Flammability Testing Equipment

Introduction: The performance requirements of this testing machine include fire resistance test, water spray fire resistance test, and mechanical fire resistance test. It is suitable for mineral insulated cables with a rated voltage not exceeding 450/750V, and can maintain circuit integrity for a long time under flame conditions. Compliant with standards: Complies with the test standard requirements of the British Fire resistant Cable Standard BS6387 "Specification for

Scope of application It is mainly applicable to the inspection of the combustion quality loss rate and flame burning time of interior decoration wood boards and wood products (d≤20mm) that have undergone flame-retardant impregnation treatment under specified combustion conditions. Compliant with standards It was developed in accordance with the technical parameters stipulated in GA/T42.2-92. Main parameters Ambient temperature: -5℃ to 30℃ Environmental humidity: ≤70% Working

Scope of application It is applicable to the inspection of the combustion quality loss rate and flame burning time of various actual used woods in production and engineering with a thickness of more than 20mm after flame-retardant impregnation treatment under specified combustion conditions. This machine is equipped with automatic ignition, automatic timing and automatic reset functions. The burner is composed of a 50mm diameter nozzle, a regulating valve and a switch valve

Meet the standards: in line with GB8410, American Standard FMVSS571.302, DIN7520 "Combustion Characteristics of Automotive Interior Materials". Test method: the specimen is clamped horizontally on the U-shaped support, and after igniting the free end of the specimen with a flame of the specified height in the combustion chamber for 15S, determine whether the flame on the specimen is extinguished, as well as the distance of the specimen burning and the time taken to burn the

Testing Machine Standard: GB 1094.11-2007. Power dry-type transformer combustion performance testing device combustion testing machine 1, Purpose: Used for measuring the combustion performance test of dry-type transformers in accordance with GB 1094.11-2007 "Dry type Transformers" for Class F1 dry-type transformers. 2, Functional requirements: The function meets the requirements of the 28.3 F1 level dry-type transformer combustion performance test in GB 1094.11-2007 "Power

FAA FAR 25.853 Vertical Flammability Chamber Stainless Steel Adjustable Standard:FAA FAR 25.853 Main Function:Determination of the combustion performance of non-metallic materials used in civil aircraft cabin, the airworthiness identification of non-metallic materials in the cabin. Test type: horizontal test, vertical test, 45-degree tilt combustion test, 60-degree tilt combustion test. Meet the standard: Conform to the FAA. FAR. 25.853 the airline regulations - transport

Overview In order to meet the requirements of production processes and energy conservation and emission reduction, improve working conditions, enhance economic benefits, and ensure the quality of thermal insulation engineering design, pump equipment is designed in accordance with the GB 50264-2013 standard. This equipment is suitable for measuring the heat loss of thermal insulation materials on the outer surface of industrial equipment and pipelines with temperatures ranging

Applicable scope: Suitable for testing flooring materials placed horizontally with small flames ignited under specified conditions and exposed to inclined thermal radiation fields. Suitable for various paving materials. For example, textiles, carpets, cork boards, wooden boards, rubber boards, plastic flooring, and floor spray materials. This device can reflect the combustion performance of the flooring material, including the substrate used. Changes in the backing material,

Standard Introduction JIS K 7201-3 specifies the method for determining the minimum oxygen concentration in a mixed gas of oxygen and nitrogen when the vertical small sample is maintained in combustion at a temperature of 25 ° C - 150 ° C and under specified test conditions. JIS K 7201-3 is applicable to rod or sheet materials that can stand independently at the test temperature and have a thickness of up to 10.5mm. Scope of application JIS K 7201-3 is applicable to solid