Digital I O Module

OMRON R88G-HPG20A11400B Decelerator for Motor 400W 3 000rpm high functionality and performance More information of OMRON R88G-HPG20A11400B : Specifications Model Straight shaft Straight shaft with key and tap Without brake 200 V 900 W R88M-G90010T R88M-G90010T-S2 2 kW R88M-G2K010T R88M-G2K010T-S2 3 kW R88M-G3K010T R88M-G3K010T-S2 4.5 kW R88M-G4K510T R88M-G4K510T-S2 With brake 200 V 900 W R88M-G90010T-B R88M-G90010T-BS2 2 kW R88M-G2K010T-B R88M-G2K010T-BS2 3 kW R88M-G3K010T-B

GE-Emerson IC693ALG392 8-Channel Analog Current-Voltage Output Module Product Description of IC693ALG392 IC693ALG392 is an Analog Current/Voltage Output Module for the PACSystems RX3i and Series 90-30. The module has eight single-ended output channels with voltage outputs and/or current loop outputs based on installation by the user. Each channel can be generated the configuration software for the subsequent scopes (0 to +10 volts) as unipolar, (-10 to +10 volts) bipolar, 0

IC693PWR330 | GE Fanuc | High Capacity Power Supply 24VDC Output Product Description of IC693PWR330 IC693PWR330 is a High Capacity Power Supply with 30 watts output and 120/240 VAC/125 VDC Input. There are applications that might need high +5V current capacity which may not be present with the standard supply(IC693PWR321).Therefore, this high capacity power supply permits each one of the 30 watts to be utilized from the +5V supply. IC693PWR330 can function from an input

Emerson - GE Fanuc IC693MDL740 90-30 DC Voltage Output Module Product Description of IC693MDL740 The GE Fanuc 90-30 Series IC693MDL740 is a 12/24 positive logic DC output module. This model possesses positive logic so that the module sources current from the positive power bus terminal or the common user to the required loads. The output electronic device is placed in between the output module and the power bus. The rated voltage required for the IC693MDL750 module is 12/24

IC693MDL653 GE Fanuc Input Module, 24 VDC, 32 Point, Voltage Input module Product Description of IC693MDL653 The IC693MDL653 was designed and manufactured by GE Fanuc as an input module with a 24-volt direct current (DC) input voltage range. Furthermore, the average input current is 7.5 milliamperes. The module's on-state voltage is 15 volts of direct current (DC) at a minimum, while its off-state voltage is 6 volts of direct current (DC) at a maximum. Furthermore, the module

IC693CHS391 GE Fanuc CPU Module Base, 10 Slot, EMI Enhanced Product Description of IC693CHS391 The GE Fanuc IC693CHS391 is an expansion plate with ten slots. This expansion plate is designed with a slot at the left end of the baseplate especially for the power supply. The unique size of this slot ensures it is only compatible with a power supply. The user should ensure that the IC693CHS391 is connected to the CPU in the first slot of its baseplate. The first slot of the

IC693PCM301 | GE Fanuc Programmable Coprocessor Module Product Description of IC693PCM301 General: The IC693PCM301 is a Programmable Coprocessor Module (PCM) manufactured by GE Fanuc Automation North America, Inc. It is a high-functioning microcomputer that is compatible with the Series 90-30 Modular CPUs (Programmable Logic Controller system). The programming languages supported by the IC693PCM301 include Modbus RTU, GE Fanuc CCM protocols, MegaBasic and C. This version of

IC693CPU363 | GE Fanuc | CPU 363 Module CPU363 CPU Module Product Description of IC693CPU363 The GE Fanuc IC693CPU363 is a Module of GE Fanuc series 90-30 PLC systems. It connects to one of the CPU slots on a baseplate. This CPU is of type 80386X and has a speed of 25Mz. It gives the baseplate the ability to connect to up to seven remote or expansion baseplates. The power required for it to work is +5VDC and 890mA current. It has a battery to back up a clock and can be

GE-Emerson IC693CPU331 Single-Slot CPU Module Single Slot CPU Module Product Description of IC693CPU331 The IC693CPU331 is a Series 90-30 component that is manufactured by GE Fanuc. This is a single-slot modular CPU. It is installed with a 80188 processor with 10MHz clock speed and maximum user program memory of 16 Kbytes. It supports 512 Discrete Inputs, 512 Discrete outputs, 128 Analog input Words and 64 Words Analog output Words. It has One (1) serial port SNP / SNP-X

IC693APU300 High-Speed Counter (HSC) module GE Automation Product Product Description of IC693APU300 The IC693APU300 is a High-Speed Counter (HSC) module that belongs to the Series 90-30 PLC Platform that is formerly produced by GE Fanuc Automation, however, recently acquired by Emerson Automation. This HSC module is specially designed for use in a variety of processes but not limited to Turbine flowmeter, Meter proving, Velocity measurement, Material handling, Motion Control

