Rubber Testing Equipment

The cardboard compression testing machine is suitable for testing the mechanical properties of metal and non-metal materials such as tension, compression, bending, shear, tearing, peeling, and puncture. It can also perform automatic control tests of constant velocity loading, constant velocity deformation, and constant velocity displacement, and has the functions of low cycle load cycle, deformation cycle, and displacement cycle. Calculate indicators such as elongation,

The cardboard compression testing machine is suitable for testing the mechanical properties of metal and non-metal materials such as tension, compression, bending, shear, tearing, peeling, and puncture. It can also perform automatic control tests of constant velocity loading, constant velocity deformation, and constant velocity displacement, and has the functions of low cycle load cycle, deformation cycle, and displacement cycle. Calculate indicators such as elongation,

1, Characteristics and uses of Akron abrasion machine:The Akron abrasion machine is used to determine the wear resistance of vulcanized rubber. The wear volume of the sample is measured by friction between the sample and the grinding wheel at a certain inclination angle and under a certain load within a certain mileage. Meets the requirements of standards such as GB/T1689 "Determination of Wear Resistance of Vulcanized Rubber". Digital setting, display of wear frequency,

1, Overview:This machine is widely used in rubber, plastic, leather, wire, cable, scientific research and other units, and is an indispensable equipment for preparing test pieces This machine can cut various test pieces with a Shore hardness greater than 40 degrees and a thickness of 1-12 millimeters The surface of the sliced material is smooth and even; The thickness dimension tolerance can be controlled within ± 0.2; Samples can be cut directly without polishing2, Technical

The compression cold resistance coefficient tester is used to determine the compression cold resistance coefficient of vulcanized rubber, and is suitable for measuring the low-temperature performance of rubber products that bear the functions of shock absorption, sealing, buffering, etc. under long-term low-temperature compression. It meets the requirements of GB/T6034 standard.Technical Specifications:Measuring the self weight of the component: 200g ± 20gRange of dial gauge:

Bag filter is a new type of dust removal equipment, which has the characteristics of beautiful appearance, low noise, easy use, light weight, and high purification efficiency. It is widely used in rubber, ceramic, machinery, casting, electroplating and leather industries to purify the air containing dry and fine dust Specially suitable for ventilation and dust removal of equipment such as rubber grinding and grinding machines, casting processing machines, etc.Main technical

The roller type wear testing machine mainly consists of a power system, a rotating roller, a sample gripper, an automatic shutdown system, a rack and pinion gear device for sample rotation, a base, and a dust collector. The main principle is: under a certain load, on a certain level of gauze, a cylindrical sample is cross cut and ground on the surface of the gauze for a certain stroke. The mass wear of the sample is measured, and the volume wear is calculated from the density

The plastic ball indentation hardness tester is designed and manufactured according to GB3398-82 and DIN53-456 standards, and meets the requirements of ISO2039 standard. It can be used to determine the hardness of automotive engineering plastics ABS and other plastics used in various industries. This instrument measures the ability of polymer materials to resist being pressed in by another rigid object that is considered to have no elastic deformation. This machine is

Characteristics and Applications of RH-6002 Electrical Conduit Bending Tester: This testing machine is suitable for bending tests of insulation electrical conduit and other materials, with a total bending angle of 180 degrees. After the test, observe whether the sample has cracks. Meets the requirements of GB/T14823.2 "Special Requirements for Electrical Installation Conduits - Rigid Insulated Material Flat Conduits", JG/T "Insulated Electrical Conduits and Accessories for

Characteristics and Applications of Pipe Pressure Testing Machine:This testing machine is specifically designed for water pressure testing of plastic pipes. The testing machine consists of an electric pressure test pump, pipe connection device, etc. It can test GB/T6111 "Determination of resistance time of thermoplastic pipes under long-term constant internal pressure", GB/T10002.1 "Polyvinyl chloride (PVC-u) pipes for water supply", GB/T4219 "Hard polyethylene pipes for

