Amplifier IC Chips

Class-B dual output stereo amplifier delivering 2x6W. Requires few external components, features mute/standby switch, thermal protection, and reverse polarity safe. Ideal for multimedia applications. Available in HDIP18 or SIL9MPF package.

Low-cost quad op-amp with true differential inputs, operating from 3V to 32V single supply. Features short-circuit protection, ESD ruggedness, and industry-standard pinouts. Ideal for industrial and automotive applications. Available in stock with custom packaging options.

Low-cost quad op-amp with true differential inputs, operating from 3V to 32V. Features short-circuit protection, low input bias current, and industry-standard pinouts. Ideal for single-supply applications. Available in stock with various package options.

High-performance dual OTA IC in DIP-8 package. Ideal for audio processing, voltage-controlled amplifiers, and filters. Offers wide supply range and low distortion. Suitable for industrial and consumer electronics applications.

The TDA7297 is a dual bridge amplifier IC delivering 15+15W output. Designed for TV and portable radio applications, it features wide supply voltage range (6V-18V), minimal external components, stand-by/mute functions, and short circuit and thermal overload protection.

High-precision dual op-amp with ultra-low offset voltage (60 µV max), low input bias current (2 nA), and low noise (8 nV/√Hz). Ideal for instrumentation, sensor signal conditioning, and wireless base station control circuits. Operates from 2.5V to 15V, unity gain stable, and available in MSOP-8 package. Fully specified from -40°C to +125°C.

Quadruple operational amplifier IC with wide 3V to 32V single supply range. Features 2-kV ESD protection, low 0.8mA supply current, and ground-sensing input. Ideal for transducer and DC amplification in single-supply systems. Available with custom options.

Ultralow distortion dual op amp with 850MHz bandwidth and 2800V/µs slew rate. Features low noise (4.4nV/√Hz) and low power (5mA). Ideal for instrumentation, active filters, and ADC drivers. Available in 16-lead LFCSP. Operating temp -40°C to +125°C.

High-precision monolithic sample-and-hold circuit with BI-FET technology. Features 0.002% gain accuracy, 6µs acquisition time, and low droop rate. Operates from ±5V to ±18V supplies. TTL/CMOS compatible logic input. Ideal for industrial and aerospace applications.

The AD822ARZ is a dual low power FET-input op amp with true single-supply operation from 3V to 36V. Features rail-to-rail output, 1.8MHz bandwidth, 800μV max offset, and 25pA bias current. Ideal for battery-powered instrumentation, active filters, and data acquisition systems. Available in SOIC-8 package.

The AD622ANZ is a low cost instrumentation amplifier offering superior linearity and common-mode rejection. Requires only one external resistor for gain 2 to 1000. Features 125 μV max offset, 1.5 mA supply current, and 800 kHz bandwidth. Ideal for transducer interfaces and industrial controls.

The LM6134BIM is a quad low power operational amplifier offering 10 MHz gain-bandwidth with only 360 µA per amp supply current. Features rail-to-rail input/output, wide supply range from 2.7V to 24V, and high CMRR of 100 dB. Ideal for battery-powered instrumentation and portable applications.

The TDA7266SA is a 7W+7W dual bridge amplifier IC with wide 3.5-18V supply range. Features minimal external components, stand-by/mute functions, short circuit and thermal overload protection. Ideal for LCD monitors, TVs, and portable radios. Pin compatible with TDA7266S and TDA7297.

The TLC271CDR is a programmable low-power operational amplifier featuring wide supply voltage range (3V to 16V), low noise (25 nV/√Hz), and high input impedance (10^12 Ω). Ideal for battery-powered and precision applications with bias-select mode for optimized power and performance.

The TL084IDR is a low power JFET-input op amp with high slew rate (13 V/µs), wide common-mode range, and output short-circuit protection. Ideal for precision industrial applications, it offers low input bias current and latch-up-free operation. Available in multiple temperature ranges.

The AD8042ARZ is a low power, high speed voltage feedback amplifier with 160 MHz bandwidth and 200 V/μs slew rate. It operates on +3 V to ±5 V supplies, features rail-to-rail output, and drives 50 mA. Ideal for video, ADC drivers, and portable equipment.

The LF347M is a low cost, high speed quad JFET input op amp with internally trimmed offset voltage (5 mV max). Features low input bias current (50 pA), wide bandwidth (4 MHz), high slew rate (13 V/µs), and low supply current (7.2 mA). Ideal for high speed integrators, D/A converters, and sample-and-hold circuits.

The NJM4558D is a high-performance dual operational amplifier IC in a compact 8-pin DIP package. It offers low noise, high gain bandwidth, and excellent stability, ideal for audio and signal processing. Suitable for various electronic applications, with reliable performance and long-term availability.

OPA2344UA is a low power rail-to-rail CMOS op amp with 1MHz bandwidth and 150µA quiescent current. Ideal for data acquisition, audio processing, and portable devices. Available in SOT23-5, MSOP-8, and TSSOP-14 packages. RoHS compliant.

Low-power dual op amp with 1 MHz gain bandwidth, rail-to-rail I/O, and 100 µA quiescent current. Operates from 1.8V to 5.5V. Ideal for battery-powered systems, portable equipment, and analog filters. Industrial temp range -40°C to +125°C.