Fire Testing Equipment

one Scope of application A method used to determine the fire response performance of building materials or products (excluding floor coverings and products referred to in EC Resolution 2000/147/EC) in a single burning test (SBI). Ii. Compliance with Standards It complies with the requirements of the GB/T 20284-2006 standard "Test for Single Burning of Building Materials or Products" and the EN13823 test standard "Test Method for Single Burning (SBI)". Iii. Performance

. Scope of Application: It is applicable to the assessment of the maximum service temperature of thermal insulation products such as loosely filled thermal insulation materials, felts, blankets, blocks, boards and prefabricated thermal insulation pipe shells. 2. Compliance with standards: In compliance with the relevant standards of GB/T17430-2015 "Evaluation Method for the Maximum Service Temperature of Thermal Insulation Materials", non-equivalent: ASTM C411-82 "Test Method

Scope of application: It is applicable to fire resistance tests of building components and the fire resistance performance of load-bearing vertical partition components. Working voltage: AC 380V±10% 50NZ. The furnace body: The test furnace passage is composed of bricks, steel structures and fireproof and heat-insulating materials. Sample size: 300mm wide × 300mm high (customizable). The dimensions inside the furnace are approximately: Vertical furnace: L3.2m×W2.2m×H4.0m

Execution standard: Complies with GB/T8626-2007 "Test Method for Flammability of Building Materials" GB/T10801.2-2002 "Extruded Polystyrene Foam (XPS) for Thermal Insulation" Scope of application: Mainly applicable to the test method for determining whether building materials have flammability under specified conditions. Technical parameters The dimensions inside the combustion box are: width 700× depth 400× height 810mm 2. Material: Mirror-finish stainless steel 3. The

Compliance with standards: Complies with the test standards of GB8625 and DIN4102 "Test Method for Flame Retardancy of Building Materials". Scope of application: It is mainly applicable to determining whether building materials are flame-retardant under specified conditions. Any material that has passed the combustion shaft furnace test and the flammability test of building materials can be classified as flame-retardant building materials. Technical parameters Combustion

Scope of application: This test method for assessing the flame resistance characteristics of decorative fireproof coatings applied to the surface of combustible substrates under specified conditions is also applicable to the determination of the flame resistance time of decorative fireproof coatings Compliance with standards: Complies with the test standard requirements of GB/T 12441-2005(Appendix A). Main parameters Test station: 1 station Temperature uniformity: ±2.5℃

Product Introduction The radiation plate flame spread tester uses a gas thermal radiation plate to test the flammability of building surface materials (ASTM E162) and foam plastics (ASTM D3675). The flame spread index (IS) is determined by factors such as flame spread and heat dissipation. It is regarded as an essential parameter in many industry norms, especially for public transportation (trains and buses). Data collection and analysis are all automatically completed by the