GE PLC

IC697PWR710 GE Power Supply Module IC697PWR710.pdf Product Details: The IC697PWR710 is a Programmable Logic Controller (PLC) power supply module that is installed to a Series 90-70 Baseplate. This module provides the necessary backplane power that is used to energize the modules installed within the same baseplate. The IC697PWR710 operates when connected to an external AC or DC power source specifically, 90-264 VAC at frequency of 47-63 Hz or 100-150 VDC. IC693BEM331

IC697PCM711 GE Programmable Coprocessor Module IC697PCM711.pdf Product Details: The IC697PCM711 module is a programmable coprocessor module that is manufactured by GE Fanuc. Classified under GE Series 90-70, this single-slot programmable coprocessor module comes with a dual-tasking module and it can be programmed to perform different functions. The different functions that the IC697PCM711 module can be programmed to perform include real-time computations, operator interface

IC697MDL940 GE Discrete Output Module IC697MDL940.pdf Product Details: The IC697MDL940 is a Series 90-70 Programmable Logic Controller (PLC) module, specifically a Relay output module with a total of Sixteen relay output channels. Specifically, it has Eight Form C Contact outputs and Eight Form A or Normally Open (N.O.) in Two groups of Four Form A contacts each channel. This module has a nominal voltage rating of 120/240 VAC or 5/24/125 VDC with a maximum power consumption

IC697MDL753 GE Discrete Output Module Product Details: The IC697MDL753 module that is manufactured by GE Fanuc is a negative logic component that is available through GE Series 90-70. The series offers a wide range of programmable logic controller units and accessory parts that extend their capabilities. This output module provides status updates through LEDs that are placed on the top of the unit. The module is capable of operation on TTL levels and it is highly configurable

IC697CPX935 GE CPU Module IC697CPX935.pdf Product Details: The IC697CPX935 is a Series 90-30 Central Processing Unit (CPU). This controller is a single slot CPU module that comes with Three (3) serial ports for communication. Specifically, it has One (1) RS232 Serial port and Two (2) 9-pin D-shell RS485 interfaces. These ports support SNP Slave, Break-Free SNP Slave. SNP slave is supported by all ports while Break-Free SNP slave is available only to Port1 and Port 2.

IC697CPU782 GE CPU Module IC697CPU782.pdf Product Details: The IC697CPU782 is a Series 90-70 Programmable Logic Controller (PLC). This processor module supports Simplex CPU configuration with primary features such as 80386DX microprocessor type with a processing speed of 16 MHz and Boolean execution speed of 0.4 microseconds per function. The IC697CPU782 I/O capacity includes support for up to 12 Kbytes of discrete input and output and 8Kbytes for analog input and output data

IC697CPU731 GE CPU Module IC697CPU731.pdf​ Product Details: The GE Fanuc IC697CPU731 CPU is part of the GE Series 90-70 product line of components that are made to be connected as PLCs or programmable logic controller systems. It is a single-slot CPU, which means that it only needs to be installed in 1 slot in a PLC baseplate to stay securely in place and to operate properly. The purpose of the IC697CPU731 CPU is to process the data it receives from as many as 512 inputs and

IC697CPM915 GE CPU Module IC697CPM915.pdf Product Details: The GE Fanuc IC697CPM915 module is a single-slot programmable CPU module. The IC697CPM915 module can be configured by using Windows or MS-DOS based software for the control of material handling systems, machines, and processes. The CPU programming is performed over Ethernet or through the SNP port. Programmer connections through the Ethernet requires the installation of an optional Ethernet module. IC670GBI102

IC697CPM790 GE Central Processing Unit module IC697CPM790.pdf Product Details: The IC697CPM790 is a Series 90-70 Programmable Logic Controller (PLC) CPU. This CPU is a single slot wide module that is specifically used for critical applications such as Emergency shutdown systems, fire, gas and other applications. This CPU supports Triple Media Redundancy (TMR) by incorporating Standalone C program for enabling autotest routines as well. IC693MDL340 IC694MDL740 IC693MDL645

IC697CMM711 GE Communications Coprocessor Module Product Details: The IC697CMM711 is a communication coprocessor module that is included in the Series 90-70 Product line of Programmable Logic Controller (PLC). This component is a single-slot module that supports CCM, MODBUS RTU, and SNP protocols allowing I/O data exchange over a multi- drop communication network. Specifically, this module supports SNP/SNP-X Protocol (master, slave), CCM Protocol (master, slave, peer), and

IC697CHS782 GE VME Integrator Racks​ IC697CHS782.pdf Product Details: The IC697CHS782 rack is an integrator rack designed by GE Fanuc. This GE Series 90-70 rack has 17 slots in a rear-front configuration. The rack can connect to modules with 0.8-inch spacing. The rack can be integrated with different GE IC697 PLC modules. The rack is compatible with third-party VME modules and it can be integrated with CPUs, different I/O configurations, and other devices and applications.

