Shoe Making Machine

Characters: 1. Can apply to all styles of edge folding including the glued leather and is suitable for the folding of vamp, insole and the binding of insole. 2.Have the cutting device. 3. The advanced folding mechanism can be adjusted easily,it has neat folding and even width. 4. The width of folding can be adjusted from 3mm to 8mm. 5. Suitable for all sorts of material (synthetic leather, natural leather etc.) 6.Introduction of improved pressure device, easy adjustment. 7

Features: 1. This machine is used for trimming of edge of outsole. suitable for any sole materials. 2. Easy to operate. 3. Low failure rate. 4.This machine has with table or without table.

Features: 1. Can apply to all styles of edge folding including the glued leather and is suitable for the folding of vamp, insole and the binding of insole. 2.Have the cutting device. 3. The advanced folding mechanism can be adjusted easily,it has neat folding and even width. 4. The width of folding can be adjusted from 3mm to 8mm. 5. Suitable for all sorts of material (synthetic leather, natural leather etc.) 6. Introduction of improved pressure device, easy adjustment. 7.

Features: 1. The machine is used to auto cementing folding shoes, leather bag, wallet and phone cover etc.. 2. With the cutting device. 3. The advanced folding mechanism can be adjusted easily, it has neat folding and even width. 4. The width of folding can be adjusted from 3-8mm. 5. Introduction of improved pressure device, easy adjustment. 6. Machine instead of manual, 4-8 times fast.

Features: 1. This machine is used for steam softening of the toe and whole upper, it can making the leather or materials and glue soft and easy to do lasting. 2. The steam can be adjusted to all kinds of shoes.

Features: ▶This machine is applicable to a wide range of shoes suitable for section of the various components. for example: shoe tongue, collar turned mouth,pinna,shoe sole etc. raked with foam inside and outside edge. ▶The advanced design technology, which is make sure apply to the cutting and the beveling of the plane and the edge of the foam, sponge,EVA, Warrior Pad, shoe sole used for the parts of various kinds of the shoes and other products. ▶The machine can be adjusted

Features: 1.This machine is applied to soften and steam shoes upper/lining,warm and steam make shoe upper soften and easy to moulding. 2. The normal temperature is 100-120 degree Celsius and the time is subject to set upon materials, ranging from 10 to 20 seconds. 3. Operator control the machine through the control panel. Up and down press make the vamp inning toe puff and the upper match perfectly. 4. Simple operation: High automation and easy operation, shortening learning

Features: 1.At the bottom of this machine, many pieces of high strength and tenacious block rubber are used, and the pressure can be adjusted automatically. 2.It can automatically adjust according to the shape of the bottom of all kinds of shoes, so that the front and rear are consistent with the inside. No need to pad any material to make the sole match with the shoe last, will not produce any error. 3.The front and rear pressure bar is an automatic cylinder, and the

Features: This machine is heated by electric heating tube cooling water and large tonnage gas liquid pressurization, so that the product melting and bonding, therefore, the welding speed, good stability, the technical requirements of the operation, the hanging of the material mold into the hot plate and so on, and then from the hot plate into the cold press can be shaped, scope of application. TPU of leather fabric can be cut pieces of a variety of patterns paste solid and

​Features: 1. This machine is suitable for leather shoes upper wrinkle removal. 2. The strong osmotic steam spray can soften the upper, blow it with strong hot air, and roll it back and forth with the help of a rolling iron to eliminate the wrinkles on the upper to make it smooth. 3. Scope of application: The Hot Air Blower for Upper is used for leather shoes wrinkle removing. 4. Adopting digital-display and adjustable temperature controller, which sets temperature accurately

Features: It is specially designed for insole nailing, like sports shoes, dress shoes, ladies shoes, boots and so on. 1.First, the mid-sole fixing nails are permanently fixed on the shoe last. When using, the mid-sole only needs to be pressed on the shoe last. After pulling out the last, the mid-sole fixing nails are still kept on the shoe last for repeated use, which avoids the waste of the traditional way and the possibility of the nails remaining on the mid-sole. 2.Shoe