Flash Memory IC Chip

High-performance 512K OTP EPROM with 45ns fast access and low power CMOS operation. Ideal for microprocessor systems. Features 5V supply, JEDEC packages, and high reliability with ESD protection. Suitable for commercial and industrial applications.

High-speed 128Mb DDR SDRAM with 333Mbps data rate and 2.5V operation. Features bidirectional DQS, DLL alignment, and four internal banks. Ideal for industrial and embedded systems requiring reliable memory performance.

64Kbit I2C serial EEPROM with 1.8V operation, 1mA active current, and 200-year data retention. Features 32-byte page write, hardware write protect, and cascadable up to 8 devices. Ideal for low-power industrial and automotive applications.

Original 256K (32K x 8) OTP EPROM with 45ns fast access and low-power CMOS operation. Features 5V supply, JEDEC packages, and Rapid Programming Algorithm. Ideal for reliable firmware storage in industrial systems.

High-speed 18-Mbit pipelined SRAM with NoBL architecture for zero wait-state operations. Supports 167MHz bus speed, 3.3V supply, and 3.4ns clock-to-output. Ideal for industrial applications requiring fast back-to-back read/write. Available in lead-free 100 TQFP package.

High-density 1024Kbit I2C serial EEPROM with low-power CMOS technology, 1MHz clock support, and 128-byte page write buffer. Ideal for data acquisition and personal communications. Available in 8-pin PDIP, SOIC, and SOIJ packages.

The AT29C040A is a 5V-only 4Mb Flash memory with 90ns access and 256-byte sector programming. Features low power dissipation, 10,000-cycle endurance, and hardware/software data protection. Ideal for in-system reprogramming. Available in DIP package.

High-performance 256K (32K x 8) CMOS static RAM with 55ns speed and 4.5V-5.5V operation. Features low active power (275mW), automatic power-down, and TTL-compatible I/O. Ideal for industrial and automotive applications with wide temperature range support.

High-performance 256K EEPROM with 150ns access time, 64-byte page write, and low power dissipation. Features hardware and software data protection, 10-year data retention, and industrial temperature range. Ideal for reliable nonvolatile storage in embedded systems.

Industry-standard MICROWIRE bus EEPROM with 1 million erase/write cycles and 40-year data retention. Features block protection, self-timed programming, and page write mode. Ideal for industrial applications requiring reliable non-volatile memory.

64Kbit nonvolatile F-RAM with 10 trillion read/write endurance and NoDelay writes. Operates at 3.0-3.6V with up to 1MHz I2C interface. Qualified to AEC Q100 for -40°C to +125°C automotive use. Drop-in replacement for serial EEPROM.

128 Mbit multilevel serial flash memory with SPI interface, 50MHz clock, and 256-byte page program. Supports sector and bulk erase, over 10K program/erase cycles, 20-year data retention. RoHS compliant ECOPACK package. Ideal for embedded systems and circuit boards.

The DS1213C SmartSocket integrates a lithium energy cell and CMOS controller to protect SRAM data for over 10 years. Accepts standard 32K x 8 CMOS RAMs. Features gas-tight contacts, automatic write protection, and saves PCB space. Operating temp: 0°C to 70°C.

High-speed 128Mb SDRAM with 2Mx16 configuration, 3.3V supply, and industrial temp range (-40°C to +85°C). Features PC133 compliance, auto precharge, and self refresh. Ideal for embedded systems requiring reliable, low-power memory.

High-performance 128M-bit serial flash IC with SPI interface, 50MHz fast access, and low power consumption. Features 100K erase/program cycles, 10-year data retention, and advanced security. Ideal for embedded systems and industrial applications.

High-speed 256Mb SDRAM with 32Mx8 configuration, PC133 compliant. Features programmable burst lengths, auto precharge, and self refresh. Supports 3.3V LVTTL interface. Ideal for industrial and commercial memory systems requiring reliable synchronous operation.

The Xicor X24C44SI is a serial 256-bit NOVRAM with 16x16 static RAM and nonvolatile E2PROM array. Features unlimited RAM writes, 1,000,000 store cycles, and 100-year data retention. Ideal for single-chip microcomputers with minimum I/O interface. Available in 8-lead SOIC package.

High-reliability 512Kbit I2C serial EEPROM with 64-byte page write buffer, low-power CMOS technology, and 1 million erase/write cycles. Supports 100/400kHz clock, hardware write protect, and operates from 1.7V to 5.5V. Ideal for industrial and automotive applications. Pb-free and RoHS compliant.

The EPCS16SI8N is a 16Mbit serial configuration flash memory for Altera FPGAs. Features low power, 100K erase/program cycles, and AS interface. Supports in-system programming via USB Blaster. Ideal for Arria, Cyclone, and Stratix series.

High-reliability 2K serial EEPROM with 3-wire interface, 2 MHz clock rate, and self-timed write cycle. Supports 2.7V to 5.5V operation, 1M write cycles endurance, and 100-year data retention. Ideal for industrial and automotive applications. Available in multiple package options including SOIC-8.