Concrete PP Fiber

Polyester yarn FDY Specification SD Raw white Trilobal Bright Round Bright 40D/24F 40D/24F 200D/96F 45D/24F 40D/36F 250D/96F 50D/24F 45D/36F 300D/96F 55D/24F 50D/36F 350D/96F 68D/24F 60D/36F 500D/192F 75D/36F 75D/36F 630D/192F 75D/72F 100D/36F 850D/192 75D/144F 200D/84F 1000D/192F 100D/36F 300D/96F 100D/48F 400D/96F 150D/96F 500D/192F 150D/144F 600/192F 300D/192F 450D/216F Product photo: Packing photo:

Polypropylene Fibre Twisted Bundle Form Introduction: Briture PP fiber is using polyolefin as its raw material, produced the rough surface treatment by special parallel thread extruding&twisting process. It has high break strength , better dispersion and strong combining ability, will be widely used to instead of steel fiber to reinforce the cement concrete and crack-resistant . Application: 1. concrete reinforcement 2. Industrial Floor Specification: Raw Material PP/PE Fiber

Polypropylene fiber monofilament form FUNCTION: Resist to shrink & crack Increase seepage resistance Increase friction resistance Increase freezing & thawing resistance Improve tendons protection Replace steel net (using in plastering) Prevent mortar split and crackle expansion Increase impact resistance and peeling resistance SPECIFICATION: Raw material 100% virgin PP Crack elongation 15-20% Fiber type monofilament Fiber dia 20-30microns Melting Point(℃) 160 Density(g/cm3) 0

Polypropylene Fiber Wave Form for shotcrete Properties: PP fibre Wave form can be instead of steel fibre in cement concrete for anti-crack. Easy to disperse and construct. Usage: 1. Suggestion of Additive rate: 5.4kg fibre in one cubic meter concrete. (not less than 2.7kg/M3) 2. Technic of mixture: Put the fibre into detritus first, then put grit to mix for about 2minutes, to make the fibre be dispersed. Then put cement and water to mix as per normal technic. Specification:

Synthetic Macro fiber Product Description Briture Synthetic Macrofiber is made of Polypropylene. Polypropylene macro fiber (PP macrofiber)for concrete is one of pp fiber used for reinforcing concrete products and mainly used for structural fibers. These fibers are wrapped in bundles of water-soluble film and packed in cartons. When used, just put the whole boxes of the fibers into concrete. The cartons and film are dissolved in water and the fibers are evenly dispersed in the

PP Fiber Twisted Bunchy form Product Description Polypropylene Fiber (PP Fiber) is made from 100% virgin PP granular, after extruding from different mould and technology, we can get 4 different types of fiber, including Monofilament form, Fibrillated Mesh form, Twisted Bunchy and Wave form with different size. These fiber can improve the reinforcement of mortar or concrete performance effectively to make them strong and protect the projects. 1. This fibre is used to instead

PP Fiber Twisted Bunchy form Product Description Polypropylene Fiber (PP Fiber) is made from 100% virgin PP granular, after extruding from different mould and technology, we can get 4 different types of fiber, including Monofilament form, Fibrillated Mesh form, Twisted Bunchy and Wave form with different size. These fiber can improve the reinforcement of mortar or concrete performance effectively to make them strong and protect the projects. 1. This fibre is used to instead

UHPC Special Synthetic Fibre Product Description UHPC fibers are unique in their ability to create a fully-engaged molecular bond with mortar and concrete that is 300% greater than other fibers. UHPC fiber products are 40 denier, monofilament PVA fibers for use in fiber reinforced concrete, stucco, shotcrete and precast. UHPC Fiber is specifically designed for use in concrete products for the purpose of controlling plastic shrinkage, thermal cracking and improving abrasion

UHPC Special Synthetic Fibre Product Description UHPC special synthetic fiber uses hydrophilic modification technology for its surface treatment. UHPC fiber products are 40 denier, monofilament PVA fibers for use in fiber reinforced concrete, stucco, shotcrete and precast. UHPC Fiber is specifically designed for use in concrete products for the purpose of controlling plastic shrinkage, thermal cracking and improving abrasion resistance. It has excellent dispersibility in UHPC

Concrete twisted bunchy pp fiber Product Description: Polypropylene Fiber (PP Fiber) is made from 100% virgin PP granular, after extruding from different mould and technology, we can get 4 different types of fiber, including Monofilament form, Fibrillated Mesh form, Twisted Bunchy and Wave form with different size. These fiber can improve the reinforcement of mortar or concrete performance effectively to make them strong and protect the projects. Introduction: 1. This fiber

