Allen Bradley PLC Parts

1746-IM16 The 1746-IM16 SLC 500 Digital AC Input Module by Allen-Bradley is an input (AC) module with sixteen 200-240V AC inputs and is fitted into any available SLC 500 I/O chassis using an RTB (Removable Terminal Block). It has 16 points per common and an input operating voltage of 170-265V AC at 47-63Hz. It has a backplane current rating of 0.085A at 5V DC and an electrical signal delay of 35ms for ON and 45ms for OFF state around its input points. It has an OFF-state

1746-A10 The 1746-A10 is an Allen-Bradley manufactured chassis used with the SLC 500 Modular Programmable Logic Controllers (PLC) platform. This hardware hosts the electronic circuitry and interconnection slots to distribute the backplane power to the attached modules. It can accommodate up to Ten (10) SLC 500 modules excluding the Power Supply. The Power Supply has a separate attachment slot located at the leftmost part of the hardware. Only SLC 500 Power supplies may only

1715-OB8DE Allen-Bradley 8 Point Digital Output Module 1715-OB8DE NEW FACTORY SEALED Manufactured by Allen-Bradley, the 1715-OB8DE is a redundant I/O module that is classified under the 1715 series of Allen-Bradley redundant I/O modules. The 1795-OB8DE features a power dissipation of 3 Watts of maximum power capacity. The operating temperature for the 1715-OB8DE is a minimum of -25 degrees Celsius and a maximum of 70 degrees Celsius. The redundant l/O module is described as

1746SC-INO4VI The 1746sc-INO4VI is a 4-channel isolated analog output with selectable voltage and currents. It is manufactured by spectrum controls and it is to be used with the 1746 processors. The 1746sc-INO4VI is an I/O module. The module has a backplane current requirement of 120 mA at 5 Volts DC and 250 mA at 24 Volts DC when connected without an external power supply. When connecting the module, the users need to select the source of the power supply. This switch is

1747-L524 The Allen-Bradley 1747-L524 is an SLC 500 processor. Also referred to as an SLC 5/02 controller, this processor has a maximum memory of 4K for instructions and a maximum of 4096 modules each for discrete input and output. This processor supports analog, digital, scanner module, specialty and intelligent IO modules. However, this processor is not compatible with the 1746-BLM and 1746-MPM modules. Supported scanner modules by this processor are DeviceNet, ControlNet,

1756-CN2R The Allen-Bradley 1756-CN2R is a ControlLogix communication module that is part of the Logix controller platform. This module is primarily used for establishing connectivity in redundant ControlNet network topology as it features Two (2) BNC ControlNet ports. This module occupies a single sot of the cassis and may be installed to any available slot of standard chassis such as 1756-A4, 1756-A7, 1756-A10, 1756-A13, 1756-A17 and used with standard ControlLogix power

1756-OF8H The Allen-Bradley 1756-OF8H is an analog output module from the ControlLogix controller platform. This module mainly features Eight (8) voltage or current output channels, configurable for 0-20 mA and 4-20 mA current output signals and +/-10VDC voltage output signals. The 1756-OF8H has a module resolution of 15-16bits on all signal ranges. It comes with internal Digital to Analog converter (DAC) using R-Ladder DAC, monotonicity with no missing codes conversion

1756-OF4 The Allen-Bradley 1756-OF4 module is a ControlLogix non-isolated output module. It has 4 voltage or current outputs available with a current resolution of 15 bits across 21 mA, 650 nA/bit for a voltage resolution of 16 bits across 10.5V, 320 µV/bit. It requires a 20 pin RTB, or Removable Terminal Block housing for connection to field devices. The compatible RTBs are the 1756-TBSH and the 1756-TBNH. It is important to ensure that the chassis and power supply have

1756-PA75 The 1756-PA75 is an Allen-Bradley Standard power supply. This module is installed on the dedicated power supply slot, located at the left most side any ControlLogix chassis. The primary purpose of this power supply is to deliver the necessary backplane power, used by each of the modules installed to the chassis. This backplane power energizes the modules to enter operational state.The 1756-PA75 must be supplied with an external power to operate. It is compatible

1766-L32AWA The Allen-Bradley 1766-L32AWA is a part of the MicroLogix 1400 Programmable Logic Controller series. The 1766-L32AWA controller requires 120-240V AC input power and has battery-backed RAM. It supports 32 digital I/O points with Twenty (20) digital 120V AC inputs and 12 Relay outputs. It can be expanded by connecting with up to seven 1762 expansion I/O modules. The 1766-L32AWA measures 3.5 x 7.08 x 3.43 in. and weighs 2 lbs. For communication, it has an isolated RS

