Clean Room Pass Box

Mechanical Interlock Pass Box | Convex Door & Hybrid CR Steel 201 SS | 760x660x690mm | Industrial Grade The Convex Door Mechanically Interlocked Pass-Through Window is a contamination control system designed for safe material transfer between cleanroom environments, complying with ISO 14644-1 standards. Ideal for pharmaceutical, biotechnology, and electronics industries, it integrates outside cold plate baking paint and inside 201 sanding stainless steel, double doors with

304 Stainless Steel Flat Door Pass Box | Cleanroom Equipment | FDA/ISO Certified Pharma & Lab Use ISO 14644-1 Class 4 particle control ANSI/ESD S20.20-2021 electrostatic protection USP cleanability compliance Structural Validation: 2.5mm reinforced frame withstands 250Pa pressure differential Deployed in mRNA vaccine isolators, semiconductor lithography bays, and BSL-3 containment suites. Parameter Name parameter Material 304 sanded stainless steel Window Design Double doors

201 Stainless Steel Pass Box | Convex Door & Mechanical Interlock | 760x660x690mm Industrial Grade | Factory & Warehouse Use Engineered for Critical Environment Integrity Advanced Material Science: 201 sanded stainless steel (Ra≤1.0μm) with diamond-cut edge sealing Passes ASTM E3106-17 biofilm adhesion tests (＜5 CFU/cm² residual) Intelligent Safety Logic: Triple-sensor mechanical interlock (pressure/position/timing) prevents 100% concurrent door opening Fail-safe emergency

304 Stainless Steel Cleanroom Pass Box | Wide Flat Door Design | 800x800x800mm Ext/Int Sizes | Lab & Pharma Use Advanced Aseptic Transfer System: Flat Door Mechanically Interlocked Pass-Through Window Engineered for Critical Environment Integrity Aerodynamic Contamination Control: Dual HEPA-filtered air curtains (0.5m/s laminar flow) maintain ISO Class 4 particle levels during transfers Dynamic pressure balancing system (±2Pa stability) prevents air turbulence Material

201 Stainless Electronic Pass Box | 800x680x760mm | Flat Door & Sensor Pharma Mode: CIP/SIP-ready surface (withstands 1.5M NaOH cycles) for cytotoxic drug isolators Integrated particle counter (0.3μm sensitivity) with GMP data logging Electronics Mode: Vibration-isolated transfer platform (The flat door design eliminates protruding handles or mechanisms, making it ideal for space-constrained cleanrooms where wall or floor space is limited. The 800x680x760mm dimensions balance

GMP/ISO-Certified Flat Door Pass Box | 304 Stainless Steel & Anti-Corrosion | Pharma/Electronics Grade Multi-Layer Contamination Defense: Flat Door Mechanically Interlocked Pass-Through Window Engineered for Ultra-Strict Cleanroom Protocols Triple Barrier Protection: Layer 1: 304 sanded stainless steel interior (Ra≤0.5μm) with electropolished finish Layer 2: Intermediate cold plate baked coating (IP56 chemical resistance) Layer 3: Outer epoxy anti-static coating (10^8-10^10Ω

201 Stainless Flat Door Pass Box | Mechanical Interlock | 760x670x720mm Industrial-Grade Contamination Barrier: Flat Door Mechanically Interlocked Pass-Through Window Precision Engineered for Critical Environments Hybrid Material Excellence: Exterior cold plate baked coating (IP55 corrosion resistance) + interior 201 sanded stainless steel (Ra≤0.7μm) withstands 100+ CIP/SIP cycles. Airflow-Validated Security: Mechanical interlock system achieves 99.97% HEPA-filtered air

GMP-Compliant Flat Door Pass Box | 304 Stainless Steel |Pharma Grade Pharma-Grade UV: Programmable 254nm UV-C cycles (0-60min) with motion-sensing safety cutoff for GMP environments. Diagnostic Lighting: 500 Lux medical-grade LEDs with color temperature adjustment (3000K-6500K) support visual inspections. Electronics Mode: Faraday cage grounding option neutralizes static during wafer transfers (＜10V residual charge). Biotech Ready: Radiused corners (R≥3mm) and seamless welds

GMP-Certified Flat Door Pass Box | 201 Stainless Steel & Mechanical Interlock | Pharma/Electronics Grade ISO 14644-1 Certified Flat Door Mechanically Interlocked Pass-Through Window Engineered for Contamination-Free Material Transfer Dual Safety Assurance: Mechanical interlock system prevents simultaneous door opening, eliminating 99.9% airborne cross-contamination risks in ISO Class 5-8 environments. Enhanced Hygiene: 201 brushed stainless steel construction (Ra≤0.8μm) with

Floor Pass Box: 201 Steel, GMP Pharma Grade A high-efficiency HEPA filtration system (≥99.995% efficiency at 0.3μm) delivers laminar airflow with velocities of 13–25 m/s, effectively removing particulate contaminants and preventing cross-contamination. The four adjustable stainless steel air nozzles provide targeted airflow customization for thorough decontamination of materials, while the electronic interlocking mechanism ensures sequential door operation, maintaining

