Concrete PP Fiber

Cellulose Fiber for concrete reinforcement DESCRIPTION cellulose fiber Is a kind of high strength and hydrophilic fiber, extracted from special plant.It can form a better bonding in the concrete and cement . Because of the short fiber filament diameter , so it accupy a huge volume in unit volume, improve the crack resistance of concrete. It is very easy to disperse in concrete, and the dispersed fibers will not agglomerate again. The addition of reinforced cellulose fiber has

Wood Cellulose fiber For concrete reinforcement Product Description Cellulose Fiber Cellulose fiber is a kind of short fiber with high strength and fine denier. It is extracted from special plants and has natural hydrophilicity. It has a good affinity with cement and other hydrates in concrete and can form a better bond with concrete. Because the fiber is very short and has the characteristic of small diameter of single filament, the distribution quantity in unit volume is

UL Temperature Index 250℃ Polyetheretherketone (PEEK) Fiber For dry canvas for Paper Making Machinery In Civil Fields Properties: PEEK specialty fiber is produced by high temperature melt spinning of PEEK resin. 1. Creep resistance: especially high temperature creep resistance, equivalent nylon normal temperature endurance at 150℃, 2. High flame retardancy: can meet 94V-1 of 0.3mm thick, can meet 94V-0 of 1.5mm thick, 3. Only produce H2O and CO2 when fully burned, does not

Polyetheretherketone (PEEK) Fiber For Composite Materials For Structural Components Required For Weaponry Properties: PEEK specialty fiber is produced by high temperature melt spinning of PEEK resin. 1. UL temperature index 250℃. 2. Purity resin up to 94MPa, fiber enhanced up to 210MPa. 3. Except sulfuric acid, almost insoluble in any regular chemical reagents. 4. Resistant to 109 rad, equivalent nuclear reactor radiation intensity. 5. Especially high temperature creep

Wholly Aromatic Fiber Polyetheretherketone (PEEK) Fiber For Aerospace And Composite Materials Properties: PEEK specialty fiber is produced by high temperature melt spinning of PEEK resin. 1. High temperature resistance: UL temperature index 250℃. 2. High strength: Purity resin up to 94MPa, fiber enhanced up to 210MPa. 3. Chemical resistance: except sulfuric acid, almost insoluble in any regular chemical reagents. 4. Irradiation resistant: resistant to 109 rad, equivalent

UHPC Special Synthetic Fibre Product Description UHPC fibers are unique in their ability to create a fully-engaged molecular bond with mortar and concrete that is 300% greater than other fibers. UHPC fiber products are 40 denier, monofilament PVA fibers for use in fiber reinforced concrete, stucco, shotcrete and precast. UHPC Fiber is specifically designed for use in concrete products for the purpose of controlling plastic shrinkage, thermal cracking and improving abrasion

48mm 54mm PP Macrofiber For Precast, Shotcrete Concreting Polypropylene Fibre Wave Form Product Description PP fibre Undee form can be instead of steel fibre in cement concrete for anti-crack. Easy to disperse and construct. Proposed Dosage Suggestion of Additive rate: 5.4kg fibre in one cubic meter concrete. (not less than 2.7kg/M3) Typical Application Shotcrete, concrete engineering, such as foundations, roads, Bridges, DAMS, especially in the deformation and toughness of

48mm 54mm PP Macrofiber For Precast, Shotcrete Concreting Synthetic Macro fiber Product Description PP fibre Undee form can be instead of steel fibre in cement concrete for anti-crack. Easy to disperse and construct. Features 1. Improve the supporting performance and bonding performance of concrete to produce effective secondary strengthening effect; Provide high residual strength of concrete and improve the durability of concrete; 2. Coarse fiber is most suitable for

PP Fiber Twisted Bunchy form PP Fiber Hybrid Type Twisted Bunchy And Mesh Combined For Reinforcement APPLYING INSTRUCTION: 1. Ration design of the fibre concrete: Generally the recommended amount to add to the concrete is more than 2.7kg per sqm (volume ratio is 0.3%), reinforcement adding amount is 5.5kg, Compared with adding 47kg of steel fibre, 5.4kg polymer fibre has the same volume ratio to the concrete. 2. Length: 54mm for common crack-resistant requirement. 3. Matching

AR Glass Fiber Choppe Stran-36mm For Reinforcement Concrete Specification: Material AR-Glassfiber Zro2(%) ≥16.7 Filament 13±2μm Liner weight of strand (TEX) 76+/-10 Specific gravity (g/cm³) 2.7 Length (mm) 36 Fire resistance Inorganic material Moisture cotent(%) 0.2max Size content(%) 1.8 Soft temperature(ºC) 860 Stiffness 120min Tensile strength(GN/m2) 1.65 Elastic modulus(GN/m2) 75 Breaking strength (N/Tex) 0.42 Noted: FIBER MIN 16. 7%,far over than the EU BSEN Packing:

