Cable Fault Locator

The XHGX507C1 is a comprehensive pipeline path detection instrument that brings pipeline route detection, cable identification and optional A-frame fault finding together in one tool set. Built around a signal transmitter, a transmitting current clamp, a receiver, a receiving flexible current clamp and a connecting test line, the set traces metal pipelines and buried cables accurately in a trenchless environment, measures depth and displays the running current along the route

XHMR-10KVA Digital Insulation Resistance Tester | Cable Fault Locator XHMR-10KVA is a portable high voltage digital insulation resistance tester (megohmmeter) built to measure the resistance of insulating materials as well as the insulation resistance of transformers, motors, cables and other electrical equipment. With six selectable test voltages up to 10kV, a measurement range of 0.01MΩ to 35TΩ, a step-voltage output function, DAR / PI testing and 500-group on-board storage

XHFZ510-B2 Cable Fault Simulation Device Overview As urbanization accelerates and cities grow larger, the demand for electricity keeps increasing, and the single overhead power line of the past is being replaced by cable lines. For many years, popularizing and training power-cable fault detection personnel has been a difficult problem. To make training run smoothly, our company developed the electrical test simulation training system, which can simulate all types of power

Digital Insulation Resistance Tester | XHMR-10KVB The XHMR-10KVB digital insulation resistance tester, also known as a megohmmeter or high-voltage insulation resistance tester, is designed for insulation resistance testing of transformers, motors, cables and electrical equipment. It offers six rated voltage levels, 250V, 500V, 1000V, 2500V, 5000V and 10kV, with a wide resistance measurement range from 0.01MΩ to 35TΩ, making it one of the most versatile insulation testers

The XHGX507 is a portable cable and pipeline locating instrument that combines underground cable path tracing, depth measurement, cable fault location and loop resistance measurement in one lightweight set. Based on the principle of electromagnetic induction, it applies a signal to the target cable through the transmitter, and uses the receiver to read the signal strength, depth and current above the buried line, so that one operator can complete the whole detection alone.

XHGX507X Cable Pipeline Locator The signal transmission connection mode of the transmitter: direct connection method, coupling method, induction method. Receiver working mode: wave peak method, wave valley method, step voltage method. This XHGX507X underground cable pipe locator uses the electromagnetic field signal of the underground cable to locate the cable, and gives the depth and current readings, so as to realize the cable detection function. Transmitter Features:

XHOW560 Series OWTS Partial Discharge Test System| XZH TEST The XHOW560 Series is an integrated Oscillating Wave Test System (OWTS) engineered for partial discharge (PD) detection, location and insulation diagnosis on 6–35 kV medium-voltage power cables. By applying a damped AC oscillating voltage that reproduces real cable operating conditions, the system excites partial discharge inside hidden insulation defects and then measures both PD intensity and fault position

XHGX507X Cable Pipeline Locator The signal transmission connection mode of the transmitter: direct connection method, coupling method, induction method. Receiver working mode: wave peak method, wave valley method, step voltage method. This XHGX507X underground cable pipe locator uses the electromagnetic field signal of the underground cable to locate the cable, and gives the depth and current readings, so as to realize the cable detection function. Transmitter Features:

XHGX507X Cable Pipeline Locator The signal transmission connection mode of the transmitter: direct connection method, coupling method, induction method. Receiver working mode: wave peak method, wave valley method, step voltage method. This XHGX507X underground cable pipe locator uses the electromagnetic field signal of the underground cable to locate the cable, and gives the depth and current readings, so as to realize the cable detection function. Transmitter Features:

XHGX507X Cable Pipeline Locator The signal transmission connection mode of the transmitter: direct connection method, coupling method, induction method. Receiver working mode: wave peak method, wave valley method, step voltage method. This XHGX507X underground cable pipe locator uses the electromagnetic field signal of the underground cable to locate the cable, and gives the depth and current readings, so as to realize the cable detection function. Transmitter Features:

