Lithium Battery Raw Material

High Quality Lithium Battery Anode Electrode Material Metal Aluminum Foil Pole Piece Chip Sheet Product Description Lithium battery pole pieceLithium battery pole piece Lithium battery electrode is the key material for manufacturing batteries. The quality of the pole piece has a decisive factor on the capacitance. At the same time, the manufacturing process is high. We can customize the pole pieces of different sizes and thicknesses according to customer requirements. The

Conductive Carbon Coated Aluminum Foil For Battery Cathode Substrate Conductive carbon coated Aluminium foil can replace conventional Al foil as battery cathode substrate with improved properties Better electrical conductivity and less internal resistivity Better mechanical strength and toughness to avoid short circuit caused by dendrite growth Improved adhesion to the electrode material Provides larger discharging capability and longer service life for Li-Ion batteries

Product Description Lithium copper composite foil Lithium copper composite tape has been widely used in lithium-ion solid or semi-solid batteries. The surface of the lithium-copper composite belt produced by our company is flat, bright, free of oil spots or other debris, free of oxides and nitrides, free of wrinkles, holes, cracks, creases, crimps and other defects. We can customize according to your needs. Technical Parameter name Lithium copper composite tape (double-sided

3mm Width Nickel Tab as Negative Terminal for Polymer Li-ion Battery 40pcs/Box Material: Nickel 99.99% Length: 60mm Width: 3mm Thickness: 0.09mm in Nickel Tab 0.28mm in Nickel Tab with Adhesive Polymer Tape Adhesive Polymer Tape is attached on the tab for immediate hot sealing Application: Connect to anode current collector as polymer battery negative terminal Net Weight: 160mg/pcs Gross Weight: 19.01g (Tabs with Box) Max. Loading Current: 3A Suggested Sealing Method

NMC 532 Lithium Nickel Manganese Cobalt Oxide Battery Material Product Description LiNiMnCoO2 NCM NMC 532 Cathode Powder NMC powder is mainly used for Lithium ion battery cathode raw materials. We provide NMC111,NMC 622,NMC 532,NMC811 Technical Parameter Product Name: LiNiMnCoO2 Type: ZK-NCM-532 SPECIFICATIONS Item Unit Standard Value Chemical composition Co+Ni+Mn wt% 57.00-59.50 58.73 Li wt% 7.30-7.65 7.4 Fe wt% ≤0.0050 0.0020 Cu wt% ≤0.0050 0.0009 Ca wt% ≤0.0200 0.0017 Na

18650 Pre-Clamped Empty Cylinder Cell Case With Anti-Explosive Cap - 100 Pcs/Package Note: These empty cylindrical cells are pre-clamped with the cap only and WITHOUT Cathode and Anode, they can NOT be used or charged as regular cylindrical batteries. Specifications Cap Cap with Built-in PTC Thermistor for overcurrent protection Cut-off current is about 7A Dimensions (Dia x Height) Case: 18mm(OD) x 17.5mm(ID) x 67mm(H) Top Cap: 17.5mm(D) x 4.05mm(H) Top Insulator: 12.5mm(D) x

High Quality 18650 26650 32650 14500 21700 Cylindrical battery Cylinder Cell steel case shell With CID PTC Case and Caps Product Description 18650 Battery Case with Anti-Explosive Cap and Insulation O-ring,Used for 18650 battery research, producing, especially for Powerful 18650 battery making,100set/package included Cylinder cell case, Cap and up/down spacer. Technical Parameter 1 Model 18650 2 Specification 18.15mm(OD) x 17.6mm(ID) x 68.25mm(H) 3 Case 304ss stainless steel

8mm Width Nickel Tab With Adhesive Polymer Tap As Negative Terminal For Pouch Cell 8mm Nickel Tab with hot melt tape as Negative Terminal for Polymer Li-ion Battery -- 50pcs/Box Material: Nickel 99.99% Length: 60mm Width: 8mm Thickness: 0.09mm Package: 50 pcs per box Net Weight: 320mg/pcs Gross Weight: 20g (Tabs with Box) Max. Loading Current: 10A Suggested Sealing Method (parameter below may vary from case to case): Soft type heat-sealing blade (Blade with rubber) 180-200C