1768-L43S The Allen-Bradley 1768-L43S compact GuardLogix controller is a powerful controller module. It provides unmatched scalability and flexibility across applications. This module has a standard memory of 2 MB and a 0.5 MB safety memory. The power dissipation of this module is 4 to 7.5 W. The operating temperature of this module is 0 to 60 degrees Celsius and the storage temperature of the 1768-L43S is -4 to 85 degrees Celsius. It has a relative humidity of 5 to 95% non

1756SC-IF8U The 1756sc-IF8U is an eight channel universal input module. This module is manufactured by Spectrum Controls and is ideal for voltage, current, resistance, RTDs, and Thermocouple input types. It comes with up to eight channels of voltage that supports the above. The 1756sc-IF8U also features a 1000-Volt DC channel-to-backplane isolation that features 1000-Volt DC Channel-to-Chassis ground Isolation. The module also comes with 12.5-Volt DC Channel-to-channel

1757-SRM The 1757-SRM is an Allen-Bradley ProcessLogix and ControlLogix module that is used for implementing controller redundancy to increase a process system availability. This is done by employing a secondary controller synchronized with a primary controller installed on Two (2) different ControlLogix chassis. When implementing a redundant controller system, Two (2) identical ControlLogix chassis must be installed. The chassis size, the modules installed and positioning,

1756-RMC1 The Allen-Bradley 1756-RMC1 is a fiber-optic communication cable required for connecting ControlLogix redundancy modules. It has a length of one meter or 3.28 feet. It is part of the series of Bulletin 1756-RMCx Cable Series that come in a variety of lengths. These are compatible with both standard and extreme-environment modules. Building a ControlLogix Redundant Controller System requires one or two of these cables. Because redundancy modules and chassis do not

1766-L32BWA Allen-Bradley 1766-L32BWA MicroLogix 1400 32 Point Controller AB 1766-L32BWA The 1766-L32BWA is a discontinued Programmable Logic Controller (PLC) that is manufactured by Allen Bradley. This controller belongs to the MicroLogix 1400 product family. It is especially compatible for use in machine level automation or small processes. This controller has embedded Twelve (12) Fast 24V DC Inputs, Eight (8) standard 24VDC inputs and Twelve (12) Relay outputs. The High

1756-RMC10 Newest AB New Factory Sealed 1756-RMC1 CA SHIP 1756RMC1 1756RMC1 In Stock The Allen-Bradley 1756-RMC10 is part of the series of Bulletin 1756-RMCx cables that come in various lengths. This fiber-optic communication cable is needed for connecting ControlLogix redundancy modules in chassis pairs. It is an essential component in building a ControlLogix Redundant Programmable Controller System. The 1756-RMC10 is sold separately from other system components and can be

1756-IG16 Allen-Bradley 1756-IG16 is a Transistor-Transistor Logic (TTL) Input Module. It has 16 inputs with 8 points in a group and is a ControlLogix standard digital input module that allows user configuration of a Change of State and Input Filter Times through the RSLogix 5000 software. To connect the 1756-IG16 to a ControlLogix 1756 chassis, you need to use a removable terminal block housing or RTB. You can use either the 1756-TBNH or the 1756-TBSH RTB. When using this

1734-OB8S Safety Digital Output Module Features • Solid-state outputs • Dual-channel mode provides redundant control by using two output signals (channels), which allows use of the module for safety Category 3and 4, and applications that are rated up to and including PerformanceLevel e/SIL CL3 when both channels' Point Mode configurations are setto Safety Pulse Test .• Single-channel mode provides control by using one output signal (channel), which allows use of the module

1769-L30ER The ControlNet network is an open, control network for real-time, high-throughput applications. The ControlNet network uses the Common Industrial Protocol (CIP) to combine the functionality of an I/O network and a peer-to-peer network providing high-speed performance for both functions. The ControlNet network gives you deterministic, repeatable transfers of all mission-critical control data in addition to supporting transfers of non-time-critical data. I/O updates

1769-L30ER The 1747-ASB module is an SLC 500 single-slot, RIO communicationlink module. It occupies the first slot (slot 0) of a 1746 remote chassis,where the SLC processor normally resides. The 1747-ASB module is an adapter, or slave, on the RIO link, and themaster of the remote chassis and remote expansion chassis it isinstalled in. Remote expansion chassis are optional. It acts as agateway between the scanner and the I/O modules residing in theremote chassis and remote