High Voltage Surge Generator

Three-voltage high-voltage pulse generator with 2048J discharge energy for underground cable fault pre-location and DC withstand testing. Features three selectable voltage levels, portable integrated design, and dual-mode impulse and DC operation. Ideal for power utility and industrial cable diagnostics.

High Voltage Surge Generator | XHHV515-8L The XHHV515-8L high voltage surge generator is a portable all-in-one device designed for impulse discharge testing during cable fault location and DC withstand voltage testing of electrical equipment rated at 15 kV and below. It fully complies with DL/T846-2016 "General Technical Conditions for High Voltage Test Equipment" and DL/T474-2017 "Implementation Guidelines for Field Insulation Tests", making it an ideal product for power

25kg ultra-light 1225J DC surge generator for 35kV cable fault location and DC testing. 2uF capacitor, short-circuit-proof output, dual 1.5-level metering. Integrates DC source, capacitor, and ball gap into a 25kg unit replacing 100kg+ transformer setups. Zero-start protection with overcurrent, overvoltage, and overtemperature safeguards. DL/T846-2016 and DL/T474-2017 compliant.

XHHV515-8L 高压浪涌发生器 XHHV515-8L 高压冲击发生器符合 DL/T846-2016和 DL/T474-2017标准.它能够产生用于电缆故障测试的高能冲击信号,并对电气设备进行直流耐压试验.该发生器将直流高压源,储能电容器和放电球间隙集成于一台超轻便,人性化的仪器中.工厂维护团队无需再租赁笨重的变压器式系统——这款仅重 25 公斤的发生器即可完成 10kV 及以下工厂电缆网络的日常耐压检查和紧急故障定位. 应用及目标受众: 专为可再生能源工厂(太阳能发电厂和风力发电厂)和大型工业设施(如数据中心,石化厂和制造厂)的电气维护部门而设计,用于维护 10kV 及以下配电电缆,执行直流耐受性验证,并且需要快速脉冲放电来定位电缆故障,以最大限度地减少生产停机时间. 主要规格 范围 规格 冲击电压 0-15千伏 短路电流 0-320mA 内置电容器 8μF 放电功率 0-900J 冲击力 400瓦 直流耐压输出 0-10千伏 输出电压极性 负极性 高压分压器 1.5级 过流保护 8mA(超过4秒) 过温保护 65°C 工作电源 交流电

Portable Power Cable Fault Locator 12kV 864J Surge Generator | XHHV512-12L The XHHV512-12L high voltage surge generator is a portable integrated device primarily designed for impulse discharge in low-voltage cable fault testing of cables with voltage levels of 12 kV and below, and it can also be used for DC withstand voltage testing of other electrical equipment. As a tie-rod portable integrated device, it adopts a humanized design operation mode, high-precision dedicated

High Voltage Surge Generator | Trolley Cable Thumper | XHHV535-4T The XHHV535-4T trolley high voltage surge generator is mainly used for underground cable fault testing of voltage levels of 35kV and below; it can also be used for DC withstand voltage tests of other electrical equipment. The device integrates a DC high-voltage source, an energy storage capacitor, a discharge ball device, an automatic discharge device and a voltage level switching device into one cabinet. It

XHHV535-4TSB is a fully integrated cable fault location system combining a 10.1-inch touchscreen TDR cable fault tester and a 32kV/2048J high-voltage pulse generator on a single ergonomic trolley. Supports low-voltage pulse, high-voltage flashover, and 8-time multi-pulse testing for 35kV and below power cables. Features three-stage voltage/capacitor switching, built-in megohmmeter, and 5-hour battery operation.

Target Application: TDR cable fault test system integrators and equipment rental fleet operators needing a compact 200W DC HV source for integration into mobile test systems — optimized for arc reflection and impulse current methods on multi-service cable fault vans. XHHV508 Series DC High Voltage Power Supply — XHHV508-2 200W The XHHV508 series DC high voltage power supply fully complies with DL/T846 and DL/T474 standards for high voltage test equipment and on-site

2048J three-speed trolley-mounted high-voltage surge generator for precision power cable fault diagnostics and DC withstand testing. Features three selectable voltage and capacitor levels (32kV/4μF, 16kV/16μF, 8kV/64μF) each delivering 2048J discharge energy. Built-in waveform sampling module for direct cable fault tester integration. Tri-mode operation: DC withstand, single manual impulse, and automatic 7-second cycle discharge. Cart-mounted design with 2.5-grade analog metering, auto-discharge safety, and zero-start protection. Designed for utility testing laboratories, cable manufacturer QC departments, and professional engineering consulting firms. Compliant with DL/T846-2016 and DL/T474-2017.