Powerline Tools

Powerline Tools 10kN Cable Grip Steel Wire Puller Cable Puller Tool WLL 1000KG 2000KG Rated load 10KN 20KN Weight 0.8kg 1.6kg Use range transmission and distribution 2.6-16mm strand, bare copper wire. 4-22mm standard transmission and distribution aluminum wire, steel core wire, insulated wire. Package Paper Box Paper Box Cable Wire Gripper Steel Cable Puller Tool The cable grips pulling are made of alloy steel, the structure is compact and strong, special heat treatment,

Powerline Tools Multifunctional Pulling Tightening Tool with Swing Latch WLL 1000KG 2000KG Rated load 10KN 20KN Use range transmission and distribution 2.6-16mm strand, bare copper wire. 4-22mm standard transmission and distribution aluminum wire, steel core wire, insulated wire. Weight 0.8kg 1.6kg Package Paper Box Paper Box The cable grips pulling are made of alloy steel, the structure is compact and strong, special heat treatment, durable, stable, and high strength. With

Powerline Tools Bolted Type Steel Clamp Aluminum Alloy Bolted Type Tension Clamp Technical features: There is no need to cut the wire, and it is fixed with several U-shaped screws, but the grip strength is not as good as the compression type. Product advantages: Installation is easy, there is no need hydraulic equipment; Each type is applicable to a wide range of conductors. Bolted Tension Clamp is used for fixing the terminal of the conductor and ground wire on the tension

Powerline Tools Aluminum Alloy Bolted Type Steel Clamp Bolted Tension Clamp Technical features: There is no need to cut the wire, and it is fixed with several U-shaped screws, but the grip strength is not as good as the compression type. Technical Details Catalog N0. Suitable diameter of Conductor Dimensions Quantity of U bolt Failure load mm mm L1 L2 C M kN P-NLL-1 Φ7.6-Φ16.2 128 105 19 16 2 40 P-NLL-2 Φ8.2-Φ17.0 210 160 22 16 3 70 P-NLL-3 Φ14.1-Φ18.0 220 213 22 16 3 70 P

TYST12 12kN Conductor Lifter For Transmission Line Construction TYST Conductor Lifter Model Rated load (kN) Tray length (mm) Weight (kg) ST8 8 60 0.9 ST12 12 120 2.5 ST25 25 160 7 ST40 40 250 10.5 Model Rated load (KN) Hook groove length (mm) Weight (kg) Remark ST25-2 2X12 120 13 Two bundled Conductors ST50-2 2X25 160 25 Two bundled Conductors ST80-2 2X40 250 40 Two bundled Conductors ST36-3 3X12 120 21 Three bundled Conductors ST75-3 3X25 160 35 Three bundled Conductors

TYSFT1 Three Conductor Bundle Line Cart For Power Line Construction TYSFT1 Bicycle For Three Bundle The Bicycles fitting spacers on three bundled conductor lines is used to mount spacer for 3-bundle conductor of 330KV. By pedalling forward the bicycle moves backward in order to provide the operator with necessary working space. The bicycles are equipped with an additional safety clamp, which brakes directly on the conductor. Model Rated load Conductor size Conductor distance

Professional 30kN rated shackle designed for power line construction applications. Features high strength construction, multiple model options from 10kN to 300kN capacity, and comprehensive technical support. Backed by experienced engineering team and 24-hour customer service for industrial reliability.

Powerline Tools Bolted Type Tension Clamp/Strain Clamp Failure Load 40kN Technical Details Catalog N0. Suitable diameter of Conductor Dimensions Quantity of U bolt Failure load mm mm L1 L2 C M kN P-NLL-1 Φ7.6-Φ16.2 128 105 19 16 2 40 P-NLL-2 Φ8.2-Φ17.0 210 160 22 16 3 70 P-NLL-3 Φ14.1-Φ18.0 220 213 22 16 3 70 P-NLL-4 Φ13.6-*Φ25.0 320 320 30 18 4 90 P-NLL-5 Φ16.0-Φ32.0 380 380 36 22 5 100 P-NLL-6 Φ28.5-Φ46.5 480 480 50 22 6 100 Typical Parameters(Trapezoid structure) Code

Powerline Tools Pro3000 Analog Probe Filter and Analog Tone Generator Stop the Buzz. Find Cables Faster with Clear, Precise Toning • Clear - Innovative filter technology blocks interference (“buzz") that makes tracing difficult (T** models only) • Precise - SmartTone™ technology provides five distinct tones for exact pair identification • Sends loud tone up to 10 miles (16 kilometers) on most cables • Loud speaker on probe makes the tone easier to hear through drywall, wood,

Powerline Tools TYTFX-10 Rope Pulling Hoist Tirfor Hand Winch TYTFX Rope Pulling Hoist This is designed to pull or lift ropes, conductors or loads. Model Lifting capacity (kN) Pulling capacity (kN) Rope diameter (mm) Rope length (m) Mass (kg) TFX-8 8 12.5 8 20 6 TFX-10 10 15 8 20 6 TFX-16 16 25 11 20 12 TFX-32 32 50 16 10 23 TFX-54 54 80 20 10 45 Here is a selection of the many applications. Construction,public works,civil engineering moving and positioning form work

