bar U Protection cover mat Specification: Length 140cm, height 10cm, inner diameter 5cm. Material: Infill with high load-bearing sponge, surface with PVC warp knitting fabric. Features: There are handles on the side part, with it you can pull out the protection quickly and easily. Applicable for horizontal bar, parallel bar and uneven bar.

Gymnastics Bar Protection cover mat Specification: Length 140cm, outer diameter 11cm , inner diameter 5cm. Material: Infill with high load-bearing sponge, surface with PVC warp knitting fabric. Colors: Customized.

360° Tossing Bracket 1. Overall height: 640cm; distance between two columns: 240cm; belt lifting height can be adjusted. 2. The leather belt is equipped with a rotating devicehanging n the top of the frame by nylon rope. 3. The pull system is made of φ0.6cm diameter stainless steel rope, which is equipped with quick rope tightening device to guarantee quick rope tensioning. Features: The leather belt rotating device hanging on the frame top can reach the ground through the

Standard Uneven Bar Counterweight Bracket Specification: The fixed distance of wire rope is 400cm×550cm; the weight of single counterweight is not less than 800kg. Material: The counterweight is made of high quality carbon steel, and the frame is made of welded square tube 5cm×0.3cm. Features: Suitable for weightless venues. The overall assembly structure makes it easy to move.

Uneven Bars Protection Bench Specification: The platform is 100cm long and 45cm wide. Weight: 30.5kg Material: The supporting platform surface is covered with special fiber leather. The built-in body is high strength plywood, and the upper part is affixed with high load-bearing sponge. It is equipped with a special adjustment lock handle, which can adjust the height of the support platform quickly and easily. Features: Special fiber leather ensures moisture absorption. the

Elastic Handstand Rotation for Training Specification: Bar length: 170cm; Bar diameter: 4cm. The height of bar is adjustable from 95cm to 135cm, the width of bar between elastics parts is stepless. Material: High quality glass reinforced plastic with wooden cover. Elastic components are rubber band with high loadbearing sponge, covered with PU leather, bonded by Velcro, with good overall elasticity. Features: The column is equipped with special locking lifting handle, which

Horizontal Bar Support 1. Bar length: 240cm; Bar diameter: 4cm; material: high quality glass reinforced plastic with wooden cover. 2. larger chassis is equipped with non-slip rubber pad. 3. Height: 40cm. Features: Larger chassis enhance the overall stability of the equipment. Consists of bar, columns and the base, to ensure the overall stability.

Horizontal Bar Support 1. Bar diameter: 4cm; length: 240cm; material: high quality glass reinforced plastic with wooden cover. 2. Tension system is made of φ0.6cm stainless steel wire, equipped with quick tightening device to guarantee quick tension adjustment. 3. Height adjustment: 145cm-255cm. Features: High stability and safety, better rail elasticity, tension system ensures the overall stability of the bar. Consists of bar, columns, base, and tension system, to ensure the