GE Module
GE FANUC Parts IC695LRE001 RX3i Bus Transmitter Module 5.0V 132mA
Product Description GE FANUC IC695LRE001 RX3i Bus Transmitter Module 5.0V,132mA Technical Application The RX3i Serial Bus Transmitter Module, IC695LRE001, provides communications between a PACSystems RX3i Universal Backplane (IC695-model number), and serial expansion and remote backplanes (IC694- or IC693-model numbers). It translates the signal levels present in the Universal Backplane to the signal levels required by a Serial Expansion Backplane.The Serial Bus Transmitter
IC695CPK330 RX3i CPU Ethernet GE Module Contains 64Mbytes Durable
Product Description GE FANUC IC695CPK330 RX3i CPU Ethernet Module with Energy Pack Technical Application The PACSystems* RX3i RX3i CPE330 is a richly featured programmable controller CPU equipped with a 1GHz dual-core microprocessor, 64Mbytes of built-in program memory and two independent highspeed Ethernet interfaces. It is ideally suited for multi-tier communications and for synchronizing large amounts of data. Its metal housing provides superior noise immunity. The CPE330
IC695ALG626 RX3i GE FANUC Analog Input Module 16/8 Channels 0.3kg
Product Description GE FANUC IC695ALG626 RX3i Analog Input Module 16/8 Channel Technical Application IC695ALG626 has four internal HART modems. Module IC695ALG628 has two internal HART modems. In single-ended mode, four single-ended channels are multiplexed into each HART modem. In differential mode, two differential channels are multiplexed into each HART modem. Analog input channels can be configured for these ranges: ▪ Current: 0 to 20mA, 4 to 20mA, +/- 20mA ▪ Voltage: +/-
IC695CHS016 Universal RX3i CHS016 Backplane Module GE FANUC Parts
Product Description GE FANUC IC695CHS016 RX3i CHS016 Backplanes Module Technical Application The PACSystems* RX3i Universal Backplanes provide a dual-bus backplane that supports PCI-based (IC695) and serial (IC693 and IC694) I/O and option modules. The RX3i Universal Backplanes also support Series 90-30 IO and option modules. See the PACSystems RX3i System Manual, GFK-2314 for lists of supported modules. The 16-slot Universal Backplane (IC695CHS016), and the 12-slot Universal
IC695ETM001 RX3i Ethernet Interface Module GE FANUC Products
Product Description GE FANUC IC695ETM001 RX3i Ethernet module 10/100 Mbits 2 RJ45 connections one IP address occupies one slot on system base Technical Application The Ethernet Interface Module, IC695ETM001, connects a PACSystems RX3i controller to an Ethernet network. It enables the RX3i controller to communicate with other PACSystems equipment and with Series 90 and VersaMax controllers. The Ethernet Interface provides TCP/IP communications with other PLCs, host computers
IC695CPU310 RX3i Central Processing GE Module High Performance
Product Description GE FANUC IC695CPU310 RX3i Central Processing Module Technical Application The PACSystems* RX3i CPU can be used to perform real time control of machines, processes, and material handling systems. The CPU communicates with the programmer and HMI devices via a serial port using SNP Slave protocol. It communicates with I/O and Intelligent Option modules over a dual backplane bus that provides: High-speed, PCI backplane for fast throughput of new advanced I/O.
IC695ALG628 RX3i GE FANUC Analog Input Module 8 Channel High Flexibility
Product Description GE FANUC IC695ALG628 RX3i Analog Input Module 8 channel Technical Application The PACSystems RX3i family provides advanced diagnostics and high performance I/O. With a modular design and multiple expansion options.RX3i IO is designed for mission critical discrete and process applications. The rack-based IO offers advanced diagnostics and outstanding flexibility, with a wide range of standard and advanced IO. Advantage Products Programmable Logic Controller
GE FANUC Products IC695NIU001 RX3i Ethernet Network Interface Module
Product Description GE FANUC IC695NIU001 RX3i Ethernet Network Interface Module Technical Application The PACSystems* RX3i Ethernet NIU PLUS,IC695NIU001, makes it possible to use PACSystems RX3i and Series 90-30 I/O remotely on an Ethernet network.Once set up by configuration, data exchange is completely automatic. System control can be provided by any master device capable of exchanging Ethernet Global Data(EGD). The Ethernet NIU automatically provides the controller with
IC695CPU315 RX3i Central Processing Unit GE Module Original Package
Product Description GE FANUC IC695CPU315 RX3i Central Processing Unit Module Technical Application The RX3i CPU can be used to perform real time control of machines, processes, and material handling systems. The CPU communicates with the programmer and HMI devices via a serial port using SNP Slave protocol. It communicates with I/O and smart option modules over a dual backplane bus that provides: High-speed PCI backplane for fast throughput of new advanced I/O. Serial
RX3i Profinet Controller FANUC GE Module IC695PNC001 PNC001 CO Approval
Product Description GE FANUC IC695PNC001 RX3i Profinet Controller Module Technical Application The PACSystems* RX3i PROFINET Controller module, IC695PNC001 or PNC001, connects a PACSystems RX3i controller to a high-speed PROFINET local area network. It enables the RX3i controller to communicate with I/O devices on the LAN. The PNC001 provides all the functions, services, and protocols required for certification as a PROFINET I/O Version 2.2 I/O Controller, running at both 100
