Other

The IC660BCM501 is a handheld monitor battery charger from the GE Fanuc Genius I/O family Product description The GE Fanuc IC660BCM501 device is a battery charger which is provided with the GE IC660HHM501 hand-held monitor. The IC660BCM501 battery charger is used to charge the battery pack which is also provided with the hand-held monitor. The IC660BCM501 battery charger can operate at either 115 Volts AC or 230 Volts AC. Before the charger is plugged into AC power source to

The IC660BBD025 is a 5/12/24 VDC 32-Circuit Sink I/O Block,intelligent, configurable module Product description The IC660BBD025 is a Block I/O from the Genius I/O Block series. This device is mainly used to implement distributed I/O architecture as the IC660BBD025 is a fully-functional Genius I/O node that comes with Thirty-Two (32) I/O circuits, a built-in Genius communication terminal, and an integrated Hand Held Monitor (HHM) port. The IC660BBD025 is formerly produced by

The GE Fanuc IC660BBD024 is an intelligent high-density 32-point discrete sourcing Input / Output (I/O) block Product description The IC660BBD024 is a GE Fanuc intelligent Block I/O module. This module is a high-density Thirty-Two (32) point Discrete I/O block that features individually configurable channels as input, output or output with feedback. This module supports Source wiring and provided with resettable self-protecting circuits and advanced diagnostics. The

The IC660TBD022 terminal assembly is a Genius I/O component that is manufactured by GE Fanuc Product description The IC660TBD022 terminal assembly is a terminal assembly that is designed and manufactured by GE Fanuc. This Genius I/O GE terminal assembly has 6 analog input circuits with an accuracy of 0.1%. The alarm limits are programmable for these circuits and all of the faults are displayed by the hand-held monitor and the computer which are both typically used for

The IC660TBA104 terminal assembly is a GE Fanuc terminal with 4 inputs and 2 output circuits Product description The IC660TBA104 terminal assembly from GE Fanuc is part of the Genius I/O series and it comprises 4 input circuits and 2 output circuits. The terminal directs analog currents and converts them to a digital value. The final value is directed to the CPU unit and all the inputs are completely isolated from the block circuits. The IC660TBA104 terminal assembly supports

GE Fanuc IC660TBA026 output block is a current source analog output block,signal rating of 4 to 20 milliamps Product description The IC660TBA026 output block is a GE Fanuc manufactured output block with a current source. It is designed with 6 inputs that can accommodate signals in the range of 4 to 20 milliAmps. The input voltage rating of the block is 115 Volts AC and 125 Volts DC. The main function of the block is to supply power to all the connected circuits. The output

IC660TBA023 GE Fanuc terminal assembly,thermocouple block with a voltage rating of 24/48 Volts DC Product description The IC660TBA023 device is a GE Fanuc terminal assembly. It is a thermocouple block with a voltage rating of 24/48 Volts DC. There are a total of 16 circuits available in the block. It is small in size and this saves a lot of panel space. Its dimension are a height of 8.83 inches, a width 3.50 inches, and a depth of 3.94 inches. It weighs approximately 4 pounds

IC660TBA021 terminal assembly is an RTD input block terminal assembly manufactured by GE Fanuc Product description The IC660TBA021 terminal assembly is an RTD input block terminal assembly manufactured by GE Fanuc. It comes with 6 channels that are equally distributed with 2 circuits in a single group. It is a 24/48 Volts DC rated terminal assembly unit. The main function of the block that the IC660TBA021 terminal assembly hosts is to monitor the temperature level around a

ABB 3BSC950107R1 TK811V015 Duplex POF Cable Transmission Applications Overview The ABB TK811V015 (3BSC950107R1) is a duplex POF cable ideal for short-distance data transmission applications. Its compact size and lightweight design make it suitable for space-constrained environments. POF technology offers a cost-effective alternative to traditional glass fiber optic cables while maintaining reliable signal integrity. The pre-terminated duplex connectors ensure a quick and easy

GE Fanuc IC660BBA023 6 input circuits, 24 to 48 Volts DC of block power, -25 mV to 150 mV of voltage measurements Product description The IC660BBA023 Thermocouple Block is an input block made by GE Fanuc. It has 6 input circuits, 24 to 48 Volts DC of block power, -25 mV to 150 mV of voltage measurements, and 9 Watts of heat dissipation. The IC660BBA023 is a thermocouple manufactured by GE Fanuc. IC660BBA023 has a power supply voltage of 18-56 VDC at 9W, 10% max ripple. The

IC660BBA024 I/O Block from the GE Fanuc Genius I/O Series, rated voltage of 24/48 VDC Product description IC660BBA024 is an I/O Block from the GE Fanuc Genius I/O Series. The block has a rated voltage of 24/48 VDC. IC660BBA024 is mainly used as an interface controller with devices that accept 4mA to 20mA analogue signal. There are four inputs and two outputs. It provides isolated power to all six circuits, thus eliminating the need to separate power from 4mA to 20mA devices.

