Drilling Rig Spare Parts

Power Transmission SWZ Type Universal Cardan Shaft Coupling FOR Drilling Rig Spare Parts​ The SWC universal joint coupling is a structure without bolts. The bearing is fixed without bolts. It avoids the weak links damaged by bolt shearing, prolongs the service life and is convenient for maintenance. It is suitable for rolling machinery, lifting and transportation machinery and other heavy machinery. It connects two transmission shafts with different axes, the rotation

Hydraulic Motor Cycloid Reducer Drilling Rig Spare Parts Cycloidal Pinwheel Reducer Cycloidal Pinwheel Reducer description of Drilling Rig Spare Parts Cycloidal pinwheel reducer is a novel transmission mechanism using planetary transmission principle and cycloidal pinwheel. This reducer can be widely used in the reduction and transposition of various mechanical transmissions, such as the drive and reduction of transposition in the fields of textile, printing and dyeing, light

Drilling Rig Air Cartridge Air Compressor Spare Parts Air Filter Element Air Filter Element Description: Air filter material of air filter element is made of wood pulp filter paper of American HV company and South Korean Ahlstrom company to filter out dust, sand, water, oil mist and other impurities suspended in the ambient air. Air filter element applicable to Atlas screw air compressorThrough the diffusion of the filter and inertia collision agglomeration mechanism, oil

Air O Grip Unions For Drilling Rig Spare Parts Seal Inflatable O Seal Grip Union 4"-14' Seal-O-Grip unions are air-inflatable connectors for low pressure fluid or mud suction and return lines. The Seal-O-Grip carbon steel body welds in place on mud tanks or manifold pipe. A leak-tight seal is achieved with rig-supplied compressed air, even if the connecting pipe is not perfectly aligned. The oil and abrasion-resistant NBR pneumatic tube can be inflated up to 200 psi against

Drilling Rig Parts Stainless Steel Mesh Hydraulic Oil Suction Filter Oil Filter Element Description: Hydraulic oil filter filters out solid particle contaminants in the oil, so that the pollution degree of the oil is controlled within the limits of the critical hydraulic components, ensuring system purification, improving system reliability and extending equipment service life. Oil Filter Element Features of Drilling Rig Spare Parts High oil flow rate Low flow resistance High

Pneumatic Clutch /Air Clutch And Brake Friction Plate For Drilling Rig LT1120x300 LT Series of Friction Plate description: The raw material is very crucial to the brake shoe function. We strictly follow the industry standard on the requirement to raw material and other details, which insures our products of consistent good performance. The ventilation structure allows cooling air to pass through, quickly removing the heat generated by the friction plates, and the Torque is

Drilling Rig Spare Parts High Pressure FMC SPM Crossover Sub With FIG 1502 Hammer Union Crossover Sub description of Drilling Rig Spare Parts High Pressure Figure 1502 Integral Laterals are manufactured from hot forged alloy steel with special chemical properties, and are carefully heat-treated to enhance tensile strength and low temperature impacts. For incorporation into ground or truck mounted manifolds, the Kemper large bore 45° forged alloy steel Lateral is precision

Lever Operated Valve Drilling Rig Spare Parts H-2-X Controlair Valve H-2-X Controlair Valve description of Drilling Rig Spare Parts The H-2 handle control valve is a two-way pressure regulator operated by the handle lever. The original lever is in the closed position and the joystick moves clockwise (i. e., increased throttle direction).Increasing the handle angle, the output pressure gradually increases to the rated maximum output pressure. When the handle lever remains in

P55557-3 Air Cylinder Drilling Rig Spare Parts 8 Position Type Pneumatic Cylinder 8 Position Pneumatic Cylinder description of Drilling Rig Spare Parts The eight-bit shift cylinder is the main shift drive component for the large workover or other heavy equipment operation and walking, and the compressed air source of the piston and all levels of stop rings are achieved through the operation of the eight-bit shift valve. In a circuit system composed of the cylinder and the

Air Pressure Regulating Valve Drilling Rig Spare Parts H-3 Pneumatic Control Valve H-3 Pneumatic Control Valve description of Drilling Rig Spare Parts H-3 controlair Valve is equipped with a roller for operation by a cam or a similar mechanical device. Graduated pressure is obtained from the valve’s OUT line. Total movement is approximately 5/16" (8mm) with the initial 1/16" (1.6 mm) travel used to close its exhaust valve. Approximate weight: 4½ lbs. (2.0 Kg) H-3 controlair