IC693CPU350 | GE | I/O System Modules Controller, Programmable Product Description of IC693CPU350 The GE Fanuc IC693CPU350 is a Series 90-30 Processor module. This module is a CPU 363 module with single slot width, processor speed of 25 MHz with typical scan rate of 0.22 ms per 1K of logic for Boolean contacts. It has an embedded user memory of 32KB. This controller utilizes the embedded RS485 communication port installed in the power supply. The IC693CPU350 is a GE Fanuc

IC693CMM302 | Ge Fanuc Series 90-30 Programmable Logic Controller Product Description of IC693CMM302 The GE Fanuc IC693CMM302 is an Enhanced Genius Communications Module. It is quite commonly know as GCM+ for short. This unit is an intelligent module which enables automatic global data communications between any Series 90-30 PLC and up to a maximum of 31 other devices. This is done on a Genius bus. It is possible for the IC693CMM302 GCM+ to be installed on a number of

Honeywell module TC-IXL061 new board in stock We only offer products that are brand new, original, and genuine. We will send you the inner and outer packaging of the product for confirmation before shipping Our Advantage Products: 【Honeywell】Module DCS / PLC 【Emerson】DeltaV Module / Servo Motor 【ABB】Input Output Module 【AB】Module / Touch Screen 【Rosemount】Pressure and Temperature Transmitter 【Yokogawa】Pressure Transmitter 【Yaskawa】Servo Drive / Servo Motor 【Mitsubishi】Servo

ABB AX18-30-10-80 1SBL921074R8010 220-230V50Hz/230-240V60Hz Contactor contactors used for controlling General Information(for AX18-30-10-80) Extended Product Type: AX18-30-10-80 Product ID: 1SBL921074R8010 EAN: 3471522395801 Catalog Description: AX18-30-10-80 220-230V50Hz/230-240V60Hz Contactor Long Description: AX09...AX25 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC. These contactors are of the block type design with: – 3 main

The product identifier "3AUA0000090743" corresponds to a specific item from ABB General Information(3AUA0000090743) Product ID: 3AUA0000090743 ABB Type Designation: 107UF / 1000VAC Catalog Description: 107UF / 1000VAC; FILM CAPACITOR Long Description: 107UF / 1000VAC Key Specifications(3AUA0000090743) Capacitance: 107 microfarads (μF) Voltage Rating: 1000 volts AC (alternating current) Type: Film Capacitor Application(3AUA0000090743) Usage: Typically used in electrical and

PM866AK02 /PM866K02 Ethernet 10 Module ABB Redundant Processor Digital IO Module Units 3BSE050199R6 The CPU board contains the microprocessor and RAM memory, a real-time clock, LED indicators, INIT push button, and a CompactFlash interface. The base plate of the PM866 / PM866A controller has two RJ45 Ethernet ports (CN1, CN2) for connection to the Control Network, and two RJ45 serial ports (COM3, COM4). One of the serial ports (COM3) is an RS-232C port with modem control

IC693CHS391 | GE Fanuc | 10-Slot CPU Baseplates Capacitor Start Motor Product Description of IC693CHS391 The GE Fanuc IC693CHS391 is an expansion plate with ten slots. This expansion plate is designed with a slot at the left end of the baseplate especially for the power supply. The unique size of this slot ensures it is only compatible with a power supply. The user should ensure that the IC693CHS391 is connected to the CPU in the first slot of its baseplate. The first slot of

IC693APU300 | GE Fanuc High Speed Counter Motion Control Product Description of IC693APU300 IC693APU300 is a high speed single slot counter belonging to the 90-30 series of PLCs. The module can be used where pulse input rates are greater than the PLCs input capability or where a significant percentage of the PLC’s processing capability is required. The high-speed counter allows direct processing of rapid pulse signals of up to 1 MHz for industrial applications such as

IC693PCM301 | GE Fanuc Programmable Coprocessor Module Product Description of IC693PCM301 General: The IC693PCM301 is a Programmable Coprocessor Module (PCM) manufactured by GE Fanuc Automation North America, Inc. It is a high-functioning microcomputer that is compatible with the Series 90-30 Modular CPUs (Programmable Logic Controller system). The programming languages supported by the IC693PCM301 include Modbus RTU, GE Fanuc CCM protocols, MegaBasic and C. This version of

The 3ABD64606859 RPBA-01 Profibus Adapter is a specific product offered by ABB General Information Global Commercial Alias: RPBA-01 Product ID: 3ABD64606859 ABB Type Designation: RPBA-01 Catalog Description: RPBA-01, Profibus Adapter Long Description: The RPBA-01 Profibus Adapter is designed for seamless integration into industrial automation systems. It facilitates communication between devices supporting the Profibus DP protocol and ABB automation products. This adapter