GE Fanuc IC660TSA020 terminal assembly is a terminal assembly for the I/O block Product description Brand GE Fanuc Series Genius I-O Part Number IC660TSA020 Product Type Terminal assembly Compatible Block IC660BBA020 Operating Temperature 0 to 60 degrees Celsius Minimum Spacing Requirements 2 inches between blocks Compatible Electronics Assembly IC660EBA020 Air-Cooling Supported Wire Gauge 12 AWG Wire The GE Fanuc IC660TSA020 terminal assembly is a terminal assembly for the

Ge Force MX150 The Pascal architecture delivers truly game-changing performance Product description The GeForce MX150 was a mobile graphics chip by NVIDIA, launched on May 17th, 2017. Built on the 14 nm process, and based on the GP108 graphics processor, in its GP108-650-A1 variant, the chip supports DirectX 12. This ensures that all modern games will run on GeForce MX150. The GP108 graphics processor is a relatively small chip with a die area of only 74 mm² and 1,800 million

ABB TK801V012 3BSC950089R3 Extension Cable – 1.2m ABB S800 I/O Description The TK801V012 ModuleBus Extension Cable is a 1.2 m long cable that is used together with TB805/TB845 and TB806/TB846 to extend the ModuleBus. Using this extension I/O modules on the same electrical ModuleBus can be mounted on different DIN rails. Additional Information Medium Description: Modulebus Extension Shielded Cable 1.2m D-sub 25, male-female Product Type: Prefabricated_Cable Ordering HS Code:

ABB TK801V006 3BSC950089R2 Modulebus Extension Shielded Cable Description The TK801V006 ModuleBus Extension Cable is a 0.6 m long cable that is used together with TB805/TB845 and TB806/TB846 to extend the ModuleBus. Using this extension I/O modules on the same electrical ModuleBus can be mounted on different DIN rails. Additional Information ABB Type Designation: TK801V006 with metal D-sub Country of Origin: Poland (PL) Customs Tariff Number: 8544421000 Frame Size: Undefined

ABB TK801V003 3BSC950089R1 Modulebus Extension Shielded Cable In Stock Description The TK801V003 ModuleBus Extension Cable is a 0.3 m long cable that is used together with TB805/TB845 and TB806/TB846 to extend the ModuleBus. Using this extension I/O modules on the same electrical ModuleBus can be mounted on different DIN rails. General info Article number 3BSC950089R1 Additional Information Medium Description: Modulebus Extension Shielded Cable 0.3m D-sub 25, male-female

TY801K01 3BSE023607R1 ABB Shunt Stick TY801 ABB S800 I/O Product Dimensions: The combination of various I/O modules is another special advantage of the AC 800PEC. AC 800PEC is an open system that provides standard interfaces even for modules with custom designs and functions. All internal communication between the controller and I/O modules is entirely via fiber optic links. There is no electrical connection between the controller and any I/O devices. AC 800PEC Combi IO UA

GE UR8HH Universal Relay Systems UR Series CT/VT module intended for installation Product description ManufacturerGeneral Electric MultilinManufacturing LocationMarkham, Ontario, CanadaSoftwareEnerVista URWeight2.55lbs General Electric Multilin’s UR-8HH is a CT/VT module intended for installation in the Universal Relays series. It provides the relay with 1A/5A ground CTs and 3-1A/5A phase CTs, allowing the relay to scale down current ratings and voltage ratings to a value

GE UR9GH Multilin Module 100% New Original Global Presence a CPU Module for the UR Product Description General Electric Multilin’s UR-9GH provides firmware that enables and governs the protective features of the relay, offering control algorithms, logic frameworks, and more. This module can be installed in any of the Universal Relays units and is a necessary component for relay functionality. In addition to these mechanisms, the related software endows the relay with elements

PrPMC8005E-1261 Emerson Processor PMC Module New In Original Description: Emerson / Motorola PrPMC8005E-1261 Processor PMC Module Configuration: • Processor: MPC7410, 450 MHz • L2 Cache: 2 MB • Memory: 256 MB SDRAM • Ethernet: Front • PCI Bus Speed: 33 MHz Part Number: 84-W8649F01B, 04-W3649F-16M Features: MPC7410 Processor 2 MB of L2 Cache 32 MB of Flash Memory 128 MB to 256 MB SDRAM The Emerson / Motorola PrPMC8005E Series Processor PMC Modules are a single-width, standard