Pneumatic Safety Valve Drilling Rig Spare Parts PQ-L10-40 Safety Valve PQ Safety Valve description of Drilling Rig Spare Parts Features: In a pneumatic transmission system, a safety valve is a valve used to prevent damage to pneumatic devices, equipment and pipelines and limit the maximum pressure of the circuit. When the air pressure exceeds the maximum limit pressure, the safety valve automatically opens to exhaust, and when the air pressure is lower than the maximum limit

Aluminium Alloy Drilling Rig Spare Parts TJQ-L15 Pressure Regulating Valve Pressure Regulating Valve description of Drilling Rig Spare Parts TJQ-L15 pressure regulating valve is a new type of pneumatic control regulator designed in recent years. This valve is suitable for remote control and pneumatic actuators in various pneumatic control systems where the starting balance is required to reach the rated value. The gas flow rate at the working port The valve casing is made of

K23JD Drilling Rig Spare Parts Two-Position Three-Way Electronically Controlled Directional Valve Electronically Controlled Directional Valve description of Drilling Rig Spare Parts 1. Features: Two-position three-way electronically controlled globe valve is a kind of end-sealed globe directional valve, which has two structural forms: "normally closed" and "normally open". This series of valves has low air purification requirements, strong dust resistance, and has many

FP-L6 Anti-Collision Over-Ring ValveAnti-Bumping Self-Returning Control Valve Drilling Rig Spare Parts FP-L6 Anti-Collision Over-Ring Valve FP-L6 Anti-Collision Over-Ring Valve description of Drilling Rig Spare Parts 1. Features: This valve is a two-position two-way handle control valve, which is equivalent to a gas circuit switch. The handle can automatically return to the neutral position. It is mainly used for oilfield workover rigs. We also supply pneumatic components of

Tube, Sael-O-Matic Union Kemper PN P680t 6" 3207137 Seal-O-Grip unions are air-inflatable connectors for low pressure fluid or mud suction and return lines. The Seal-O-Grip carbon steel body welds in place on mud tanks or manifold pipe. A leak-tight seal is achieved with rig-supplied compressed air, even if the connecting pipe is not perfectly aligned. The oil and abrasion-resistant NBR pneumatic tube can be inflated up to 200 psi against the outside diameter of the

API 11B Polished Rod Coupling Drilling Rig Spare Parts SM Sucker Rod Coupling Sucker Rod Coupling description of Drilling Rig Spare Parts Sucker rod coupling have the same box thread size in each end are used for connecting sucker rod and/or pony rod, and/or sinker bars with sucker rod threads. The polished rod coupling have the same box thread size in each end are used for connecting polished rod and/or sinker bars with polished rod threads to the sucker rod string. The sub

API 8A / 8C Drilling Rig Spare Parts Rotary Drilling SL70 Swivel The description of Drilling Rig Spare Parts Rotary Drilling Swivel Swivels Type SL are necessary hoisting tools for hanging drill pipes and jointing hoses in well repairing. They are designed and manufactured according to API Spec 8A/8C Specification for drilling and production. Swivel Features of Drilling Rig Spare Parts * With standard bails and double pin alloy steel sub. * The wash pipe and the packing

Air O Grip Union Drilling Rig Spare Parts Drilling Fluid Pipelines Pneumatic Tyre Union Air O grip Union description of Drilling Rig Spare Parts Air Grip Union is widely applied in drilling fiuid pipelines, with features of low-pressure, large pipesize, big pipe misalignment, frequent installation and uninstall. Especially, in connecting mud tanks, mud suction and return lines in solid control system. 150 psi maximum line pressure, 4, 6, 8, 10, 12, 14and 16- inch sizes

Upper And Lower Kelly Cock Valve Drilling Rig Spare Parts Drill Pipe Safety Valve Kelly Cock Valve description of Drilling Rig Spare Parts Kelly valve also named Kelly cock or drill pipe safety valve. It is a hand control valve in drill string circulating system and it is one of the effective tools to prevent blowout. Kelly valve is divided into Upper Kelly Valve and Lower Kelly Valve. Upper Kelly Valve is connected between swivel sub and Kelly. Lower Kelly valve is connected

12A-2 Transmission Roller Chains Drilling Rig Spares Double Stand Roller Chain Oilfield Drilling Rig Spare Parts Transmission chains The products are made of high quality alloy steel production. The plates are punched and squeezed bores by precision technology. The pin, bush, roller are machined by high-efficiency automatic equipment and automatic grinding equipment, then through heat treatment of carburization, carbon and nitrogen protection mesh belt furnace, surface