Fiber Optic Tools And Equipment

Product overview 2 IN 1 Fiber Optic Power meter with 5km Laser source Visual Fault locator.This kind calibration type optical power meter is for handheld installation, operation and maintenance of optical fiber network special design of a precise, durable, convenient portable test instrument. With clever appearance, can choose to switch back light display, automatic shutdown function, super wide optical power test range, accurate testing accuracy and new users auto-calibratio

Manual ribbon fiber thermal stripper Fiber Optic Equipment Tools Fiber Stripper Fast Heat Thermal Stripper For Single Core And Multi Cores Fiber Stripper This Thermal Stripper is a newly developed hand-held thermal stripper, specially designed for nondestructive thermal stripping of the jacket of single fiber and ribbon cable up to 12 fibers. A good and reliable tool for ribbon fiber splicing work. Features Apply to single fibers 4 levels temperature optional Normal and Power

Fiber optic equipment tools Single core Single mode Multi mode Silica Fiber Single-core V groove Features: 1. Low splice loss, good consistency; 2. Small in dimensions, light weight, easy to operate. Applicable fiber single-core single-mode, multi-mode silica fiber; fiber diameter 125μm Splice loss 0.2dB Operation temp -10 ℃-40 ℃ Size 92(mm)*60(mm)*28(mm) Weight 360g Company Profile PACKING&SHIPPING

Optical Fiber Communication Connecting Tool High Quality Fibra optica equipment tools Fiber aligner Features: 1. Low splice loss, good consistency; 2. Small in dimensions, light weight, easy to operate. Applicable fiber 12-core ribbon optical fiber fiber diameter 125μm Splice loss 0.5dB Operation temp -10 ℃-40 ℃ Size 140(mm)*80(mm)*77(mm) Weight 875g Company Profile PACKING&SHIPPING

Features a) Adopt high-quality guide rail, precision-class ceramic V-groove and head, low splice loss, and good consistency. b) small size, light weight, easy to operate. Product characteristics Applicable fiber: 250μm and 900μm fibers; clad-fiber diameter: 125μm; Splice loss: For 160A, splice loss is not more than 0.05dB; for 160F, splice loss not more than 0.03dB Operation procedure 1. Turn on the light source and the test instrument 30 minutes in advance, then connect the

FTTH FTTX Fiber optic equipment tools Single-Core Aligner Single-Core Optical Fiber Aligne Features a) Adopt high-quality guide rail, precision-class ceramic V-groove and head, low splice loss, and good consistency. b) small size, light weight, easy to operate. Product characteristics Applicable fiber: 250μm and 900μm fibers; clad-fiber diameter: 125μm; Splice loss: For 160A, splice loss is not more than 0.05dB; for 160F, splice loss not more than 0.03dB Operation procedure 1

FTTH Handheld power meter Fiber optic laser light source Stabilized light source Product overview stabilized light source can provide 2 wavelength stable output according to user's requirement, and provide dual wavelength output of 1310nm and 1550nm to single mode optical fiber measurement. It is an ideal test instrument for optical fiber engineering. Product characteristics High stability multi wavelength single mode laser output, CW mode or modulation mode LCD shows the

Original Bundle Tube Loose Casing Optical Fiber Cable Stripping Tool Cable Cutter Longitudinal Stripper Mini fiber optic cable slitter Mini fiber optic cable slitter is an efficient and portable tool, which can slits the PVC cable jacket into two halves easily. The consistency is resulted with this precise and innovative tool. 1. Four guide rails for tubes with different diameters. Ø 1.5~Ø 1.9mm | Ø 2.0~Ø 2.4mm | Ø 2.5~Ø 2.9mm | Ø 3.0~Ø 3.3mm 2. Composed with high quality

Manufacturer 5200mA Splicing Machine 13MMT S1 Fiber Optic Fusion Splicer Optical fiber fusion splicer is mainly used for the construction and maintenance of optical fiber cable in optical communication,so it is also called optical cable welding machine. The general working principle is to melt the cross-section of two optical fibers by high-voltage arc, and at the same time, use high-precision motion mechanism to gently push the two optical fibers into one, so as to realize

Use for Cutting Steel Strip Multiple Function Combination Banding and Strapping Tools Introduction * Tensions over 2,400 lbs of force and cuts off the tail of the clamp being formed * Used to apply Stainless Steel Band, Galvanized Carbon Steel Band, BAND-FAST, general use band and miscellaneous strapping * Drop forged tool with built in cutter * Spring loaded gripper lever improves ease of use * Blue, epoxy powder coated finish resists corrosive elements Product name

