Molybdenum Tungsten Alloy

MW30 Molybdenum Tungsten Alloy Sheet 2.0mm Thickness 1. Product Description of MW30 Molybdenum Tungsten Alloy Sheet 2.0mm Thickness: Excellent creep resistance, low resistivity, good corrosion resistance, high thermal conductivity, and little thermal expansion are all characteristics of molybdenum. In comparison to molybdenum or molybdenum alloys, molybdenum tungsten alloy (Mo-W Alloy) has good performance in preventing corrosion of molten zinc and may be employed at higher

50%W High Strength Tungsten Molybdenum Alloy Bar 1. Product Description of High Strength Metal Alloys Bar Molybdenum 50%W Polished Surface: Tungsten-molybdenum alloy rods can be used as high-temperature components in rockets, missiles, filaments, parts and other high-temperature materials under corresponding high-temperature conditions due to their good high-temperature strength, similar properties to tungsten and smaller specific gravity than tungsten. 2. Size of High

30%W Tungsten Molybdenum Alloy Rod Diameter 30mm 1. Material description of 30%W Tungsten Molybdenum Alloy Rod Diameter 30m: Tungsten-molybdenum alloy has the common characteristics of tungsten and molybdenum metal, and has good high temperature stability, resistivity and good processing performance under vacuum or inert gas protection. 2. Size of 30%W Tungsten Molybdenum Alloy Rod Diameter 30m: Diameter 5~150mm Length

High Melting Point 70%Mo Molybdenum Tungsten Alloy Tube 1. High Melting Point 70%Mo Molybdenum Tungsten Alloy Tube Specifications: The properties of tungsten and molybdenum metal are shared by the tungsten-molybdenum alloy, which also exhibits good high temperature stability, resistivity, and processing performance when protected by a vacuum or inert gas. Tests have shown that the alloy with 30% tungsten and 70% molybdenum has a unique anti-corrosion effect on liquid zinc. 2.

W30% Tungsten Molybdenum Alloy Disc 1. Specification of Tungsten Molybdenum Alloy Disc: An alloy made of tungsten and molybdenum is referred to as tungsten-molybdenum alloy. The tungsten content of commonly used tungsten-molybdenum alloys is 30% to 50% (mass). The procedure used to prepare tungsten-molybdenum alloys, which can be used to create rods, plates, wires, and other shapes, is the same as the one used to prepare metal molybdenum and metal molybdenum alloys. W-Mo