Powerline Tools TYTFX Rope Pulling Hoist to Pull or Lift Ropes TYTFX Rope Pulling Hoist This is designed to pull or lift ropes, conductors or loads. Model Lifting capacity (kN) Pulling capacity (kN) Rope diameter (mm) Rope length (m) Mass (kg) TFX-8 8 12.5 8 20 6 TFX-10 10 15 8 20 6 TFX-16 16 25 11 20 12 TFX-32 32 50 16 10 23 TFX-54 54 80 20 10 45 ADVANTAGES OF THE WIRE ROPE HOIST Simple structure and powerful function Fast and easy installation, Simple to feed in or remove

Powerline Tools TYSZ Head Boards One Rope Pulling Two Conductors TYSZ Head Boards The head board is designed to connect the pulling rope (max 28mm) with 2 to 5 bundled conductors. Special models with different characteristics can be designed according to customer's needs. Model Description Rated load (kN) Weight (kg) Pulley wheel width (mm) Remark SZ2-6-75 One rope pulling two conductors 60 12.5 75 Conductor separated SZ2-8-100 One rope pulling two conductors 80 17 100 SZ2-13

Powerline Tools Rated Load 20kN Swivel Joints Mount On Thrust Bearings TYSLX Swivel Joints The swivel joints are suitable to connect the pulling rope to the mesh sock joint mounted on the conductor, they are mounted on thrust bearings and they are designed to avoid torsion stain accumulation. They are made of highly tensile galvanized steel, the special design can bear the high radial loads, which occur during the passage over the pulleys. Model Dimensions (mm) Weight Rated

TYSLX Powerline Tools Highly Tensile Galvanized Steel Swivel Joints TYSLX Swivel Joints The swivel joints are suitable to connect the pulling rope to the mesh sock joint mounted on the conductor, they are mounted on thrust bearings and they are designed to avoid torsion stain accumulation. They are made of highly tensile galvanized steel, the special design can bear the high radial loads, which occur during the passage over the pulleys. Model Dimensions (mm) Rated load Weight

TYSLWS Double Head Type Temporary Mesh Sock Joints For Power Line Construction TYSLW Temporary Mesh Sock Joints DOUBLE HEAD TYPE The double head type temporary mesh sock joints are specifically designed to temporarily connect the aluminum, steel, or copper conductor to the pulling rope. They consist of variable pitch steel wires, which effectively distribute the gripping effect on the conductor. Model Conductor size (mm2) OPGW Dia.(mm) Rated load (kN) Breaking load (kN) SLW-1

Powerline Tools TYSLW-1 One Head Type Temporary Mesh Sock Joints TYSLW Temporary Mesh Sock Joints ONE HEAD TYPE The one head type temporary mesh sock joints are specifically designed to temporarily connect the aluminum, steel, or copper conductor to the pulling rope. They consist of variable pitch steel wires, which effectively distribute the gripping effect on the conductor. Model Conductor size (mm2) OPGW Dia.(mm) Rated load (kN) Breaking load (kN) SLW-1 25-70 6-11 10 20

Powerline Tools SLU-5 Rated Load 50kN Galvanized Steel Connectors TYSLU Connectors The connectors are specifically designed to connect pilot rope lengths or pulling rope lengths and to pass over the puller bull wheels. They are made of highly tensile galvanized steel. Model Dimensions Weight Rated load A B C d D E mm kg kN SLU-1 36 68 18 10 14 29 0.2 10 SLU-3 37 76 20 12 17 31 0.22 30 SLU-5 50 96 23 18 19 42 0.6 50 SLU-8 56 110 28 20 22 50 0.8 80 SLU-10 59 126 30 22 26 54 1.2

Powerline Tools TYSLU-3 30kN Connectors Connect Pilot Rope Lengths TYSLU Connectors The connectors are specifically designed to connect pilot rope lengths or pulling rope lengths and to pass over the puller bull wheels. They are made of highly tensile galvanized steel. Model Dimensions Rated load Weight A B C d D E mm kN kg SLU-1 36 68 18 10 14 29 10 0.2 SLU-3 37 76 20 12 17 31 30 0.22 SLU-5 50 96 23 18 19 42 50 0.6 SLU-8 56 110 28 20 22 50 80 0.8 SLU-10 59 126 30 22 26 54

Powerline Tools TYSLU Highly Tensile Galvanized Steel Connectors TYSLU ConnectorsThe connectors are specifically designed to connect pilot rope lengths or pulling rope lengths and to pass over the puller bull wheels. They are made of highly tensile galvanized steel.ModelDimensions (mm)Rated loadWeightABCdDE(kN)(kg)SLU-1366818101429100.2SLU-3377620121731300.22SLU-5509623181942500.6SLU-85611028202250800.8SLU-1059126302226541001.2SLU-1361134322427561301.3SLU-1563138372728581501

Powerline Tools TYSKJL-2 Hot Forged Steel Self Gripping Clamps General Clamp TYSKJL Self Gripping Clamps The self-gripping clamps can be use to anchor and to string rope. The body is made of high strength hot forged steel in order to minimize the ratio between weight and working load. Model Rated load(kn) Apply range(mm) Weight(kg) Remark SKJL-2 20 Φ4-22 1.3 Steel cable; conductor SKJL-3 30 Φ16-32 2.5 Copper wire; Aluminum steel; LGJ; Insulated overhead line Training courses