Land Rover Auto Parts

Product Overview Genuine OE-grade right-hand (passenger side) intercooler air duct trim for the for Land Rover Range Rover Sport L494, manufactured from 2014 onwards. This component, also referred to as a radiator air deflector, sits on the front right side of the vehicle and channels cooling air towards the intercooler and radiator, supporting consistent engine performance and thermal stability. It also masks sensitive structural zones and provides an aesthetic finish to the

Product Overview The Viscous Fan Assembly LR023392 is an OE-grade engine cooling system component designed for select for Land Rover vehicles equipped with the 3.0L TDV6 diesel engine-. This complete assembly combines a viscous fan clutch with a multi-blade fan (9 blades), providing temperature-regulated cooling airflow through the radiator-. LR023392 supersedes LR013695 and LR021990. Key Features Complete viscous fan assembly – fan clutch and blades in one unit Temperature

Product Overview Genuine OE-grade front left (driver side) driveshaft / CV axle assembly for for Land Rover vehicles. This complete assembly transmits power from the front differential to the left front wheel via constant velocity (CV) joints, enabling smooth torque delivery even at steering angles. LR064252 is the current part number, superseding LR034532, LR041970, and LR045440. Key Features Complete assembly – includes inner shaft and outer CV joint- Front left (driver

Product Overview Genuine OE-grade thermostat and housing assembly for for Land Rover LR2 / Freelander 2 (L359) with the 3.2L inline-6 petrol engine.This critical cooling system component regulates the flow of coolant between the engine and radiator, maintaining optimal operating temperature for efficient combustion and engine protection. The assembly includes the thermostat, housing, seal/gasket, and temperature sensor – a complete ready-to-install unit. LR006071 fits 2008

Product Overview OE-grade front stabilizer bar link (anti-roll bar link / sway bar link) for for Land Rover vehicles. This critical suspension component connects the front anti-roll bar to the suspension, reducing body roll during cornering and improving vehicle stability. Fits the front left (LH) position. With age, the ball joints can develop play, causing knocking noises over bumps or when rocking the vehicle from side to side. Key Features Front left (LH) position –

Product Overview Genuine OE-grade heater manifold hose for for Land Rover and for Jaguar vehicles with 5.0L AJ133 V8 petrol engines (both naturally aspirated and supercharged). This critical cooling system component, also known as a heater pipe or coolant crossover pipe, connects the engine coolant circulation circuit to the heater core, directing high-temperature coolant to the cabin heating module. LR018273 has been superseded by LR109402 – the current replacement part. Key

Product Overview OE-grade front right lower control arm (wishbone) for the for Land Rover Discovery 3 (L319) with air suspension. This suspension arm connects the front wheel hub to the vehicle subframe, allowing the wheel to move up and down while maintaining proper alignment and handling. LR075993 is the current replacement, superseding multiple earlier part numbers. Key Features Complete assembly – includes ball joint (35mm) and bushings OE-grade quality – direct OEM

Product Overview Genuine OE-grade vapor canister (charcoal canister / evaporative emission canister) for for Jaguar vehicles. This component is part of the vehicle‘s Evaporative Emission Control (EVAP) system – it stores and absorbs fuel vapors from the fuel tank using activated charcoal, preventing them from escaping into the atmosphere. When the engine is running, the canister is purged and the stored vapors are drawn into the intake manifold for combustion-. C2D40532

Product Overview OE-grade rear oxygen sensor (lambda sensor) for for Land Rover Range Rover and Range Rover Sport. Monitors exhaust gases post-catalyst to optimize air-fuel ratio, ensuring efficient combustion and emissions control. Manufactured to original equipment specifications. LR136928 is the current replacement, superseding LR035748 and LR098290. Key Features OE-grade quality – direct OEM replacement Heated sensor design – reaches operating temperature quickly for

Product Overview OE-grade front air spring (air bag / air suspension bellow) for for Land Rover vehicles with air suspension-. This flexible rubber-and-fabric component replaces the traditional coil spring – inflated with compressed air to support vehicle weight and adjust ride height-. Direct-fit replacement for worn or leaking air springs – restores factory ride height, eliminates sag, and ensures proper suspension performance. Key Features OE-grade quality – manufactured

