Plunger Motor

A2FM32/61W-VAB010H is a hydraulic motor product produced by Rexroth. This product belongs to the A2FM series. This series of motors are usually used in open and closed static voltage voltage transmission systems. It has high power density, smaller size, high total efficiency, and good startup characteristics. Specifically, the characteristics of A2FM32/61W-VAB010H motor include: -The axial cone -shaped plunger rotor group, this design can improve the power density and

A2FE45/61W-VZL100 product introduction The specification parameters and performance characteristics of this product are as follows: -S product model: A2FE45/61W-VZL100 -Displacement: 32.1cm :/Rev -The scope of application: suitable for various occasions that require hydraulic transmission, such as walking machinery and fixed applications, etc. In general, A2FE45/61W-VZL100 is a quantitative motor with high-efficiency, high-power density, has the characteristics of small size

Danfoss OMS315 151F0548 Introduction to hydraulic motors The Danfoss OMS315 151F0548 is a hydraulic motor manufactured by Danfoss as part of the OMS family. Key features of this motor include: Structure: plunger type Load type: axial motor Speed type: High speed motor Rated current: 0.63A Rated voltage: 24v Rated power: 1.8kw Rated speed: 10nm Working pressure: 1mpa Torque: 100r/min Technical specifications Brand Danfoss Type number OMS315 151F0548 Working pressure 1mpa

DANFOSS Swing Motor OMM 50 151G0013 Product Introduction OMM 50 151G0013 is a line motor produced by Danfoss Danfoss. This motor is known for its high -speed and small torque, and is suitable for application scenarios that require precise control. The following is a detailed information about the product: Brand: Danfoss Model: OMM 50 151G0013 Features: high speed torque, suitable for high -speed motor applications Rating current: 0.63A Rated voltage: 24V Rated power: 1.8kW

Danfoss 505540A3120AAAAAS Putting Motor Product Introduction Features and advantages Precision distribution system: ensure the high work efficiency of the motor, thereby reducing fuel consumption. Extensive application opportunities: suitable for closed and open hydraulic circuits for work and walking systems. Rich product portfolios: including O series, T series, and sensors, covering different specifications and load requirements. Strict test process: All motors have

Danfoss OMT 400 151B0401 Placing Motor Product Introduction DANFOSS OMT 400 151B0401 is a small, low -speed, and high -torque hydraulic motor with an internal meshing swing gear. This motor is favored by the market for its simple structure and good low -speed performance. It has a strong short -term overload capacity, which is very suitable for use on various machinery and equipment, such as construction equipment, agricultural equipment, material handling and lifting

OMT500 151B3005 is a hydraulic motor produced by Danish Danfoss, which belongs to the OMT series. This motor is suitable for a variety of different hydraulic media and has anti -corrosive parts, so that it can work in a harsh environment. The specific parameters and technical data of OMT500 151B3005 can be found in Denfoss's motor samples. These samples usually provide detailed information about the function, use, selection, and hydraulic system of the motor. Technical

Danfoss motor OMT 400 151B3004 product introduction OMT 400 151B3004 is a hydraulic motor produced by Danish Danfoss, which belongs to the OMT series. The main characteristics of this motor are as follows: Rating parameters: The rated current of the motor is 0.63A, the rated voltage is 24V, the rated power is 1.8kW, the rated speed is 10nm, and the working pressure is 1MPa. Structural form: adopt a plunger -like structural form. Torque: The torque of the motor is 90R/min.

Danfoss motor OMT 500151B3005 product introduction Brand and Model: OMT 500 151B3005 is the product of Danish Denfoss. The model represents the specific specifications and performance parameters of the product. Product type: It is a line rotor motor, also known as a line motor. Whether variables: this motor is a variable motor, which means that it can adjust flow and pressure to adapt to different loads and working conditions. Rotating direction: OMT 500 151B3005 is a single

Introduction to Danfoss hydraulic motor OMSS315 151F0541 Danfoss is a well-known Danish company specializing in the production of hydraulic systems and components, including hydraulic motors, pumps and valves. The OMSS315 151F0541 is a hydraulic motor manufactured by Danfoss, part of the OMSS family. Product specification Model: OMSS315 151F0541 Rated current: 0.63A Rated voltage: 24V Rated power: 1.8kW Rated speed: 1000rpm Working pressure: 1MPa Structure: plunger type