GMP-Certified Floor Pass Box | 201 Stainless Steel & Interlock System | Pharma/Electronics Grade Medical-grade 304 stainless steel with anti-corrosive electrostatic coating (Ra≤0.6μm, ASTM B117 >500h salt spray resistance). Dual-pane tempered glass (8mm thickness, RAL 9005 silk-screened borders) for 28dB noise reduction (ISO 10140-2 tested) and distortion-free visibility. Multi-stage HEPA/ULPA filtration (99.995% efficiency @0.3μm, EN 1822 certified). Dynamic airflow nozzles

GMP/ISO-Certified Air Shower Pass Box | 304 Steel & Electronic Interlock | Pharma/Electronics Grade Engineered for precision material transfer between ISO Class 5-8 cleanrooms, this Air Shower Pass-Through Window integrates advanced contamination control technologies to meet rigorous industry standards in pharmaceuticals, biotechnology, and electronics. Parameter Name parameter Material 304 stainless steel with baking paint outside Window Design Double-layer tempered glass

GMP-Certified Air Shower Pass Box | 201 Stainless Steel & Corrosion-Proof | Pharma/Electronics Grade Crafted with 201 stainless steel featuring a baked epoxy-polyester hybrid coating (Ra≤0.8μm surface roughness), this transfer window delivers: Enhanced Corrosion Resistance: ASTM B117 salt spray test >500 hours, compliant with ISO 9227 C5 industrial standards. Sanitization-Optimized Surfaces: Non-porous electropolished finish (Ra≤0.5μm post-treatment) for CIP/SIP compatibility

ISO-Certified Air Shower Pass Box | 304 Steel & 0.8kW Energy-Smart | Pharma/Food Grade Medical-grade 304 stainless steel housing with anti-corrosive electrostatic coating (Ra≤0.6μm). HEPA/ULPA filtration (99.995% particle retention @0.3μm) with real-time pressure monitoring. Aerodynamic nozzle array (4× SUS304 nozzles, 13–25 m/s adjustable airflow). Smart Access Control: Electromagnetic interlock with cycle counter, door status alerts, and audit trail logging (GMP 21 CFR Part

GMP Air Shower Pass Box | 760x690x1490mm | 201 Stainless Steel & E-Interlock Engineered with seamless cleanroom-grade illumination, the transfer chamber ensures accurate visual monitoring of sensitive materials. Its Yes. The 201 stainless steel build offers robust corrosion resistance, making it suitable for environments where regular cleaning with disinfectants is essential. Its durable surface resists particle buildup and simplifies maintenance, reducing downtime. The pass

Pharma Grade A Pass Box for Sterile Transfer | 304 Steel & 0.3μm Filtration Integrated clean lighting illuminates the transfer chamber for precise material handling, while the system’s low noise design ensures minimal disruption to lab or production workflows. This combination of performance and user-centric engineering makes it ideal for applications where both productivity and environmental comfort are critical. Parameter Name parameter Material 304 stainless steel Window

ISO-Certified Air Shower Pass Box | 201 Stainless Steel & HEPA H13 | Pharma/Electronics Cleanrooms A high-efficiency filtration system , including HEPA H14 filters (≥99.995% efficiency at 0.3μm), ensures laminar airflow with velocities of 13–25 m/s, effectively removing particulate contaminants and preventing cross-contamination. The adjustable air nozzles deliver targeted airflow for thorough decontamination of materials, while the system’s electronic interlocking mechanism

Parameter Specification Structure Dual-layer stainless steel chambers Interlock System Electronic sensor control (fail-safe logic) Material 304 Stainless steel / Powder-coated steel Viewing Window Double-layer tempered glass (5-8mm thickness) Sealing EPDM gasket (ISO Class 4~8 compatible) Control Panel Touchscreen HMI with cycle log & alarm Safety UV sterilization option / Pressure equalization port Size Options Customizable (e.g. 600×600×800mm) Product Description Advanced

Introducing our premium Triple-Layer Mechanically Interlocked Pass-Through Window: Engineered for maximum safety and contamination control in critical environments like laboratories, cleanrooms, and pharmaceutical settings. This robust unit features three distinct chambers with advanced mechanical interlocks, ensuring absolute isolation and preventing cross-contamination by guaranteeing only one door can be open at any time. Parameter Specifications: Main body material: 1.2mm

201 Stainless Steel Pass Box | Heavy-Duty 960x860x890mm | Convex Door & Mechanical Interlock | Industrial Grade The Convex-Door Interlocked Pass-Through Chamber is an ISO 14644-1-compliant contamination control system engineered for secure material transfers between critical cleanroom environments. Designed for pharmaceutical, biotech, and microelectronics applications, it combines 201 sanded stainless steel construction with a dual-door configuration featuring tempered