CWF LONGKING

The electromagnetic hammer shaker consists of an electromagnetic coil wound around a high-strength coil frame, which is assembled in a steel protective cover for safe outdoor use. It removes dust deposited on the electrode plates and wires of the electrostatic precipitator through mechanical vibration. Electrical technical characteristics: Maximum current (instantaneous) 30Amps Operating voltage 220VDC Typical electric pulse time is 50mSec Maximum impact energy 26.5J The

The electromagnetic hammer shaker consists of an electromagnetic coil wound around a high-strength coil frame, which is assembled in a steel protective cover for safe outdoor use. It removes dust deposited on the electrode plates and wires of the electrostatic precipitator through mechanical vibration. Electrical technical characteristics: Maximum current (instantaneous) 30Amps Operating voltage 220VDC Typical electric pulse time is 50mSec Maximum impact energy 26.5J The

The electromagnetic hammer shaker consists of an electromagnetic coil wound around a high-strength coil frame, which is assembled in a steel protective cover for safe outdoor use. It removes dust deposited on the electrode plates and wires of the electrostatic precipitator through mechanical vibration. Electrical technical characteristics: Maximum current (instantaneous) 30Amps Operating voltage 220VDC Typical electric pulse time is 50mSec Maximum impact energy 26.5J The

The HZHB-SMG bag dust collector controller adopts a modular design, with the CPU first using the PIC16FF series processor, which has two main types: CPU module (HZTCX-AX, HZTCX-BX, etc.) and output expansion module (HZTCX-EX). The CPU module is used and equipped with a digital display, 3 buttons (setting button, plus/minus button, shift button), and a user-friendly human-machine interface. The module provides 8-16 switch outputs. HZHB-SMG bag dust collector controller

Convert the secondary voltage and current of the silicon rectifier transformer of the electrostatic precipitator into voltage signals of 0-10V and 0-6V, and display and control them in the control cabinet, forming a closed-loop control system to protect the transformer. 119 samples the secondary voltage, GND is grounded, and 122 is grounded for the secondary current. Please indicate the model of the transformer when selecting: such as 0.4A/72KV, 0.5A/72KV, and various models

Damping Resistor 700 Ω ZG12-1200W/700 Ω 470*165*165 Damping Resistor 500 Ω ZG12-1200W/500 Ω 470*165*165

Damping Resistor 500 Ω ZG12-1200W/500 Ω 470*165*165 Damping Resistor 700 Ω ZG12-1200W/700 Ω 470*165*165

Module ROW rapping ESP Type ; MZD-HX Ver : 2.1 S-14898

Heater cable Hold heat 1.5 mm TB40008 Length: 100 meter 8421999090 Kabel Heater Tahan Panas 1.5 mm TB40008 Length: 100 meter 8421999090

mA Meter 6C2 GB7676-98 0-800 1mA

Kv Meter 6C2 GB7676-98 100նA

Ampere meter 6L2 GB7676-98 500 5

Volt Meter 6L2 GB7676-98 0-450

SEMICONDUCTOR DEVICE, DIODE

Current Transformer Type 200/5A

Module ROW rapping ESP Type ; MZD-HX Ver : 2.1 S-14898 ESP module ROW Board: BJSC-01 AZD-MIO AZD-DY CTR-01 TXFPB AZD-MIO AZD-ZK AZD-HIO AZD-CY MZD-XK AZD-RJ AZD-ZK MZD-HX MZD-LX MZD-HX MZD-LX

Heater Insulation Ceramic T508-3 Diameter 650 mm

Tranducer ESP BF-3 Convertor ESP 0 ~ +10V (Is GND) Input 1 : Current of ESP (0 ~ +10V) (Is GND) 4 ~ 20mA (Io+ Io-) Output 1 : 4 ~ 20mA (Io+ Io-) ESP 0 ~ - 10V (Vs GND) Input 2 : Voltage of ESP (0 ~ - 10V) (Vs GND) 4 ~ 20mA (Vo+ Vo-) Output 2 : 4 ~ 20mA (Vo+ Vo-)

Module Sampling Board Esp Type; MVC196-04B VER : 0.0 Module Sampling Board Esp Type ; MVC-196-04C V1.0

Resistor bambu type RX20-50 10Ω±5%