Flash Memory IC Chip

The TLV5606 is a 10-bit voltage output DAC with flexible 4-wire serial interface, operating from 2.7V to 5.5V. Features programmable settling time, rail-to-rail output buffer, and Class AB output stage. Available in SOIC and MSOP packages with industrial temperature range -40°C to 85°C.

Precision voltage-to-frequency converter with 0.01% max linearity and ±50 ppm/°C stability. Operates on single 5V supply, low 15 mW power consumption. Ideal for ADC, tachometers, and remote sensing. Through-hole PDIP-8 package.

Precision 16-bit ADC with differential inputs, onboard 2.048V reference, and I2C interface. Features programmable gain up to 8 and low power consumption. Ideal for portable instrumentation and industrial control.

Precision 16-bit ADC with continuous self-calibration, low noise of 4μVp-p, and programmable gain up to 8. Features I2C interface, 8 to 128 SPS data rate, and ultra-low 90μA consumption. Ideal for portable instrumentation and industrial process control.

LDC1314RGHR is a 4-channel 12-bit inductance-to-digital converter for inductive sensing. Features minimal configuration, remote sensor support up to 20 cm, wide 1 kHz to 10 MHz frequency range, and low power consumption. Ideal for consumer and industrial applications.

Low power 16-bit DAC with internal +10V reference and configurable ±10V, ±5V, or +10V output. Features 5μs settling time, double-buffered parallel interface, and data readback. Ideal for process control and ATE applications.

16-bit 8-channel ADC with serial interface, 100kHz conversion rate, and 84dB SINAD. Supports single-ended or differential input. Ideal for battery-powered systems, data acquisition, and industrial process control. Available in QSOP-20 and SSOP-20 packages.

High-speed 16-bit analog-to-digital converter with 100kHz sampling rate and ultra-low power consumption down to 1.8mW. Operates from 2.7V to 5.25V. Features SPI/SSI serial interface, differential input, and power-down mode. Ideal for battery-operated systems, remote data acquisition, and industrial controls. Available in compact 8-pin VSSOP package.

Qualified for automotive applications. 10-bit resolution with 1MSPS sample rate and zero latency. Wide analog supply 2.7V to 5.25V. Ultra-low power dissipation of 14.5mW. Features 8 single-ended channels, programmable alarms, and GPIOs. Ideal for PLC, medical, and battery-powered systems.

Low-power 8-bit ADC with I2C interface, 2.7V-5.5V supply, and automatic power-down mode. Features 188.9 ksps throughput, ±0.2 LSB INL/DNL, and out-of-range alert. Ideal for portable instruments, medical devices, and system monitoring. Industrial temp range -40°C to +105°C.

Low-power 12-bit analog-to-digital converter with 2 input channels and 50-200ksps sample rate. Features variable power management, 2.7V-5.25V supply, and serial interface compatible with SPI. Ideal for portable systems and remote data acquisition.

Ultra-low-noise 24-bit ADC with 4th-order delta-sigma modulator and programmable gain from 1 to 64. Supports up to 30kSPS data rate, SPI interface, and onboard calibration. Ideal for high-resolution industrial measurement applications.

Precision 24-bit delta-sigma ADC with low-noise PGA, internal 2.048V reference, and dual IDACs. Supports 8 differential inputs, data rates up to 2 kSPS, and single-cycle settling. Ideal for RTD, thermocouple, and pressure sensor applications. RoHS compliant.

Precision 20-bit ADC with onboard low-noise PGA, internal oscillator, and 10/80 SPS data rates. Ideal for weigh scales, strain gauges, and pressure sensors. Supports ±39mV or ±19.5mV input. Available in TSSOP-16 package, -40°C to +85°C.

Precision 12-bit ADC with internal MUX, PGA, voltage reference, and oscillator. Supports 128 SPS to 3.3 kSPS data rates, single-cycle settling, and I2C interface. Ideal for portable instrumentation, battery monitoring, and industrial control. Operating range: -40°C to +125°C.

Low power 10-bit analog-to-digital converter with 8 input channels and 50-200 kSPS sampling rate. Features SPI/QSPI/MICROWIRE interface, independent analog/digital supplies, and extended industrial temp range -40°C to +105°C. Ideal for automotive, medical, and portable systems.

Complete 12-bit ADC with integrated SHA, 100 kSPS sampling rate, and industry-standard pinout. Supports 0-10V, 0-20V unipolar and ±5V, ±10V bipolar ranges. Ideal for signal processing and DC measurement. Available in multiple temperature grades.

Texas Instruments SN74LVTH16245ADGGR 16-bit noninverting bus transceiver with 3.3V operation and 5V tolerant I/O. Features bus-hold, hot insertion support, and low ground bounce. Ideal for mixed-voltage systems and PCB optimization.

This 8-bit noninverting bus transceiver supports dual configurable power rails from 1.65V to 5.5V for universal voltage translation. Features ESD protection exceeding 4000V HBM, latch-up performance over 100mA, and VCC isolation. Ideal for personal electronics, industrial, enterprise, and telecom applications.

Dual positive-edge triggered D-type flip-flop with preset and clear. Operates from 1.65V to 3.6V, inputs accept up to 5.5V. Maximum propagation delay of 5.2ns at 3.3V. ESD and latch-up protection. Ideal for servers, telecom, and industrial automation.