SMT PCB Conveyor

SMT PCB Lift down gate conveyor Main Function: This unit is used as a liking function when in a long SMT line.When operator need to pass through the production line,press the button,the rail will goes down and folding to make room for 500mm length space.Press button again after pass through,the rail back to position and continue to work. When the machine fully extending, the whole machine length is 1300mm. The rail length of folding section is:580+700mm. Main Specification:

SMT PCB 1.0m Linking Conveyor with lamp Main Function: Used in SMT line as liking,inspection function,3 sensors. In manual mode can stop one PCB for inspection,PCB transfer to exit place after press reset button. Transfer to downstream after received signal. In auto mode,PCB transfer to exit directly,and wait for signal to send out. Main Specification: 1.Machine size:(L)1000x(W)750x(H)1800mm 2.PCB size: custom pcb design,50*50～460*350mm.Width can be adjusted by handwheel. 3

SMT PCB 0.6M Reject Conveyor Can Store 5 Pcbs Main Function: Located after AOI to separate the OK/NG PCBs.Single rail a stage. Can store 5PCBs,when received the fifth NG board, sound alarm with green light to inform to recheck, OK board can flow to the next equipment. When received the sixth NG board, ★sound alarm with red light and stop working to waiting to take out the 5pcs NG board, press reset button and return to work. Can be stored 5 PCBs in the reject area Main

SMT PCB 0.5M conveyor with cover Main Function: Use in SMT line as linking, buffer, inspection function. 2 sensors works. In manual mode, exit position can stop 1pcs PCB waiting for inspection,after inspection, press RESET button, PCB will transport to downstream after received signal. In Auto mode, PCB transfer to exit position waiting for downstream signal. Wtih a set of cover on the rail. Main Specification: Machine size (L)500x(W)750x(H)1100mm PCB size 50*50～480*460mm

SMT PCB 0.5m Linking Conveyor with cooling fans Main Function: Use in SMT line as linking, buffer, inspection function. 3 sensors works. In manual mode, exit position can stop 1pcs PCB waiting for inspection,after inspection, press RESET button, PCB will transport to downstream after received signal. In Auto mode, PCB transfer to exit position waiting for downstream signal. Install one set cooling fan with 8pcs in 120*120mm on the rail. Main Specification: Machine size (L

250 PCB Cleaner Main Function: Clean the dust and eliminate the static on the surface of PCB. 1. Function *Remove dust particles remaining on the surface of PCB board. *Eliminate PCB static electricity. 2. Specification Model: QX-250W Support customer customization 1.Cleaning speed: 4~30s(can be adjustable ) 2.PCB size: (L)100*(W)70～(L)330*(W)250mm 3.Number of electrostatic eliminators : 2 Pcs 4.Cleaning roller:Upper cleaning roller 2 Pcs 5.Cleaning modes: Built in Cleaning