Liquid Filled Pressure Gauge

2 Inches 250 kg/cm2 Glycerine Filling Manometer 1/8" NPT Back Mount Liquid Filled Pressure Gauge Description Liquid-filled pressure gauges provide users with a number of advantages in certain measurement applications. They are ideally suited for uses on equipment where excessive vibration and pulsation are encountered, such as pumps, compressors, and machine tools. Applications For measuring locations with high dynamic pressure loads and vibrations For gaseous and liquid

1.5 Inches 100 psi Black Dial Manometer 1/8" NPT Axial Mount Black steel Liquid Filled Pressure Gauge DescriptionStandard liquid filled gauges are filled with 100% (99.7% min.) glycerine which starts to become sticky at +17 degrees C, as the temperature decreases the more slimy the glycerine becomes causing the pointer to move slowly to the correct position. At -5 degrees C the gauge would stop operating completely. Locations with an even temperature that doesn't fluctuate

1.5 Inches Dual Scale Glycerine Fillable Manometer 1/8" NPT Back Mount Liquid Filled Pressure Gauge DescriptionMost liquid-filled gauges use glycerin to damp the pulsations, though in more extreme environments, silicone or mineral oil may be used to withstand temperature extremes. This liquid also serves to protect the internal components of the gauge, preventing friction and wear by adding a layer of lubrication. This in turn reduces corrosion by serving as a barrier to

Description A gauge range of twice the working pressure is generally recommended for maximum accuracy, safety, and for extended gauge life. The operating pressure should always be limited to 75% of the gauge range. When pressure pulsations are encountered, the operating pressure should be limited to two thirds of the gauge range. Applications For measuring locations with high dynamic

1.5 Inches 10 kg/cm2 Glycerine Fillable Manometer 1/8" NPT Back Mount Liquid Filled Pressure Gauge Description Liquid-filled gauges are used to damp vibrations and pulsations and minimize their effect on the gauge dial pointer. They are used primarily in dynamic and rugged applications where sudden shocks or pressure spikes might occur. They help to ensure the gauge maintains accurate readings for its rated lifecycle. This longer lifecycle means longer-term cost savings, as

4 Inches 70 bar Silicone Oil Filling Manometer 3/8 PT Panel Mount Liquid Filled Pressure Gauge Description The type of liquid used to fill the gauge varies with the application. Although pure glycerin provides the best performance in most applications, each has its own requirements. For instance, if extreme temperature fluctuations are expected, use silicone oils. Guidelines to help ensure that a fluid is properly matched to an application are: GLYCERIN, 99.5% Pure = 35°F to

2.5 Inches 25 bar Silicone Oil Filling Manometer G 1/4 Back Connection Liquid Filled Pressure Gauge DescriptionAdvantages of liquid filled gaugesThe filling liquid dampens any pressure peaks, shocks and vibrations that occur and protects the mechanics of the pressure gauge. Thus, material fatigue and malfunction is counteracted.A further factor – decisive for the user – is to ensure the readability of the prevailing pressure. The filling liquid causes the pointer’s motion to

60mm 400 bar Silicone Oil Filled Manometer Brass Connection Liquid-filled Pressure Gauge Description Liquid filled pressure gauges are designed to function in adverse conditions where pulsating pressure or vibration exists. A shock resistant Stainless Steel case protect the gauges which features phosphor bronze bourdon tube movement and a white aluminum dial with large numbers for easy reading. Range 0-300 psi. Glycerin filled. Applications For measuring locations with high

100mm 1000 psi 7 MPa Vibration-proof Panel Mounting Manometer Silicone Oil Liquid Filled Pressure Gauge Description Wesen type M03.02.100.F features a 100mm size liquid-filled gauge with a stainless steel case. The glycerine case fill dampens and lubricates the gauge internals, extending the life of the gauge. The M03.02.100.F gauge is ideal for applications with high dynamic pressure pulsations and vibrations. Applications For measuring locations with high dynamic pressure