Danfoss motor OMH200 151H1002 product introduction product description OMH200 151002 is a hydraulic motor produced by Danfoss Danfoss, which belongs to the OMH series. This motor is widely used in various mechanical equipment with its stable performance and reliable quality, such as forklifts, lawn care machinery, high -altitude operating vehicles, rolling machines, harvesters and farming equipment. Features The main features of OMH200 151H1002 Hydraulic motor include: Anti

product description OMPX 315 11186712 is a compact line high -speed motor produced by Danfoss. This motor is favored by the market for its higher torque output and powerful bearing bearing capacity. It is suitable for applications that need to withstand higher radial loads, and the improved shaft seal design helps to extend the service life of the motor. Technical specification Model: OMPX 315 11186712 Type: Placing line motors Geometric displacement: 315cc Maximum speed:

Danfoss motor OMT 315 151B3003 product introduction OMT 315 151B3003 is a hydraulic motor produced by Danish Danfoss. It belongs to the OMT series. The main features of this motor include: Structural form: blade type Type of loading: radial motor Speed ​​type: high -speed motor Work pressure: 50 bar Torque: 5 nm Rated current: 240 A Rated voltage: 230V Rated power: 40 W Rating speed: 600 RPM Customized processing: No Technical specifications Brand Danfoss Type number OMT 315

Danfoss Set Line Motor Product Introduction Product Series Denfoss provides multiple series of line motors, including O series, T series and W series. These series have their own unique characteristics and application scenarios: O series: provides unparalleled flexibility, covering different specifications and load demand, and the pressure is as high as 275 BAR (3,990 PSI). T series: Large -scale wiring motors are suitable for applications such as sliding loading machines,

DANFOSS Swing Motor 530200A5821AAAAAS Product Introduction Danfoss is a well -known Danish company that focuses on manufacturing and sales of high -quality industrial products, including hydraulic motors. Motor motor is a type of hydraulic motor, which is widely used in various industries for its efficient, reliable and durable characteristics. Features High -efficiency performance: Danfoss's line motor has extremely high efficiency throughout the life cycle, which can help

Danfoss Danfoss imported motor OMP400 151-0618 O series, your flexible choice O series has the flexibility. All motors in this series have excellent power, covering different specifications and different needs from medium loads to heavy loads. Its pressure pressure is as high as 275 BAR (3,990 PSI). Stable, reliable, in line with new emission standards. O series characteristics Use the motor of corrosion parts Use the plug -in installation of the flange of the wheel motor Use

Danfoss OMV630 151B3108 Hydraulic motor product introduction The Danfoss OMV630 151B3108 is a hydraulic motor from the Danfoss brand, part of the OMV family. Key features of this motor include: Brand and manufacturer: Produced by the well-known Danish manufacturer Danfoss. Model and series: 630 hydraulic motor belonging to OMV series. Rated parameters: Rated current is 0.63A, rated voltage is 24v, rated power is 1.8kw, rated speed is 10nm, working pressure is 1mpa. Structure:

Danfoss omh400 151H1005 Technical parameters Product name: OMH400 151H-1005 Application field: environmental protection, agriculture, etc. Features: High -speed motors, gear motors have the advantages of small volume, light weight, simple structure, good technique, not sensitive to oil pollution, impact resistance and minimal inertia. Applicable occasions: injection molding machine The rated pressure: 250 bar Torque: 1111 nm Rated current: 1111 A Rated voltage: 2312 V Rated

Danfoss omp50 151-0610 Sub-motor product introduction Model: OMP50 151-0610 is the specific model of the product, which is used to distinguish different product specifications and performance. Structural form: The motor adopts a gear structure, which can usually provide stable transmission efficiency and long service life. Load type: As a line motor, it is designed to withstand specific load types to meet the needs of specific application scenarios. Speed ​​type: The motor is

DANFOSS Swing Motor OMP200 151-0615 Product Introduction product description OMP200 151-0615 is a line motor produced by Danter Danfoss. This motor belongs to the hydraulic motor product line and is widely used in various industrial equipment and machinery, such as ships, snow sweeping vehicles, garbage trucks, and excavators. Technical specification The main technical specifications of the motor are as follows: Brand: Danfoss/Denfoss Model: OMP 200 151-0615 Structural form: