Bus Spares Parts

This genuine bus and coach wiper motor ZD2832 and ZD1832 features an aluminum alloy shell with IP67 waterproof protection and 30-minute water immersion capability. ISO 9001 certified, it ensures reliable windshield wiping in all weather conditions. A durable bus spare part for fleet driver visibility and safety.

This bus high-strength steel leaf spring suspension bolt features HRC30-45 hardness with hexagonal head for easy operation. Available in 24x400 to 27x405mm sizes with corresponding specification nuts, it ensures secure leaf spring mounting. A durable bus spare part for fleet suspension system integrity.

This Yutong bus oil seal seat ring 220307A is manufactured from high-hardness alloy cast iron with 1000-hour salt spray certification. Operating at dynamic seal pressures of 0.2-0.5MPa across an extreme -40C to 150C temperature range, this OEM replacement component ensures reliable oil sealing for extended bus drivetrain service life.

This ConMet PreSet Plus maintenance-free wheel hub 3104-01467 features a transparent window for easy oil level visibility and a ventilation plug for pressure equalization. Compatible with various commercial bus models and following strict industry standards, each component is designed for easy maintainability. A reliable bus spare part for extended wheel-end service intervals.

This genuine MK3 gear shift control mechanism features dual-cable synchronized push-pull transmission with manual override mechanical operation for King Long and Yutong buses. Low-friction coefficient wear-resistant design ensures smooth shifting across wide temperature ranges. A quality bus spare part for precise and reliable gear selection in fleet operations.

This high durability heater hose features IPX8 water resistance with high-strength fiber woven reinforcement for bus liquid heater systems. Designed for warm water pump variable flow applications, it ensures reliable coolant circulation for cabin heating. A quality bus spare part for cold-weather fleet passenger comfort.

This TCM 4306473 ETC2008A02 transmission control module manages Fuller AMT gear shifting for Higer and King Long buses with millisecond-level response. IP67-rated with EMC anti-interference design, it communicates via CAN bus interface with built-in self-diagnostic fault detection. Operating from -40C to 85C with original factory process quality, this robust module ensures precise and reliable automated transmission performance.

Manufactured with 304 stainless steel stamping valve body, this pneumatic door solenoid valve 6100-06088 and 6108-01640 features dual-coil control with CLASS 5 electromagnetic rating for Jinlong, Yutong, and Zhongtong buses. Tested through 10-500Hz swept-frequency vibration and delivering over 500000 cycles lifespan, it operates reliably from -40C to 85C for demanding bus door applications.

These Yutong bus rear wheel hub oil seals 3104-00669 and 3104-00670 feature a double-lip design with the main lip preventing oil leakage and the secondary lip blocking contaminants. The lightweight hollow framework and anti-error end face design ensure correct installation and long-life rubber formulation delivers extended maintenance intervals for fleet reliability.

This genuine 150W ZD2735 wiper motor features a double gear reduction system with nano ceramic coating for Yutong and Higer buses. 100000 cycle loop tested with automatic reset overload protection system, it ensures durable and reliable windshield wiping. A quality bus spare part for maintaining visibility in all weather fleet operations.

This JAC truck stabilizer bar ball joint measures 23.5xM20 with bolted and spherical hinged connection. ISO 9227 CASS cycle salt spray tested and Paris Formula D-level fatigue crack certified, it ensures reliable anti-roll bar linkage. A durable spare part for JAC truck suspension system stability.

This bus handbrake air pressure sensor and switch 483050013 features an aluminum alloy shell with 0.53 bar threshold for air reservoir pressure alarm. 1 million cycle tested, it ensures reliable handbrake system pressure monitoring. A quality bus spare part for fleet parking brake safety compliance.

This 3774-00211 combination switch provides multifunctional control for Jinlong and Yutong bus lighting, windshield wipers, and steering systems. IP67-rated with flame-retardant engineering plastic construction, it operates on 24V DC with 15A rated contact current and 0.5mm trip accuracy. Delivering over 600000 mechanical cycles at 300MPa tensile strength and 105% IACS conductivity, this switch ensures long-term reliability in demanding bus cabin environments.

This universal brake fluid reservoir is designed for bus and truck hydraulic brake systems, providing reliable brake fluid storage and supply. Compatible with various commercial vehicle models, it ensures consistent hydraulic pressure for braking systems. A practical spare part for fleet brake system maintenance and fluid management.

This King Long bus engine door pump ball head 6206-00143 is built from high-quality metal with a 20mm installation thread and simple maintenance-friendly structure. The anti-fatigue design withstands long-term vibration and impact in engine door applications. Its exquisite appearance and reliable construction make it an essential bus spare part for King Long fleet engine access systems.

This Golden Dragon touring coach thrust rod JR03-120644-07 features a rubber ball joint design with bolt installation for suspension systems. Rated for 100000 kilometers of service life, it handles rated load capacity with reliable damping performance. An essential bus spare part for maintaining stable and comfortable ride quality in touring coach applications.

This North Neoplan bus stabilizer bar link ball joint PN WSB610060373 features an integrally forged ball pin with double-layer fluororubber dust-proof seal. 2 million cycle fatigue tested with 10-2000Hz sine vibration certification, it ensures reliable anti-roll bar linkage. A durable bus spare part for fleet suspension stability.

Equipped with CREE XHP50.2 LED chips, these IP67-rated fog lights deliver superior visibility for Higer and Yutong buses across -40C to 85C temperatures. H11 standard lamp holder enables quick installation with startup under 0.1 seconds. Superior thermal management at 1.5K/W and over 99% stroboscopic suppression ensure flicker-free illumination. Part numbers 4116-00268 and 4116-00267 cover multiple bus models for reliable fleet lighting.

This ConMet rear wheel hub oil seal 3103-00933 for Yutong buses features NBR material with maintenance-free design, optimized for thermal dissipation and compatible with ConMet axles using GL-5 gear oil lubrication. Resistant to extreme temperatures from -40C to 150C, it delivers dependable sealing performance backed by a 3-year or 500000km quality guarantee. An essential bus spare part for long-haul fleet reliability.

This custom molded engine hose 1303-00074 is precision-designed using CNC 3D scanning and modeling for Yutong and King Long buses. The quick-connect metal joints support arbitrary bending radii with 1-100um filtration accuracy. Withstanding temperatures from -40C to 120C and pressures up to 0.6MPa, this hose delivers reliable fluid transfer in demanding bus engine applications.