OverviewThis machine can set the number of bending times and display the numbers directly. It is a dual column rubber cracking fatigue testing machine, suitable for rubber factories and research institutions to inspect the fatigue cracking degree of various rubbers.2, Main technical specifications1. Lower gripper reciprocating frequency: 300 ± 10 times/min2. Adjustable distance of upper and lower clamps: 200mm3. Adjustable distance of eccentric wheel: 50mm4. Lower gripper

The compressive stress relaxation instrument is used to determine the compressive stress relaxation performance of vulcanized rubber, especially suitable for the application research of rubber products as sealing materials. It meets the requirements of standards such as GB1685 "Determination of compressive stress relaxation of vulcanized rubber at room temperature and high temperature" and GB/T13643 "Determination of compressive stress relaxation of vulcanized rubber or

Rubber and plastic density meter is used to measure the density of rubber, plastic or similar materials. It can be directly read, eliminating the need for weighing and calculation. It is simple to use, easy to operate, and suitable for rapid determination of process in production workshops and research departments. Complies with HG4-1468 "Rubber Density Determination Method (Direct Reading Method)" and "Plastic Density and Relative Density Test Method".Technical Specification

The plasticity testing machine is suitable for determining the plasticity of raw rubber, plain rubber, and mixed rubber. The rubber sample is placed between smooth surfaces of a pressure hammer, compressed for a certain period of time at a certain temperature and load, and the height change of the sample before and after the experiment is measured. The size of deformation of the sample is called the plasticity of the rubber sample. Adopting high-precision temperature control

Measurement range: 0-30mVMeasurement accuracy: 0.3%Display accuracy: 0.01mVAdjustable range of alarm threshold: 0-30mV (adjustable alarm time)Alarm response time: within 200msPower supply: 220V, 50HZPower: 0.2KW

I. Purpose The high voltage leakage spark test machine is suitable for conducting tests on electrical products, household appliances and their materials regarding their resistance to electrical scarring and erosion. It simulates the process under industrial frequency (48Hz - 62Hz, using liquid contaminants and inclined test samples, through the measurement of electrical scarring and erosion to evaluate the electrical scarring and erosion grades of electrical insulating

Details of the pants tearing cutter:Dumbbell Type I cutting knife Dumbbell Type II cutting knife Dumbbell Type IV cutting knife Dumbbell Type V cutting knifeDumbbell cutter: Type I 6x115 Type II 4x75 Type III 2x35 Type IV 4x50 Type V 10x110Common plastic and rubber cutters:1. 3 × 100 plastic film, tube dumbbell cutter2. 4 × 75 rubber wire and cable dumbbell cutter3 4 × 50 rubber wire and cable dumbbell cutter4. 5 × 56 molded, resin dumbbell cutter5. 6 × 115 rubber and plastic

The notch prototype is a sampling equipment used in the impact toughness testing of non-metallic materials by cantilever beam and simply supported beam impact testing machines. This equipment can be used in laboratories of scientific research institutions, universities, non-metallic material production plants, and other units to produce notch samples. The technical parameters of the machine comply with the requirements specified in ISO179-1993, ISO180-1993, GB/T1043, and GB

I. Comprehensive Specification of Plant Design Project Name: 10.8 m³ Vertical Test Furnace Control System Project Scope: ⑴ Basic design of test furnace main body (to be completed by Party A); ⑵ Fabrication and installation of main plant assembly; ⑶ Installation of plant electrical control system and installation of industrial control software; ⑷ Installation of plant combustion system; ⑸ Installation of plant air‑supply, exhaust‑ventilation and flue‑gas exhausting systems; ⑹

This machine complies with EN ISO 12543‑4:2011 standard. ApplicationThis equipment is mainly used for UV aging test of laminated glass. Detailed Technical ParametersWork chamber dimension: 1100mm × 1100mm × 1000mmSpecimen test size: 300mm × 300mmTest specimen quantity: 9 pcsSample surface temperature control range: 45 ℃ ± 5 ℃Light source: OSRAM Ultra Vitalux 300W (domestic alternative available)Quantity of UV lamps: 16 pcsTotal radiation intensity on specimen surface: 900 W/m