SRB Machine

SRB Machine with Machining Speed 150rpm/min Ⅰ. Description of Boring Bar and Boring Bar Bracket 1) The Boring bar meets the customer's requirements, with a length of 5 meters, with boring processing and random matching; 2) The boring bar bracket adopts a split structure, and when replacing the boring bar, the boring bar and support sleeve are replaced together; 3) There is a reasonable lubrication method between the boring bar and the support sleeve. Ⅱ. Parameters SRB

SRB Machine Suitable for Different Workpiece Materials Ⅰ. Chip Removal Method and Cooling System 1) The chip removal method adopts the outward discharge at the head of the bed: Cutting fluid → Boring bar box → Boring bar inner hole → Chip removal and tool cooling → Head end chip removal box → Oil tank; 2) The chip removal box is equipped with an anti-chip splashing protection device; 3) Equipped with a chip conveyor. Ⅱ. Parameters SRB Model SRBE8000/400SNC1W Machine Color As

SRB Machine with Ra 0.037 Roughness of the Finished Tube Ⅰ. Details of Boring Bar Box 1) Adopting high-power drive motors, with a reasonable speed range; 2) Be driven by gear and rack or screw; 3) The drive motor and feed motor are equipped with torque sensors, which servo adjust the cutting amount; 4) Equipped with soft and hard limit devices on the boring bar box on the lathe bed to protect the equipment; 5) When boring, skiving, and rolling, the boring bar does not rotate,

SRB Machine with Schneider Electrical Components Ⅰ. Basic Functions of the Control System The control system should have at least the following basic functions: a) The electrical cabinets are all sealed and enclosed, with air conditioning for dehumidification, installation of frequency converters, and the use of a sealed two-cycle system electrical cabinet (with circulating fans both inside and outside) to serve the driving device. The electrical cabinet has a protection

High-Frequency Quenching Guide Rail SRB Machine Ⅰ. Detail of Hydraulic System: 1) The hydraulic system is used for automatic tightening and contraction of scraping and rolling tools, as well as driving other hydraulic components; 2) The working pressure of the hydraulic system is determined by the manufacturer based on the working pressure of each hydraulic component; 3) For commonly disassembled oil pipes, use quick-change joints and use soft oil pipes. Ⅱ. Parameters SRB

HRC50 Durable Guide Rail SRB Machine Ⅰ. Advantage 1. The bed design has a relatively low height, which is more suitable for Asian workers to operate. The bed is heavy, and the machine tool does not need to be fixed with feet. 2. The contact surface between the moving parts of the machine tool, such as the main axle box, pressure head, workpiece head, etc., and the guide rail is manually scraped and machined. Ⅱ. Parameters SRB Model SRBF700/250NC ID of Tube 25mm Total Length