IC697CHS750 GE Rear Mount I/O Rack IC697CHS750.pdf Product Details: The IC697CHS750 rack is an I/O rack manufactured by GE Fanuc. It connects different components and modules from the GE Series 90-70 PLC product line together. It is equipped with 5 slots and it has a rear mounting mechanism. The rack has an open enclosure and it is suitable for indoor use only. It can be easily mounted on a factory floor. The components that are connected in the 5 slots can have individual

IC697BEM731 GE Bus Controller Module IC697BEM731.pdf Product Details: The IC697BEM731 is a Genius Bus Controller Module that is part of the GE Fanuc Series 90-70 family of Programmable Logic Controller (PLC). This module is primarily used to interface up to Thirty (30) devices and transfers data by passing a token among all the configured devices on the same bus.The IC697BEM731 has One (1) channel for interfacing with devices residing on the same bus, One (1) Hand-Held

IC695RMX128 GE Redundancy Memory Exchange Module Product Details: The IC695RMX128 is a PACSystems RX3i Redundancy Memory Exchange Module. The main function of this module is to act as a single node on a reflective memory topology or as or as dedicated memory module for a redundant RX3i CPU pair. When used in a redundant CPU configuration, the IC695RMX128 reflects the contents of the IC695CMX128. With a reflective memory link, any update on one node is reflected and updated to

IC695LRE001 GE Serial Bus Transmitter Module IC695LRE001.pdf Product Details: The IC695LRE001 Serial Bus Transmitter module is manufactured by GE Intelligent Platforms/GE Fanuc. It belongs to the GE Fanuc RX3i product line and it provides communications between remote backplanes and serial expansion backplanes and the PAC Systems RX3i universal backplane. IC693MDL240 IC694MDL732 IC693MDL340 IC694MDL740 IC693MDL645 IC694MDL742 IC693MDL648 IC694MDL754 IC693MDL740 IC694PWR321

IC695CMU310 GE Redundancy CPU IC695CMU310.pdf Product Details: The IC695CMU310 CPU module is an RX3i PacSystems Max-ON CPU and a Hot-Standby redundancy CPU made by GE Fanuc. It is made to communicate data through dedicated Ethernet LANs. This module must be connected with an RX3i universal backplane, Ethernet modules, Series 90-30 expansion backplanes, PacSystems devices, and the Max-On software to build a complete RX3i system application. IC693MDL240 IC694MDL732 IC693MDL340

IC695ACC402 GE Energy Pack IC695ACC402.pdf Product Details: The IC695ACC402 is an energy pack module that is exclusively used with PACSystem RX3i’s CPE 330 controller. This energy pack is primarily used to provide controller power sufficient to allow execution of memory content transfer from the Random Access Memory (RAM) to the non- volatile memory or Flash memory. This energy pack is a DIN rail-mounted version and connects to the partner controller via the IC695CBL002that

IC694PWR330 GE Power Supply IC694PWR330.pdf Product Details: The IC694PWR330 high-capacity serial expansion power supply module is made by GE Fanuc to serve as an expansion power supply for the GE RX3i PacSystems programmable logic controller or PLCs. The IC694PWR330 power supply module can operate with any CPU in the RX3i product series and it can provide up to 30 Watts of additional power to a PLC. When this module is installed in the PLC, it is meant to be installed in the

IC694PWR321 GE Power Supply IC694PWR321.pdf Product Details: The IC694PWR321 power supply module has been designed and manufactured by GE Fanuc in the RX3i PacSystem series as a PLC power supply. It can be used in any RX3i PLC because it is compatible with all of the GE RX3i CPUs. The IC694PWR321 power supply module is rated at 120/240 Volts AC and 125 Volts DC. It is designed to be a serial expansion device and it needs to be installed in the serial backplane of its host PLC

IC694MDL754 GE Discrete Output Module IC694MDL754.pdf Product Details: The IC694MDL754 is a PACSystem RX3i component. This module is specifically a Thirty-Two (32) point discrete output module with Two isolated groups of Sixteen (16) output channels each and support positive logic wiring configuration. Each channel is designed to provide an output voltage range of 10.2 - 20.0 VDC with nominal voltage output of 12 / 24 VDC and output current per channel of 0.75 Ampere. This