Introduction: 650nm visual fault locator has the function of fiber identification and faults locator of SM or MM fiber, it is a helpful assistant to dead zone of OTDR, it is also a basic maintenance tool for fiber network, LAN, ATM fiber system and telecom network system. Features: Support CW and 2Hz modulation work mode Solid: use special laser end design to avoid damage when dropping on the floor. Long working hours: use effective laser drive circuit to ensure 1mW/650nm

Introduction: The tool design is suitable for multi-core cables with sheathed or armored jackets. Its main purpose is to cut off the armor sheath of the outer layer of the cable to obtain the internal fiber optic cable. Features: 1.Adjustable stripping outer diameter 8-28.6mm, cutting depth 5.5 mm. 2.Tool slits outer polyethylene jacket and armor in one operation. 3.Rotate the toggleswitch to switch between longitudinal and transverse blade for corresponding longitudinal and

Optical Fiber Cable Cutter The longitudinal fiber sheath slitter is an ideal tool for the construction and maintenance of fiber optic projects. It is applicable either at the beginning or in the middle of the cable. The cutter is composed of handle, serrated gripper, double blade and eccentric unit (four adjustable positions for the cable with different thickness). Additional attachable pieces available for standard optical fiber cable and cables with small diameter.

Fiber Optic Longitudinal Cable Cutter Fiber Jacket Stripping Tool Longitudinal center pipe stripping tool stripper slitter. The blade adopts a special super alloy, sharp knife-edge, smooth edge. Brand new upgrade to open the lid designed to facilitate insertion of optical cables. Can longitudinally strip fiber bundle tubes with diameters of 4.5mm, 6mm, 7mm, 8mm, and 11mm - Easy to open the cable without damaging the optical fiber, Convenient and effortless. Weight: 120g Size:

Clean Stick A stick , used for cleaning end-faces inside the plug-in fiber-optic connectors and various adaptors and connectors . Suitable for cleaning inside adaptors due to dust control. Specification of Cleaning Stick Type ø2.5mm Type ø1.25mm Connectors Cleaned: SC, SC2, FC, ST, DIN, D4 MU, LC, MT Environment Operation Temperature: -20°C to 60°C Humidity 20% to 80%H Preservation Temperature -20°C to 60°C Size: ø2.5mm 146mm (Length) ø1.25mm 100mm (Length) Type Clean Stick

Clean Stick A stick , used for cleaning end-faces inside the plug-in fiber-optic connectors and various adaptors and connectors . Suitable for cleaning inside adaptors due to dust control. Specification of Cleaning Stick Type ø2.5mm Type ø1.25mm Connectors Cleaned: SC, SC2, FC, ST, DIN, D4 MU, LC, MT Environment Operation Temperature: -20°C to 60°C Humidity 20% to 80%H Preservation Temperature -20°C to 60°C Size: ø2.5mm 146mm (Length) ø1.25mm 100mm (Length) Type Clean Stick

High Quality Cleans 500 Connector per cartridge SC FC LC ST MU MT D4 DIN Optic Fiber Connector Cleaner Optic Fiber Connector Cleaner is an easy-to-use option for cleaning connectors on jumpers and in adapters. Optic Fiber Connector Cleaner is a must-have for field technicians. Small enough to fit in a shirt pocket and a great addition to cleaning kits. Features Safe and environment friendly: No chemicals and other waste such as alcohol, methanol, cotton tips or lenstissue;

Features Safe and environment friendly: No chemicals and other waste such as alcohol, methanol, cotton tips or lenstissue; Safe to operator and no hazard to environment; No ESD contamination. User friendly: With few simple steps, ideal cleaning result can be achieved,whether the connector iscontaminated by oil or dust. Excellent result: Fast, effective, repeatable cleanings. Economical: New design for low cost; One unit is good for over 500 cleaning; the cartridge is

ONE CLICK CLEANER-MPO/MTP The MPO Cleaner is a high-performance device designed for cleaning the ferrule end-faces of MPO & MTP connectors. Cost effective tool for cleaning fiber end-faces without the use of alcohol. It saves time by effectively cleaning all 12 fibers at once. The MPO connector cleaner is designed to clean both exposed jumper ends and connectors in Adapters. Features Effective on a variety of contaminates including dust and oils. Intermateability with FOCIS-5

ONE-CLICK CLEANER(LC/MU) The One-Click Cleaner is an easy-to-use option for cleaning connectors on jumpers and in adapters. Simply insert the One-Click Cleaner into an adapter and push until an audible “click” is heard. The One-Click Cleaner uses the mechanical push action to advance an optical grade cleaning tape while the cleaning tip is rotated to ensure the fiber end-face is effectively, but gently cleaned. The One-Click Cleaner is a must-have for field technicians. Small