Electric Power Fittings

Foundation Anchor Plate Wind Turbine Anchor Plate for foundation has 2 parts: upper and lower anchor plate(embed and template ring), which are connected by splice plates and high strength anchor bolts. Splice plate is a kind of rectangle plate which has the same mechanical properties of anchor plate, usually wind turbine foundation requires anchor plate with large diameter, compared with manufacture anchor ring plate in hot rolled method, use splice plate and seperate parts

Wind Turbine Anchor Plate Foundation Anchor Plate Wind Turbine Anchor Plate for foundation has 2 parts: upper and lower anchor plate(embed and template ring), which are connected by splice plates and high strength anchor bolts. Splice plate is a kind of rectangle plate which has the same mechanical properties of anchor plate, usually wind turbine foundation requires anchor plate with large diameter, compared with manufacture anchor ring plate in hot rolled method, use splice

Wind Power Threaded Steel Rod Wind Turbine Anchor Bolts Wind Generators High Strength Steel Anchor Rod Model Number: M16 to M56 Grade: 8.8/10.9 Steel Material: 42CrMo Application: Wind Power Generation Diameter: M16 to M56 length: 2M TO 12M Description: Wind turbine anchor bolt raw material is 42CrMoA and other equivalent materials. It is purchased from large and qualified steel mills. Each steel round bar went through ultrasonic flaw detection before delivery. According to

Vertical M36 M39 M42 M45 M48 M56 M64 Steel Anchor Threaded Rods Wind Generators High Strength Steel Anchor Rod Model Number: M16 to M56 Grade: 8.8/10.9 Steel Material: 42CrMo Application: Wind Power Generation Diameter: M16 to M56 length: 2M TO 12M Description: Wind turbine anchor bolt raw material is 42CrMoA and other equivalent materials. It is purchased from large and qualified steel mills. Each steel round bar went through ultrasonic flaw detection before delivery.

Windmill Turbine Steel Rod With Threaded Ends Threaded Tension Rod In Concrete Anchoring Bolts ISO Wind Generators High Strength Steel Anchor Rod Model Number: M16 to M56 Grade: 8.8/10.9 Steel Material: 42CrMo Application: Wind Power Generation Diameter: M16 to M56 length: 2M TO 12M Description: Wind turbine anchor bolt raw material is 42CrMoA and other equivalent materials. It is purchased from large and qualified steel mills. Each steel round bar went through ultrasonic

Wind Turbine Generator Foundation Steel Threaded Rod M36 M39 M42 M45 M48 Anchor Bolts Ring Plate Upper Ring And Lower Ri Wind Generators High Strength Steel Anchor Rod Model Number: M16 to M56 Grade: 8.8/10.9 Steel Material: 42CrMo Application: Wind Power Generation Diameter: M16 to M56 length: 2M TO 12M Description: Wind turbine anchor bolt raw material is 42CrMoA and other equivalent materials. It is purchased from large and qualified steel mills. Each steel round bar went

Vertical M36 M39 M42 M45 M48 M56 M64 Steel Anchor Threaded Rods And Studs Bolt Anchor Wind Generators High Strength Steel Anchor Rod Model Number: M16 to M56 Grade: 8.8/10.9 Steel Material: 42CrMo Application: Wind Power Generation Diameter: M16 to M56 length: 2M TO 12M Description: Wind turbine anchor bolt raw material is 42CrMoA and other equivalent materials. It is purchased from large and qualified steel mills. Each steel round bar went through ultrasonic flaw detection

GR.8.8 10.9 M36 M48 M64 Of Wind Tower Threaded Bar Bolt Fastener Anchor Rod Wind Generators High Strength Steel Anchor Rod Model Number: M16 to M56 Grade: 8.8/10.9 Steel Material: 42CrMo Application: Wind Power Generation Diameter: M16 to M56 length: 2M TO 12M Description: Wind turbine anchor bolt raw material is 42CrMoA and other equivalent materials. It is purchased from large and qualified steel mills. Each steel round bar went through ultrasonic flaw detection before

Suspension Type Insulator High Voltage Pin Type Porcelain Insulator Ceramics Insulator Pin Porcelain Insulator Model Number: OEM Material: Porcelain, ceramics Insulator type:pin insulator Application: High Voltage Usage: Insulation Protection Color: White and brown Certification: ISO9001/CE/ROHS Sample: Sample Available Specifications: High Voltage Pin Insulator Type/BS Class P-11-Y P-15-Y P-20-Y P-33-Y Main Dimensions (mm) H 133 137 195 244 h 48 48 52.63 52.63 D 140 152 230

