Walk In Test Chamber

Programmable Walk In Test Chamber Multipane Viewing Window With Heater​ Optional accessories: 1. Cable Port: Two size of cable port is available: &50mm, &100mm. 2. Double door 3. Pass room: Provided to avoid disturbance of atmospheric temperature and humidity while opening the door. 4. Floor reinforcement: Can be fixed if heavy specimen placed in the chamber for test. 5. Carry-in inclined platform: Provided below the door to facilitate moving of specimens in and out through

Galvanized Steel Sheet Exterior Walk In Test Chamber Multipane Viewing Window With Heater​ Related Testing Standard: GB/Bb T2423.2-89 high temperature test method GB2423.1-89 test A: low temperature test method 6 Ab IEC60068-2-1 low temperature test method GJB150.4-1986 test at low temperature EIA - 364-59 test at low temperature IEC60068-2-38 temperature cycle IEC60068-2-78 constant humidity temperature MIL - STD – 202G – 103B humidity test IEC60068-2-30 humidity temperature

Programmable Walk In Test Chamber Stainess Steel Interio / Galvanized Steel Sheet Exterior​ Walk In Environmental Chamber These walk-in chambers have an assembled structure and can be installed and debugged on site. The cavity has a large volume and can be used to simulate single or complex environmental factors in the atmosphere, such as temperature, humidity, salt spray, light, dust, rain, and vibration. Thermal cyclic chamber chamber with internal air circulation, and all

Customized Rapid Change Environmental Reliability Climate Test Walk-in Room Electrical panel: all power connectors, protection devices power control logic built in the control panel integrated to the chamber all electrical cables tagged with id number all electrical function circuit equipped with its own safety device that shuts down the relevant circuit or the entire test chamber if a faulty develops all electrical systems comply with recognized technical regulation as well

OEM Walk In Test Chamber Stainess Steel Interio / Galvanized Steel Sheet Exterior​ Main feature of the Walk-in environmental temperature humidity stability chamber 1. Programmable Controller with RS232C, 7″ LCD touch panel control 2. Stainess steel Interior, galvanized steel sheet exterior 3. 2pcs stainless steel loading shelves free 4. Multipane viewing window with heater 5. 60mm diameter feed-through port 6. Floor stand with castors Uses: This product is used to provide

Walk-in constant temperature and humidity laboratory control system: 1; Imported programmable touch type LCD Chinese dialogue display, microcomputer integrated controller 2; Temperature and humidity display control instrument (Japan) imported large screen (5.7 inch LED display), the screen is simple to operate, easy to edit the program, without key input, screen direct touch options. Accuracy: 0.1℃ (display

Equipment Overview: This walk-in test chamber simulates the temperature and humidity changeable environment for the products or materials. It is widely used in the adaptability test of electrical, electronics, instrument and meter and other product parts under high and low temperature and humid environment during storage, transportation and usage, to determine the temperature adaptability of the above

Equipment structure: Outer box material: high quality carbon steel plate. Phosphating electrostatic spray treatment Inner box material: SUS304 stainless steel high quality light plate Insulation material: polyurethane hard foaming The door seal is made of double silicone rubber sealing material. The observation window is made of multi-layer toughened insulating glass with conductive film. In order to prevent glass

Heating humidifying:The heater adopts porcelain frame nickel chromium wire electric heater, which has little thermal inertia and long life.By the instrument output controllable pulse duty cycle PID signal, through solid state relay to control, the control is stable and reliable.Refrigeration system:Compressor: imported semi-closed German valley wheel;The United States "Ai Gao" dryer filter, Taiwan

Enter type characteristics: 1, walk-in laboratory test case base using 8 # channel steel welding net type structure, the bearing capacity is strong, can avoid the bottom concave and convex and cracking phenomenon, 2, large double open the door and small slope design convenient bulk products and cart in and out of the laboratory, equipped with large view window and multiple sets of indoor LED explosion-proof lamps,

Features of Simulation Climate Control Drive Cold Room Climatic Test Environmental Humidity Walk In Chamber: 1. Graceful appearance, circularly shaped body, surface treated with mist strips and plane. Easy to operate, safe and reliable. 2. Rectangular double-paned viewing window for observation of sample under test,with interior lights 3. Water supply system that is externally connectable, convenient for refilling

Walk-in laboratory performance and characteristics: 1, with a very wide temperature and humidity control range, can meet the needs of users. The unique balanced temperature and humidity control method can obtain a safe and accurate temperature and humidity environment. With stable and balanced heating and humidification performance, high precision, high stability of temperature and humidity control. 2, equipped

Characters: 1. Use special machine structure which can meet temperature and humidity well distribution. 2. Use environment-friendly refrigerant which meets international standard. 3. LCD display screen uses dialog box operating easy and user-friendly. 4. When fault occurs, display failure causes to help troubleshooting. 5. Have safety protection equipment and power failure memory. 6. Connect with computer,

Features: • This series product use polyurethane panel,the inner surface is made of stainless steel,the surface of the shell is made of color steel.It has firm structure and easy installing,with a elegant appearance and novel design. • We adopt import fittings as our main control fittings to ensure oven quality. Use the newest cooling conrol model in the international , it can adjusted the cooling power of the