Product Overview The Rear Propeller Shaft LR023283 is an OE-grade drivetrain component engineered for the for Land Rover Freelander 2 (L359) . This rotating metal shaft transmits power from the transmission to the rear differential, driving the rear wheels in all-wheel-drive (AWD) configurations-. Manufactured to original equipment specifications, this complete assembly is pre-balanced and ready to install-. LR023283 supersedes LR007804 and LR021553– it is the current

Product Overview The Front Upper Control Arm LR014629 (superseded by LR063688) is a precision-engineered OE-grade suspension component designed for select Land Rover models. This critical steering and suspension link connects the front wheel hub to the vehicle chassis, controlling wheel movement and maintaining proper alignment. Manufactured to exacting OEM specifications, this control arm restores factory ride quality, steering precision, and suspension geometry. Supersessio

Product Overview The Coolant Separator (also referred to as Water Separator or Degas Coolant Separator) JDE38626 is an OE-grade replacement component designed for select Jaguar and Land Rover vehicles equipped with Ingenium 1.5L & 2.0L petrol engines-. This precision-engineered part plays a critical role in the vehicle’s cooling system by separating and routing coolant effectively to maintain optimal engine operating temperatures. Supersession Note: This part has been

Product Overview The C2D1536 front lower control arm (right-hand / straight lower wishbone) is a direct OEM-equivalent replacement for the for Jaguar XJ (X351) RWD models from 2010 to 2019. This cast aluminium suspension component connects the wheel hub to the subframe, maintaining precise wheel geometry and absorbing road forces. A worn or damaged arm causes poor alignment, uneven tyre wear, or unstable handling – replace to restore steering precision and ride safety. Key

Product Overview The XR858473 crankshaft pulley (also known as vibration damper pulley or harmonic balancer) is a direct OEM-equivalent replacement for the for Jaguar XF, XJ, and other models fitted with the 2.0L GTDI petrol engine. This specially designed pulley features an inbuilt vibration damper that absorbs engine combustion vibrations, protecting the crankshaft from excessive stress while driving accessory belts for the alternator, water pump, power steering pump, and A

Product Overview The LR011711 rear oxygen sensor (lambda sensor / heated exhaust gas oxygen sensor) is a direct OEM-equivalent replacement for the for Land Rover Range Rover L322 (2010–2012) fitted with the 5.0L V8 petrol engine – both naturally aspirated and supercharged variants. This sensor monitors oxygen levels in the exhaust stream after the catalytic converter, providing critical feedback to the Engine Control Unit (ECU) for precise air-fuel ratio adjustment. A failing

Product Overview The LR073366 front lower suspension arm bushing (rear bush / hydrobush) is a direct OEM-equivalent replacement for the for Land Rover Discovery 3 (L319) and Discovery 4 (L319) . This hydraulic rubber bushing is pressed into the rear eye of the front lower wishbone, dampening vibration and road shock while controlling suspension arm movement. Worn bushings cause knocking noises, poor handling, or uneven tyre wear – replace to restore ride comfort and

Product Overview The C2C20176 outer tie rod end (right‑hand / track rod end) is a direct OEM‑equivalent replacement for the for Jaguar S‑TYPE (X200), XJ (X350), and XK (X150) models. This critical steering component connects the steering rack to the right‑front wheel hub, translating steering input into precise wheel movement-7. Worn tie rod ends cause loose steering, uneven tyre wear, or clunking noises – replace to restore precise steering control and vehicle safety. Key

Product Overview The LR032114 left front drive shaft (CV axle assembly) is a direct OEM-equivalent replacement for the for Land Rover Freelander 2 (L359) . This complete axle assembly transmits torque and rotational power from the transmission to the front left wheel, enabling efficient acceleration while accommodating suspension movement and steering articulation-. A failing driveshaft causes clicking noises when turning, vibrations under acceleration, or driveline shudder–

Product Overview The C2D5410 headlight washer nozzle (left side) is a direct OEM-equivalent replacement for the for Jaguar XJ (X351) . This electrically operated telescopic nozzle extends from the bumper to spray washer fluid onto the headlight lenses, ensuring optimal visibility and maintaining the vehicle's safety systems-. A faulty nozzle fails to extend, leaks, or sprays improperly – replace it to restore full headlight cleaning function. Key Features Feature Benefit