IC695PBM300 RX3i GE Module Profibus Slave Module Supports All Standard Data Rates
Product Description GE FANUC IC695PBM300 RX3i PROFIBUS Master Module Technical Application The IC695PBM300 module provides the following features: ▪ supports up to 125 PROFIBUS-DP slaves ▪ supports up to 244 bytes of input data and 244 bytes of output data per slave ▪ Supports up to 3,584 bytes of input data and 3,584 bytes of output data total ▪ Supports all standard data rates ▪ Supports Sync and Freeze modes ▪ Supports DP-V1 Read, Write and Alarm messages ▪ PROFIBUS
IC695CRU320 PACSystems RX3i GE FANUC CPU Redundancy CPU High Speed
Product Description GE FANUC IC695CRU320 PACSystems RX3i Redundancy CPU Technical Application The PACSystems* RX3i Redundancy CPU can be used to perform real time control of machines, processes, and material handling systems. The CPU communicates with the programmer and HMI devices via a serial port using SNP Slave protocol. It communicates with I/O and smart option modules over a dual backplane bus that provides: ▪ High-speed PCI backplane for fast throughput of new advanced
IC695CPE310 RX3i CPE310 GE Module Controllers CPU Module User Friendly
Product Description GE FANUC IC695CPE310 RX3i CPE310 Controllers CPU Module Technical Application IC695CPE310 has a 1.1 GHz Atom processor and 10 MB of memory. Its embedded Ethernet interface accommodates two connections rated for 10Mb/sec and 100Mb/sec. It also has RS-485 and RS-232 serial ports. The module supports up to 512 program blocks, each of which can be as large as 128 KB. Features: Programming tools such as tag-based programming, a library of reusable code and a
IC695ECM850 RX3i ICE 61850 Communication Module GE FANUC Parts
Product Description GE FANUC IC695ECM850 RX3i ICE 61850 Communication Module Technical Application RX3i IO is designed for mission critical discrete and process applications. The rack-based IO offers advanced diagnostics and outstanding flexibility, with a wide range of standard and advanced IO. Features: High-speed and patented technology for faster throughput Hot swap capability A variety of voltage ranges and current capacities to meet your application needs. Advantage
IC695SPF550 RX3i FANUC GE Module PROFINET Controller Module Durable
Product Description GE FANUC IC695SPF550 RX3i PROFINET Controller Module Technical Application The PACSystems™ RX3i PROFINET Controller module, IC695PNC001 or PNC001, connects a PACSystems RX3i controller to a high-speed PROFINET local area network. It enables the RX3i controller to communicate with I/O devices on the LAN. The PNC001 provides all the functions, services, and protocols required for certification as a PROFINET I/O Version 2.2 I/O Controller, running at both 100
IC695PNS001 RX3i PNS001 FANUC GE Module Scanner Module CO Certified
Product Description GE FANUC IC695PNS001 RX3i PNS001 Scanner Module Technical Application The PACSystems* IC695PNS001 RX3i PROFINET Scanner and IC695PNS101 RX3i Advanced PROFINET Scanner modules connect a remote universal RX3i I/O rack of Series 90-30 or RX3i modules to a PROFINET I/O Controller. The PROFINET Scanner scans the modules in its rack, retrieving input data and providing output data, and exchanges that data on the PROFINET I/O LAN at the configured production rate
IC695PNS001 RX3i GE Module Advanced PROFINET Scanner Module New
Product Description GE FANUC IC695PNS001 RX3i Advanced PROFINET Scanner Module Technical Application The PACSystems* IC695PNS001 RX3i PROFINET Scanner and IC695PNS101 RX3i Advanced PROFINET Scanner modules connect a remote universal RX3i I/O rack of Series 90-30 or RX3i modules to a PROFINET I/O Controller. The PROFINET Scanner scans the modules in its rack, retrieving input data and providing output data, and exchanges that data on the PROFINET I/O LAN at the configured
IC695EIS001 RX3i GE Module Ethernet IEC 104 Server Module Long Lifespan
Product Description GE FANUC IC695EIS001 RX3i Ethernet IEC 104 Server Module Technical Application The RX3i Ethernet IEC 104 Server Module hosts the IEC104 Server side protocol on a common RX3i ETM001 module hardware platform. Thus, many of the specifications and behaviors are shared with the ETM001 module including protocol support. IC695EIS001 is an Ethernet-connected module that fits in the RX3i backplane and permits the RX3i to behave as a Server on the IEC104 network.
GE FANUC Parts IC695RMX128 RX3i Redundant Memory Module Xchange
Product Description GE FANUC IC695RMX128 RX3i Redundant Memory Module Technical Application The RX3i Control Memory Xchange, IC695CMX128, module provides deterministic sharing of data among PLCs and other computing devices on a high-speed fiber optic network, using reflective memory technology. A reflective memory network can contain up to 256 nodes. Each node in the network can be any reflective memory device that is compatible with the 5565 family86. When data is written to
IC695CPE330 RX3i CPE330 GE FANUC Module New Original With Sealed
Product Description GE FANUC IC695CPE330 RX3i CPE330 Controller Module Technical Application The PACSystems™ RX3i CPE330 is a richly featured programmable controller CPU equipped with 64Mbytes of built-in program memory and two independent high-speed Ethernet interfaces. It is ideally suited for multi-tier communications and for synchronizing large amounts of data. Its metal housing provides superior noise immunity. The CPE330 is programmed and configured over Ethernet via