XHGX507C1 Cable Pipe Locator | Cable Fault Locator XHGX507C1 is a comprehensive underground metal pipeline and cable path detection instrument (cable pipe locator) with strong performance. It provides pipeline path detection, pipeline census, depth measurement, cable identification and fault finding, and consists of a transmitter, a transmitting current clamp, a receiver, a receiving flexible current clamp, a connecting test line and an optional A-frame. It accurately locates

Product Introduction XHGX507 Cable fault comprehensive tester(cable pipeline locator) Description: Our company has long been committed to the research of cable fault testing. The cable fault intelligent tester has been used by thousands of users and has a high reputation in the field of power cable testing. The XHGX507 cable fault comprehensive tester developed by the company using the latest concept is especially suitable for fast and accurate positioning of cable-to-ground

The XHGX507 Pro Underground Cable Fault Pinpointer is an advanced electromagnetic induction-based detection system specialized for cable-to-ground insulation fault pinpointing up to 2MΩ. Equipped with step voltage A-frame detection, dual-frequency transmitter, and large LCD display with voice prompt, it locates buried power and communication cable faults accurately without high-voltage equipment. Supports direct connection, coupling clamp, and induction signal application methods.

Power Cable Fault Locator | XHGX507C1 The XHGX507C1 power cable fault locator is a complete field system for electric power cable maintenance: a 15W high-power transmitter (300V max direct output, 9 adjustable levels) injects a clear tracing signal, while the receiver traces the cable route, measures depth and current in real time, positively identifies the target cable among up to 20 cables, and — with the optional A-frame — pinpoints insulation damage and sheath fault

XHGX507X Cable Pipeline Locator The signal transmission connection mode of the transmitter: direct connection method, coupling method, induction method. Receiver working mode: wave peak method, wave valley method, step voltage method. This XHGX507X underground cable pipe locator uses the electromagnetic field signal of the underground cable to locate the cable, and gives the depth and current readings, so as to realize the cable detection function. Transmitter Features:

XHJS1000R Differ-Frequency Dielectric Loss Tester The XHJS1000R is a high-precision test instrument designed for measuring dielectric loss tangent and capacitance in high-voltage power equipment at power plants and substations. Key Features Integrated structure with built-in dielectric loss test bridge Variable frequency voltage regulator and step-up transformer SF6 high stability standard capacitor included Digital notch technology for power frequency interference eliminatio

Insulation Resistance Tester | 15kV Digital Megohmmeter | DAR PI Insulation Meter The insulation resistance tester—also known as a megohmmeter or high-voltage insulation resistance tester—is used for measuring the insulation resistance of motors, transformers, cables, switchgear and other electrical equipment during preventive maintenance, commissioning and troubleshooting. This digital insulation meter supports insulation resistance test, voltage test, DC current test and

XHGX507C1 Cable Fault Comprehensive Tester — Cable Fault Locator The XHGX507C1 Cable Fault Comprehensive Tester (also known as a pipeline locator or route tracer) is a highly versatile route-detection instrument that combines pipeline route detection, cable identification and fault location. The system consists of a transmitter, a transmitting current clamp, a receiver, a receiving flexible current clamp, connecting test leads and an optional A-frame. It can be used, without

Double-Clamp Phase Voltammeter - The Ultimate Cable Fault Locator for On-Site Inspections The XHXW905 double-clamp phase voltammeter (also known as automatic double-clamp phase voltammeter) is a fully automatic, multi-functional digital instrument specifically designed for on-site testing. This comprehensive upgrade of phase voltammeter technology reduces operational complexity and minimizes potential errors, featuring high precision, stability, low power consumption, and

Transformer Dielectric Loss Tester, 10kV Dielectric Loss 0.5kV~10kV Product Description The XHJS1000R differ-frequency dielectric loss tester is a high-precision instrument designed for testing the dielectric loss tangent and capacitance of high-voltage power equipment in power plants and substations. This integrated unit features a built-in dielectric loss test bridge, variable frequency voltage regulator, step-up transformer, and SF6 high stability standard capacitor. The