U160BL Porcelain Insulator Ceramic Insulators For Sale Ceramic Insulators On Power Lines Disc Type Suspension Type Insulator High Voltage Disc Type Porcelain Insulator Ceramics Insulator Description: Disc insulators are also called suspension insulators. They are actually a piece of ceramic or glass with steel caps and iron feet at the upper and lower ends, which can be used in series. Suspended insulators are generally made of insulating parts (such as porcelain and glass)

Glass Disc String Strain Suspension Tension Insulator Suspension Type Insulator Suspension Type Insulator Toughened Glass 70kN 100kN 160 kN Suspension Insulator Aerodynamic Type Model Number: OEM Material: glass Insulator type:Aerodynamic glass insulator Application: High Voltage Usage: Insulation Protection Color: glass Certification: ISO9001/IEC Sample: Sample Available Description: The use of glass insulators can cancel the regular preventive test of the insulators during

Overhead Line Fittings Ball Eyes is used for connecting the overhead line fitting strings with the insulator ball socket end, and supporting other fittings to form one insulator fitting string, and connecting the wire to the poles or towers. Socket Clevis Eyes is used for connecting the overhead line fitting strings with the insulator ball end end, and supporting other fittings to form one insulator fitting string, and connecting the wire to the poles or towers. • The product

Optical Cable Fixed Overhead Lines Optical Cable Optical Fiber Protection OPGW Pre-Twisted Tension Clamp OPGW Cable Fittings Composition: structural reinforcement bar, outer stranded wire, overhanging component, connecting fittings (U-shaped hanging ring, ZH-shaped right-angled hanging ring), structural fasteners, etc. Uses: To support, suspend the optical fiber composite overhead ground wire on a linear pole tower or a pole tower with a rotation angle ≤25°. Features: 1. The

Overhead Line Fittings The suspension clamp is designed for the installation and suspension of cables or conductors on the towers or poles. • The clamp body and keepers are malleable iron,cotter-pins are stainless steel.the other parts are steel, all ferrous parts are hot-dip galvanized. • The clamp can be easily installed without damage to the cables or conductors; • Standard: IEC 61284-1997 Technical data sheet Catalog No. mm) (mm) Dimensions (kN) Rated Failure Load kg)

Overhead Line Fittings The suspension clamp is designed for the installation and suspension of cables or conductors on the towers or poles. • The clamp body and keepers are malleable iron,cotter-pins are stainless steel.the other parts are steel, all ferrous parts are hot-dip galvanized. • The clamp can be easily installed without damage to the cables or conductors; • Standard: IEC 61284-1997 Technical data sheet Catalog No. mm) (mm) Dimensions (kN) Rated Failure Load kg)

Overhead Line Fittings The suspension clamp is designed for the installation and suspension of cables or conductors on the towers or poles. • The clamp body and keepers are malleable iron,cotter-pins are stainless steel.the other parts are steel, all ferrous parts are hot-dip galvanized. • The clamp can be easily installed without damage to the cables or conductors; • Standard: IEC 61284-1997 Technical data sheet Catalog No. mm) (mm) Dimensions (kN) Rated Failure Load kg)

Overhead Line Fittings The suspension clamp is designed for the installation and suspension of cables or conductors on the towers or poles. • The clamp body and keepers are malleable iron,cotter-pins are stainless steel.the other parts are steel, all ferrous parts are hot-dip galvanized. • The clamp can be easily installed without damage to the cables or conductors; • Standard: IEC 61284-1997 Technical data sheet Catalog No. mm) (mm) Dimensions (kN) Rated Failure Load kg)

Overhead Line Fittings The suspension clamp is designed for the installation and suspension of cables or conductors on the towers or poles. • The clamp body and keepers are malleable iron,cotter-pins are stainless steel.the other parts are steel, all ferrous parts are hot-dip galvanized. • The clamp can be easily installed without damage to the cables or conductors; • Standard: IEC 61284-1997 Technical data sheet Catalog No. mm) (mm) Dimensions (kN) Rated Failure Load kg)

Overhead Line Fittings The suspension clamp is designed for the installation and suspension of cables or conductors on the towers or poles. • The clamp body and keepers are malleable iron,cotter-pins are stainless steel.the other parts are steel, all ferrous parts are hot-dip galvanized. • The clamp can be easily installed without damage to the cables or conductors; • Standard: IEC 61284-1997 Technical data sheet Catalog No. mm) (mm) Dimensions (kN) Rated Failure Load kg)

Overhead Line Fittings The suspension clamp is designed for the installation and suspension of cables or conductors on the towers or poles. • The clamp body and keepers are malleable iron,cotter-pins are stainless steel.the other parts are steel, all ferrous parts are hot-dip galvanized. • The clamp can be easily installed without damage to the cables or conductors; • Standard: IEC 61284-1997 Technical data sheet Catalog No. mm) (mm) Dimensions (kN) Rated Failure Load kg)