Pouch Cell Lab Equipment

Automatic Z-shape Stacking Machine For Electrode Stacking Process Brief Introduction This product is used for Z-shape stacking of anode, cathode electrode and separator of pouch cell core. The mechanical arm auto picks up the material and stacking, auto identifies the single and double material sheets, auto pulls separator, correction and the constant tension control, separator auto cutting and ending wind, auto taping. Fully automatic operation, high stacking efficiency and

Pouch Cell Gas Driven Top and Side Hot Sealing Machine for Aluminum Laminated Film Case Brief Introduction The machine is used for pouch cell aluminum laminated case top & side edge sealing before electrolyte injection process. The sealing blade is made of copper, which ensures excellent heat conduction. The heating temperatures for both the upper and lower sealing blades can be independently regulated and controlled as needed. Key Features ● The device boasts unique safety

Pouch Cell Final Vacuum Sealer with Auto Piercing Function Brief Introduction STC-BEF-200 vacuum sealer is used for pouch cell final vacuum sealing after electrolyte injection and cell formation, it is with auto piercing function to de-gassing the cell and do a secondary sealing under vacuum condition. It is touch screen operation high automation. Key Features ● With piercing needle, piercing function can be completed automatically. ● Sealing blade is made from copper with

Transfer Roll to Roll Film Coating Machine for Battery Electrode Making Brief Introduction STC-TMZT-300 coating machine is a three roller transfer coating equipment, which can be used continuous coating and intermittent coating, it is convenient to apply for surface coating for various substrates. Especially used in the lithium-ion battery industry, the equipment is designed in accordance with the convenience of the researchers and meets the requirements of coating precision

Hot Flat Pressing Machine with Pressure Display​ Brief Introduction This product is suitable for hot flat pressing of cell after winding, which is convenient to enter the case. The winded cell is put on the lower die through pressurization and heating to make the cell shape, so as to achieve the thickness of the cell is consistent and decrease the elasticity of the cell. It also can reduce the short-circuit rate of assemble the cell and ensure the consistency of the finished

Pouch Cell Hot Flat Pressing Machine Brief Introduction STC-BRY-200 hot flat pressing machine is used for pouch cell cores hot flat pressing after stacking & winding to makes it easy to put into aluminium-laminated case and pouch cell formation. The heating pressing die size is L200 x W200mm. The upper and lower pressing plate temperature can be controlled independently and digital display by thermometer. Features ● Upper and lower pressing die temperature can be controlled

Pouch Cell Lab Equipment Electrode Stacking Machine With Split Type Brief Introduction STC-BDP-MA300 is the stacking machine, which is used for stacking pouch cell anode, cathode and separator by "Z' shape to make a pouch battery core. The stacking size is adjustable from L20~200mm to W20~200mm. Features ● Stacking size is adjustable. ● Counter is designed. ● Desktop design, compact size. ● Control part and working part split design, easy to operate. Technical Parameters

Manual Winding Machine for Pouch Cell and Cylindrical Cell Electrode Winding Brief Introduction STC-CJR-M30 is a compact desktop manual winding machine for winding pouch cell electrode & separator to make a battery cell core. With optional cylindrical cell winding die, it can be used for cylindrical cell winding. The compact body makes it be a ideal device for cylindrical cell research in lab. Features ● Winding speed is adjustable. ● Bracket is designed to ensure the winding

Vacuum Film Coating Machine with 300mm Stroke Adjustable ​ Brief Introduction The product is an advanced equipment designed for coatings various substrates. It is widely used in all kinds of material film coating, like ceramic films, crystal films, battery material film, and special nano films etc. The device boasts a high-precision control system that guarantees uniform and accurate coating, making it an indispensable tool for both research and battery manufacturing. Key

500ml Planetary Vacuum Mixing Machine for Slurry Preparation Brief Introduction STC-EXJ-500 is a compact planetary vacuum mixer with vacuum mixing and dispersion function. It is widely used for battery slurry mixing, powder and ceramic material mixing. Built-in vacuum pump is designed for maximum remove the gas bubble. 500ml mixing container is included, 250ml and 1000ml mixing container can be optional as extra mixing container. Key Features ● The mchine is standardly

100mm Heated Calender Machine for Battery Electrode Roll Press Brief Introduction STC-DRG-100 is a compact heated roll press machine, mainly used for battery electrode pressing, max temperature to 130℃ adjustable and digital display by thermostat. The pressing gap and pressing speed is adjustable. 100mm width roller as standard model, the other width roller can be optional upon request. Features ● High roller hardness HRC62, surface plated by chrome treatment. ● Vertical

Pouch Cell Gas Driven Case Forming Machine Brife Introduction STC-BCK-G65 is a gas driven machine for aluminum-laminated film pouch cell case forming. The case punching depth can be adjustable. The compact design makes it the perfect tool for research or sample making. Features ● Gas driven, electric is not required. ● Punching speed is adjustable. ● Punching pressure is adjustable. ● Different punching die can be optional and replaced, easy to replace optional die. ● The

Semi-automatic pouch cell electrode stacking machine with Z-shape layer-by-layer technology. Features adjustable stacking up to 150x150mm, 500 layers maximum, and 1KW power consumption. Ideal for battery pilot production and laboratory research with high efficiency stacking and precision positioning.

Professional STC-BRF-G200 aluminum laminated film heat sealer for laboratory battery research. Features independent temperature control (up to 300°C), copper sealing head, adjustable timer, and safety protection. 1000W power with 200mm blade length accommodates battery cases up to 200mm. Includes 1-year warranty and customization options.

Professional 50L vacuum drying chamber with 1450W power input and 133Pa vacuum degree for battery electrode manufacturing. Features PID temperature control, stainless steel construction, and optional customization. Ideal for laboratory drying, sterilization, and heat treatment applications with 1-year warranty.

Professional 800mm vacuum film coating machine for lithium battery electrode research. Features adjustable coating speed (0-200mm/s), heating up to 150°C, and touch screen operation. Ideal for ceramic films, crystal films, and pouch cell development with 1-year warranty and customization options.

Compact automatic film coating machine featuring 250mm coating length and 150°C top heating system. Ideal for ceramic films, crystal films, and lithium battery electrode coating research. Includes touch screen operation, built-in vacuum pump, and adjustable coating speed up to 200mm/s. Backed by 1-year warranty and lifetime technical support.

Professional battery electrode rolling press machine with digital micrometer control, 0-2mm adjustable thickness, and 0-10mm/s speed. Features φ100xW100mm rollers, AC110V/220V operation, and 1-year warranty. Ideal for battery research and development applications with customizable options available.

Professional laboratory hot crimping machine for polymer pouch battery R&D featuring 200mm sealing blade, 250℃ temperature control, and vacuum sealing capabilities. Modular design allows glove box or production line integration with copper sealing heads for efficient heat transfer. Includes 1-year warranty and customization options for various battery sizes.