Fiber Optic Switch

4x4 1260~1670nm rack optical switch 4x4 module latching 250um FC/PC connector or other A 4x4 optical switch.pptx ◇ features Metropolitan Area Network R&D in Laboratory System Monitoring Configurable OADM ◇ Application: Low Insertion Loss Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Latching and Non-latching ◇specification Parameters OSW-4×4 Wavelength Range nm 650～1310 1260～1670 Testing Wavelength nm 650/780/850/980/1064/1310

19-inch standrad 1U Rack 1x16 optical switch single mode and multimode B 1x16 rack optical switch.pptx Description: Optical switch is an optical path control device, which plays the role of controlling the optical path and converting the optical path. It plays an important role in optical communication applications. Optical switches are mainly used in: multi-channel optical monitoring in optical transmission systems, automatic switching of LAN multi-light sources/detectors,

1x8 MEMS Optical Switch up to 64 channels 850 nm with high stability as well as an unmatched low costH 1x 8 mems Optical Switch.pptx Description: The MEMS 1x8 Fiber optic switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a patent pending MEMS configuration and activated via an electrical control signal. It uniquely features rugged thermal activated micro-mirror movements instead of rotation, and

1X32 MEMS optical switch 1310 nm FC/APC connector High switching speedA 1x N MEMS Optical Switch.pptx Description: The MEMS Latch Series 1x8 Fiber optic switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a patent pending MEMS configuration and activated via an electrical control signal. It uniquely features rugged thermal activated micro-mirror movements instead of rotation, and latches to preserve the

1x2 MEMS optical switch 1260-1650 nm base on MEMS technology Channel Monitor B 1XN MEMS Optical Switch-case type.pptx Features: Base on MEMS technology Small package High Stability, High Reliability Epoxy-free on Optical Path Non-latching Application: DWDM networks Channel Monitor R&D in Laboratory Configurable OADM Specifications: Parameters Unit SUN-FSW-MEMS-1xN(

MEMS Latch Series 1x4 Fiber optic switch 1260～1620 nm fiber diameter 250um C MEMS1X4 Optical Switch.pptx Description The MEMS Latch Series 1x4 Fiber optic switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a patent pending MEMS configuration and activated via an electrical control signal. It uniquely features rugged thermal activated micro-mirror movements instead of rotation, and latches to preserve

2x2 MEMS optical Switch fiber dia 250um or 900um wavelength 1310/1550 nm and other E MEMS2X2 Optical Switch.ppt..pptx Features: Application High Reliability Channel Blocking Latching Configurable Add/Drop Intrinsic tolerance to ESD Instrumentation Description The MEMS Latch Series 1x8 Fiber optic switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a patent pending MEMS configuration and activated via an

The MEMS Latch Series 4x4 Fiber optic switch connects optical channels by redirectingF MEMS4X4 Optical Switch.pptx Specifications: Parameters MSW-4x4 Wavelength Range nm 1260～1620 Testing Wavelength nm 1310/1490/1550/1625/1650 Insertion Loss dB Typ:0.7 ,Max:1.2 Return Loss dB ≥50 Crosstalk dB ≥50 PDL dB ≤0.10 WDL dB ≤0.25 TDL dB ≤0.20 Repeatability dB ≤±0.05 Repeatability Rate Hz 20 Lifetime Cycle ≥109 Switch Time ms ≤5 Transmission Power mW ≤500 Operation Temperature ℃ -5～

1260-1610nm 1x4 Mechanical Fiber Optical Switch Single Mode Non-Latching For Future Telecommunication B 1x4 MechanicalOptical Switch.pptx ◇Description The Series 1x4 fiber optic switch connects optical channels by redirecting an in- coming optical signal into a selected output fiber. This is achieved by using a patent pending opto-mechanical configuration activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal

1x8 optical switch low loss and high reliability tube type 2mm china B 1x8 Optical Switch.pptx◇ description Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable

4x4 fiber optical switch 0.25mm 0.9mm Fiber Optic with SC FC LC ST ConnectorA 4x4 optical switch.pptx ◇ features Metropolitan Area Network R&D in Laboratory System Monitoring Configurable OADM ◇ Application: Low Insertion Loss Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Latching and Non-latching ◇specification Parameters OSW-4×4 Wavelength Range nm 650～1310 1260～1670 Testing Wavelength nm 650/780/850/980/1064/1310 1310/1490

High Performance 128 Channel Fiber Optic 1xN Passive Optical Switch A 1xN optical switch.pptx ◇ features More Than 128 Channels ·Low Loss and High Reliability ·Parallel Interface (TTL) ·Modularized Design ·Epoxy-free on Optical Path ◇ Application: ·Ring Network ·Remote Monitoring in Optical Network ·Testing of Fiber, Optical Component description 1×N Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission

1x16 rack-mounted optical switch 750-850 nm monitoring port RS-232 1U A rack 1x16 rack optical switch.pptx Description: 1×N rack-mounted optical switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/

TAP PD (Spectral Detector) Product Description TAP PD (Spectral Detector) adopts a double-core pigtail structure, which is split through a beam splitter, a certain proportion of the light is coupled to the photodetector, and the rest of the light is reflected to another fiber. Features Low additional loss, high reliability Arbitrary split ratio. Applications DWDM link monitoring EDFA light output monitoring light switch Optical Communication Measurement Equipment ​ optical

1xN High Reliability Optical Switches, 1x4 1x8 1x16 1x32 1x64 ,Ring Network ·Remote Monitoring in Optical Network 1×N Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor

4×4 Optical Switch Low insertion,high wavelength range(650～1310,1260-1670),forMetropolitan Area Network Application Metropolitan Area Network R&D in Laboratory System Monitoring Configurable OADM Features Low Insertion Loss Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Latching and Non-latching Performance Parameters OSW-4×4 Wavelength Range nm 650～1310 1260～1670 Testing Wavelength nm 650/780/850/980/1064/1310 1310/1490/1550

1X8&1x32 Rack mount Optical Switch,FITL/Automatic Measurement with RS232 Control and RJ45 Ethernet Remote Management Description: 1×8 rack-mounted optical switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light

Rack 1×N(N≤ 16) Optical Switch for Automatic Measurement ,Optical Network Remote Monitoring with LED display panel Introduction: 1×N rack-mounted optical switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light

OSW1×2T Optical Switch,System Monitoring,R&D in Laboratory,MAN (Metropolitan Area Network),with Wide Wavelength Range Description: OSW1×2T Optical Switch, which is famous for its high performance, low insertion loss and compact dimension: (L)27.0×(W)12.0×(H)8.2mm. It is an ideal Component for OADM,OXC,system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system. Features: ·Low Insertion Loss ·Wide

Dual 1×2 Optical Switch,R&D in Laboratory,Configurable OADM,R&D in Laboratory,with Epoxy-free on Optical Path ◇Description: OSW-D1X2 Optical Switch, which is famous for its high performance, low insertion loss and compact dimension: (L)27×(W)12.6×(H)8.5(±0.2)mm. It is an ideal component for OADM,R&D in Laboratory,system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system. ◇Features Low Insertion Loss