Ultrasonic Flaw Detector

Introduction This instrument is a portable industrial digital ultrasonic flaw detector that can quickly, easily, accurately and non‑destructively detect, locate, evaluate and diagnose various defects in workpieces, including cracks, inclusions, voids, and other discontinuities. Suitable for both laboratory and on‑site engineering applications, it is widely used in manufacturing, iron and steel metallurgy, metal processing, chemical industry, and other fields requiring defect

Ultrasonic Automatic Flaw Detection Dual-Crystal Immersion Probe Specifications: 5MHz F10 Frequency: 5MHz Crystal Size: 10*20 mm Socket Model: Dual Q9 Housing Material: Stainless Steel/Copper Immersion probes are typically used in semi-automatic or automated flaw detection systems. The workpiece and probe are immersed in water, maintaining a certain distance between the probe and the workpiece's inspection surface due to "water delay." The probe does not directly contact the

Ultrasonic immersion focusing probe Immersion probes are typically used in semi-automatic or automated flaw detection systems. The workpiece and probe are immersed in water, maintaining a certain distance between the probe and the workpiece's inspection surface due to "water delay." The probe does not directly contact the workpiece, thus enabling flaw detection of irregularly shaped, geometrically complex, or rough-surfaced workpieces. When the probe's emitted sound beam axis

High Sensitivity Dual Crystal Straight Probe - Ultrasonic Flaw Detector Sensor for Metal Casting & Forging Defect Detection Dual-crystal straight probe: Employs a dual-crystal focusing method to enhance defect detection capabilities. The dual-straight/dual-angle ultrasonic probe series mainly includes: straight probes, angle probes, probes with curvature, focusing probes, surface wave probes, water immersion probes, dual-crystal probes, thickness gauge probes, and high

Ultrasonic Pulser Receiver For Non-destructive Testing Parameters Control Parameters Range Stepping Transmitting Area Transmitting Voltage 60V, 110V, 150V, 200V Chose Pulse Width 1~40(one time is approximately 28ns) One Time Repetition Rate (Internal Trigger) 4Hz, 8Hz, 16Hz, 20Hz, 100Hz, 500Hz, 1kHz, 2kHz Chose Trigger Source Internal Trigger, External Trigger Chose Receiving Area Single/ Dual crystal Single Crystal(1T/1R), Dual Crystal(1T/2R) Chose Damping 34Ω, 50Ω, 90Ω, 510

BNC LEMO Microdot Subvis Ultrasonic Probe Cable for Ultrasonic Flaw Detector BNC-BNC, LEMO 00-LEMO 01, BNC-LEMO 00, BNC-MICRODOT

TESTECH NDT Testing UT Calibration Block V1 V2 Ultrasonic Test Blocks for Flaw Detector Carbon Steel Order Code Type Description/Application Standard Made To Material Size V1 A2(BS) I.I.W Calibration Standard. Calibration of Shear and compression wave probes. Checking beam angle, emergent point and resolution.Calibration of time base and gain settings. B.S. 2704DIN 54120IIW (International Institute of Welding) Steel25x100x300mm V1/50 A2(BS) Generally as V1. Thicker block