AR Glass Fiber Choppe Stran-36mm For Reinforcement Concrete Specification: Material AR-Glassfiber Zro2(%) ≥16.7 Filament 17±1μm Liner weight of strand (TEX) 500 Specific gravity (g/cm³) 2.68 Length (mm) 36 Fire resistance Inorganic material Moisture cotent(%) 0.2max Size content(%) 2.5 Soft temperature(ºC) 860 Stiffness 120min Tensile strength(GN/m2) 1.70 Elastic modulus(GN/m2) 80 Lubricant content % 0.3-0.5 Noted: FIBER MIN 16. 7%,far over than the EU BSEN Packing: 10kg net

PP fiber mesh form for concrete reinforcement Product Description Polypropylene Fiber (PP Fiber) is made from 100% virgin PP granular, after extruding from different mould and technology, we can get 4 different types of fiber, including Monofilament form, Fibrillated Mesh form, Twisted Bunchy and Wave form with different size. These fiber can improve the reinforcement of mortar or concrete performance effectively to make them strong and protect the projects. Specification Raw

6mm HD Glass Fiber For Anti-Cracking and Reinforcement Concrete Specification: Material AR-GLASSFIBRE Zro2(%) ≥16.5 Filament 11±1μm Liner weight of strand (TEX) 50±10 Specific gravity (g/cm³) 2.68 Length (mm) 6 Colour white Moisture cotent(%) 6% Size content(%) 0.6-0.7 Soft temperature(ºC) 860 Fire resistance Incombustilble Inorganic material NOTE: Our ARGfiber reached to the EUBsen 15422:2008 and USA ASTMC 1666 standard. Packing: 18kg net each bag;54bags net each pallet

UHPC Special Synthetic Fibre Description UHPC special synthetic fiber uses hydrophilic modification technology for its surface treatment. It has excellent dispersibility in UHPC, and has good bonding performance with cement matrix materials, which can effectively reduce and inhibit UHPC plastic shrinkage, drying shrinkage, Micro-cracks caused by temperature changes and other factors significantly improve crack resistance, toughening, impact resistance, fire and explosion

Polyvinyl Alcohol PVA Fiber synthetic Fibres for UHPC Product Description UHPC special synthetic fiber uses hydrophilic modification technology for its surface treatment. It has excellent dispersibility in UHPC, and has good bonding performance with cement matrix materials, which can effectively reduce and inhibit UHPC plastic shrinkage, drying shrinkage, Micro-cracks caused by temperature changes and other factors significantly improve crack resistance, toughening , impact

UHPC Special Synthetic Fibre Product Description UHPC fibers are unique in their ability to create a fully-engaged molecular bond with mortar and concrete that is 300% greater than other fibers. UHPC fiber products are 40 denier, monofilament PVA fibers for use in fiber reinforced concrete, stucco, shotcrete and precast. UHPC Fiber is specifically designed for use in concrete products for the purpose of controlling plastic shrinkage, thermal cracking and improving abrasion

PP fiber wave form Products Description Product name PP Fiber Wave Form Diameter 0.9+/-0.1 mm Length 30-60mm Tensile Strength > 400Mpa Crack Elongation > 15% Melting Point 160-170 Elastic Modulus > 5000Mpa Acid & Alkali Resistance Strong Introduction PP fibre Wave form can be instead of steel fibre in cement concrete for anti- crack. Easy to disperse and construct. USAGE: 1 . Suggestion of Additive rate: 5 . 4 kg fibre in one cubic meter concrete. (not less than 2 . 7kg/M3) 2

White Powder B-VMCH Coat For Medical Packaging Aluminium Foils Coatings In Heat Melt Description: Solution vinyl resin provides good adhesion to vinyl, metals, concrete and cellulosic substrates. This resin gives highly flexible, post-formable coatings on metal coil and sheet. Typical application used in a wide variety of clear and pigmented coatings on paper, film, foil and fabric. Useful in the production of heat sealable packaging coatings and adhesive. Application: 1. It

White Powder B-VMCH As Primer And Inks For Golden And Silver Card Papers Description: Solution vinyl resin provides good adhesion to vinyl, metals, concrete and cellulosic substrates. This resin gives highly flexible, post-formable coatings on metal coil and sheet. Typical application used in a wide variety of clear and pigmented coatings on paper, film, foil and fabric. Useful in the production of heat sealable packaging coatings and adhesive. Application: 1. It is used as

Nylon Fiber For Controlling Plastic Shrinkage And Thermal Cracking Character: It has high tensile strength, low liner density and good thermal stability. The surface has good adhesion to concrete. At the same time, it can effectively reduce the formation of plastic shrinkage cracking of concrete. Specification: Diameter μm 15-25 Tensile strength N >150 Elastic modulas Gpa >3500 Melting point ºC >210 Elongation at break % 19-24 Elongation at standard load % 10.5-13.5 Variation