SICK

Specs at a glance Measured variables O2 Measuring range O2: 0 ... 5 Vol.-% / 0 ... 100 Vol.-% Ambient temperature range –20 °C ... +60 °C

Specs at a glance Measured variables Visibility (K-value), NO, NO2, NOx, CO, Temperature Measuring range K-value: 0 ... 15 km⁻¹ / 0 ... 200 km⁻¹ NO: 0 ... 20 ppm / 0 ... 45 ppm NO2: 0 ... 1 ppm / 0 ... 5 ppm CO: 0 ... 100 ppm / 0 ... 300 ppm Temperature: -25 ... +55 °C / -25 ... +75 °C Conformities ASTRA "Guideline - Ventilation of Road Tunnels" (2008) RABT 2006 RVS 09.02.22

Specs at a glance Process temperature -40 °C ... +220 °C Measuring range Scattered light intensity: 0 ... 7.5 mg/m3 / 0 ... 3,000 mg/m3 Measuring ranges freely selectable; nine measuring ranges pre-configured (0 ... 7.5/15/45/75/150/225/375/1,000/3,000 mg/m3) Conformities TÜV type test Suitability tested acc. DIN EN 15267-1 (2009), DIN-EN 15267-2 (2009), DIN EN 15859 (2010), DIN EN 14181 (2014) Certified for use as Dust monitor and Leak monitor for filter control downstream

Specs at a glance Measured variables Overheight Measuring range ≤ 100m for outdoor management Ambient temperature range –25 °C ... +55 °C Degree of protection IP67

Description Visibility measuring device incl. connecting cable, with male connector, length 5 m, with RS-485 interface and binary input Measured values Standard visual range, K-value Maximum number of measurands 1 Measurement principles Scattered light forward Spectral range 640 nm ... 660 nm Laser, protection class 2, power < 1 mW Measuring ranges Standard visual range 10 ... 500 m / 10 ... 16,000 m Output range freely adjustable Response time (t90) 2 s ... 300 s Accuracy ±

MERCEM300Z emission monitoring solution Specs at a glance Measured variables Hg Ambient temperature range MERCEM300Z: –20 °C ... +50 °C MERCEM300Z Indoor: +5 °C ... +35 °C Process temperature ≤ +1,300 °C

Gas Analyzers METPAX300

Specs at a glance Process temperature -40 °C ... +220 °C Measuring range Scattered light intensity: 0 ... 7.5 mg/m3 / 0 ... 3,000 mg/m3 Measuring ranges freely selectable; nine measuring ranges pre-configured (0 ... 7.5/15/45/75/150/225/375/1,000/3,000 mg/m3) Conformities TÜV type test Suitability tested acc. DIN EN 15267-1 (2009), DIN-EN 15267-2 (2009), DIN EN 15859 (2010), DIN EN 14181 (2014) Certified for use as Dust monitor and Leak monitor for filter control downstream

SICK MARSIC200 Gas Analyzers MINESIC700 TBS

Gas Analyzers PowerCEMS50 MCS300P HW MCS100E PD SFDS MCS100E HW MCS100E CD MCS100FT

Specs at a glance Measured variables Visibility (K-value) Measuring range Visibility (K-value): 0 ... 150 km⁻¹ Temperature measurement (option): -30 ... +70 °C Ambient temperature range –20 °C ... +55 °C Conformities ASTRA "Guideline - Fire Detection in Road Tunnels" (2007) RABT 2006

Gas Analyzers MINESIC700 GHG

System for ambient-temperature gas analysis in the cement industry This product can meet system requirements to provide continuous monitoring of CO, O2, NOx during the production process. Based on a system of manual control for operations such as sampling, back-purging, and draining, the system’s internal control unit can automatically perform the tasks of sampling, back-purging, and draining to reduce the workload of maintenance staff.

SMC209 C, the extractive flue gas humidity analyzer The SMC902 C flue gas humidity analyzer is designed for use in the continuous emission monitoring systems of stationary pollutant emitters to measure flue gas humidity. The device utilizes an anti-wear and anti-corrosion installation that overcomes the high-temperature flue gas problems of particulates, high temperature, and acid corrosion. It can remain on-line and provide long-term stable measurement of flue gas humidity

This product can meet system requirements to provide continuous monitoring of CO during the production process. Based on a system of manual control for operations such as sampling, back-purging, and draining, the system’s internal control unit can automatically perform the tasks of sampling, back-purging, and draining to reduce the workload of maintenance staff.

Specs at a glance Measured variables CO2, SO2 Measuring range CO2: 0 ... 25 Vol.-% SO2: 0 ... 100 ppm / 0 ... 500 ppm Conformities MARPOL Annex VI and NTC 2008 – MEPC.177(58) Guidelines for exhaust gas cleaning systems – MEPC.340(77) DNV Rules for Type Approvals (DNVGL-CG-0339)

Specs at a glance Measured variables CO, NO, NO2, NOx, SO2, CH4, N2O, CO2, O2 Ambient temperature range Indoor: +5 °C ... +40 °C Can be expanded on the system side if necessary Indoor with cooling unit: +5 °C ... +50 °C Can be expanded on the system side if necessary Outdoor: –20 °C ... +50 °C Can be expanded on the system side if necessary

Field of application Shelter solutions are primarily used to protect the installed analyzer systems from extreme ambient conditions such as heat, cold, dust, wind, earthquakes and corrosive or explosive atmospheres. They also offer advantages for transport as well as on-site installation and maintenance. At the factory, everything is coordinated and pre-installed in the shelter in a clear manner. Each shelter can be equipped to fit individual customer requirements.

The SMC900 collects, processes, computes, saves, reports, and transmits data. It can transmit data via modem (modem or GPRS) to environmental protection authorities and enables users to carry out remote monitoring and link it into the distributed control system.

Specs at a glance Measured variables O2 Measuring range O2: 0 vol. % ... 5 vol. % 0 vol. % ... 25 vol. % 0 vol. % ... 100 % Ambient temperature range -20 °C ... +60 °C Can be expanded on the system side if necessary