Polypropylene Fiber Wave Form for shotcrete Properties: PP fibre Wave form can be instead of steel fibre in cement concrete for anti-crack. Easy to disperse and construct. Usage: 1. Suggestion of Additive rate: 5.4kg fibre in one cubic meter concrete. (not less than 2.7kg/M3) 2. Technic of mixture: Put the fibre into detritus first, then put grit to mix for about 2minutes, to make the fibre be dispersed. Then put cement and water to mix as per normal technic. Specification:

105℃ Polyethylene Explosion Proof Fiber Product Description This product is mixed with other refractories evenly, and then baked. With the baking temperature rising and reaching a certain temperature, the fibers begin to soften, shrink, melt, and finally form pore and carbonize. They distribute in the construction body to form micro-network pore, which can open water-air passage, reduce internal pressure and prevent bursting. With various advantages, BT105 Explosion proof

30microns diameter low melting point PE Fiber as Explosion Proof Fiber Product Description: This product is mixed with other refractories evenly, and then baked. With the baking temperature rising and reaching a certain temperature, the fibers begin to soften, shrink, melt, and finally form pore and carbonize. They distribute in the construction body to form micro-network pore, which can open water-air passage, reduce internal pressure and prevent bursting. Specification

Polypropylene Fiber Wave Form for shotcrete Properties: PP fibre Wave form can be instead of steel fibre in cement concrete for anti-crack. Easy to disperse and construct. Usage: 1. Suggestion of Additive rate: 5.4kg fibre in one cubic meter concrete. (not less than 2.7kg/M3) 2. Technic of mixture: Put the fibre into detritus first, then put grit to mix for about 2minutes, to make the fibre be dispersed. Then put cement and water to mix as per normal technic. Specification:

Synthetic Macro fiber Product Description Briture Synthetic Macrofiber is made of Polypropylene. Polypropylene macro fiber (PP macrofiber)for concrete is one of pp fiber used for reinforcing concrete products and mainly used for structural fibers. Provide good impact,fatigue,shrinkage control and ductility in all grade concretes.Cost saving,Is easier to use,to disperse and safe to handle.Can be used in highly corrosive circumstance.The surface has been embossed,which greatly

Synthetic Macro fiber Product Description Briture Synthetic Macrofiber is made of Polypropylene. Polypropylene macro fiber (PP macrofiber)for concrete is one of pp fiber used for reinforcing concrete products and mainly used for structural fibers. These fibers are wrapped in bundles of water-soluble film and packed in cartons. When used, just put the whole boxes of the fibers into concrete. The cartons and film are dissolved in water and the fibers are evenly dispersed in the

UHPC Special Synthetic Fibre Product Description UHPC special synthetic fiber uses hydrophilic modification technology for its surface treatment. It has excellent dispersibility in UHPC, and has good bonding performance with cement matrix materials, which can effectively reduce and inhibit UHPC plastic shrinkage, drying shrinkage, Micro-cracks caused by temperature changes and other factors significantly improve crack resistance, toughening , impact resistance, fire and

Polypropylene fiber monofilament form FUNCTION: Resist to shrink & crack Increase seepage resistance Increase friction resistance Increase freezing & thawing resistance Improve tendons protection Replace steel net (using in plastering) Prevent mortar split and crackle expansion Increase impact resistance and peeling resistance SPECIFICATION: Raw material 100% virgin PP Crack elongation 15-20% Fiber type monofilament Fiber dia 20-30microns Melting Point(℃) 160 Density(g/cm3) 0

Polypropylene fiber monofilament form FUNCTION: Resist to shrink & crack Increase seepage resistance Increase friction resistance Increase freezing & thawing resistance Improve tendons protection Replace steel net (using in plastering) Prevent mortar split and crackle expansion Increase impact resistance and peeling resistance SPECIFICATION: Raw material 100% virgin PP Crack elongation 15-20% Fiber type monofilament Fiber dia 20-30microns Melting Point(℃) 160 Density(g/cm3) 0

Polypropylene fiber monofilament form FUNCTION: Resist to shrink & crack Increase seepage resistance Increase friction resistance Increase freezing & thawing resistance Improve tendons protection Replace steel net (using in plastering) Prevent mortar split and crackle expansion Increase impact resistance and peeling resistance SPECIFICATION: Raw material 100% virgin PP Crack elongation 15-20% Fiber type monofilament Fiber dia 20-30microns Melting Point(℃) 160 Density(g/cm3) 0