100mm 3500 psi Oil Manometer with Flange Panel Mount Liquid-filled Pressure Gauge Description The higher the liquid viscosity, the greater its dampening capacity. The reason for this is that dampening changes in proportion to the temperature-dependent viscosity of the filling liquid. The suitable degree of dampening depends on the operating requirements the gauge must meet, such as pointer response time, pressure extremes, vibration and changes in pressure. WESEN can

80mm 1000 KPa Manometer with Clamp Panel Mounting Glycerin Liquid Filled Pressure Gauge Description Wesen type M03.02.080.C gauges are specifically designed for the HVAC market as a contractor’s gauge. This gauge features a stainless steel case, brass wetted parts, and an adjustable pointer. Contractor’s gauges are designed for static applications and may not be well-suited to high vibration and pulsation applications. Applications For measuring locations with high dynamic

2.5 Inches 50 kg/cm2 Oil Manometer 1/4" NPT Nickled Brass Radial Mount Liquid Filled Pressure Gauge Description Liquid filled pressure gauges from Compressed Air Systems can provide you with consistently accurate readings – a necessity when both safety and efficiency are on the line. Also, because they are built to be durable, you can count on them to last long into the future. Applications For measuring locations with high dynamic pressure loads and vibrations For gaseous

Description The liquid-filled model M03 Bourdon tube pressure gauge is constructed with a case from stainless steel and wetted parts from copper alloy. Due to the liquid filling in the case, the pressure element and movement are well protected from vibrating. Therefore, these gauges are particularly suited to measuring points with high dynamic loads, such as fast load cycles or vibrations.

Description Liquid filled pressure gauges are designed to function in adverse conditions where pulsating pressure or vibration exists. A shock resistant Stainless Steel case protect the gauges which features phosphor bronze bourdon tube movement and a white aluminum dial with large numbers for easy reading. Range 0-300 psi. Glycerin filled. Applications For measuring locations with high

Description To vent a WESEN gauge, move the valve to the open position which will release any pressure or vacuum built up in the case. If the gauge is installed in an upright position, the lever can be left in the open position. The lever allows the use of a gauge in a non-upright orientation. Applications For measuring locations with high dynamic pressure loads and vibrations

Description Wesen type M03 gauges are specifically designed for fire sprinkler service. This gauge features a black polycarbonate case, polycarbonate window and brass wetted parts. They are UL and FM approved for fire sprinkler service and have a standard accu- racy of ± 3/2/3% of span. Applications For measuring locations with high dynamic pressure loads and

DescriptionWesen standard pressure gauges are designed for long and reliable service under rugged conditions. Some typical applications are for pumps, hydraulic and pneumatic systems, compressors, as a contractor’s gauge and for many other applications where the measured media does not corrode brass. ApplicationsFor measuring locations with high dynamic

Description Wesen liquid-filled gauge with a stainless steel case. The glycerine case fill dampens and lubricates the gauge internals, extending the life of the gauge. The pressure gauge is ideal for applications with high dynamic pressure pulsations and vibrations. Applications For measuring locations with high dynamic pressure loads and vibrations For gaseous and

Description Our Industrial Case Pressure Gauge forms part of our carefully selected range of gauges and accessories; a dry fillable multi-purpose gauge, ideally suited for general use across all industrial applications. Features a Stainless Steel case, crimped bezel with plastic window and Brass / Bronze wetted parts. Configurable as either Bottom or Back Entry connection.

3 Inches 200 psi Stainless Steel Case Brass Wetted Parts 1/2" NPT Lower Mount Liquid Filled Pressure Gauge Description Not only does the liquid inside of these gauges help control the effects of vibrations, but the liquid also acts as a lubricant for the moving parts of the gauge. All of those factors plus stainless-steel with reinforced thermo plastic construction makes this one of the most durable gauges for purchase. Applications For measuring locations with high dynamic