Industrial Automation Equipment

Three comprehensive test chamber Control mode and characteristics: The system is designed with international JTM specifications, temperature and humidity control system, and is controlled by P.I.D.+SSR mode, which can be used stably for a long time. The system complies with MIL STD, GB, JIS, JEDEC, IEC and other test specifications. 1. Performance: 1.1 Temperature range: -40~150°C 1.2 Temperature control stability: 0.5°C 1.3 Temperature deviation: 2.0°C 1.4 Temperature change

Overview In order to meet the requirements of production processes and energy conservation and emission reduction, improve working conditions, enhance economic benefits, and ensure the quality of thermal insulation engineering design, pump equipment is designed in accordance with the GB 50264-2013 standard. This equipment is suitable for measuring the heat loss of thermal insulation materials on the outer surface of industrial equipment and pipelines with temperatures ranging

The main technical parameters: 1. Heating plate: made of SUS304 stainless steel, with a test area of 900*450mm, surrounded by a protective layer, and a width of 80mm. On the lower surface of the heating plate, there rare no less than five thermocouples to determine its surface temperature, four of which are fixed on the diagonal of the heating area of the heating plate and are 150mm away from each corner, and the fifth thermocouple is placed in the center of the heating plate

Equipment use: It is mainly used to test the airtightness, watertightness and compressive deformation resistance of building doors and windows. Conform to the standard: in line with GB/T 7106-2019 "Detection method for airtightness, watertightness and wind pressure resistance of external doors and windows of buildings". Technical Parameters: 1 Wind pressure resistance: static pressure difference: ≥±5000pa Accuracy: ≤2% Wireless displacement: 0~50mm Displacement: ±0.1mm 2. Air

Equipment parameters: Type Single-sided water curtain type Internal dimensions of the device W1500XD1200XH1800mm(height including pool) Equipment dimensions (approx.) W1500XD1400XH2250mm (height excluding fan) Pool plates The national standard 1.2mm cold-rolled steel plate is hydraulic welded, and the height of the pool is about: 300mm Side panels The national standard 1.2mm cold-rolled steel plate is hydraulicly formed, and the height of the side plate is about: 2400mm Roof

Specification Equipment Overview: Experimental analysis of silicone rubber corona aging, research on AC/DC corona aging characteristics, composite insulator material corona aging experimental equipment, organic insulation material corona aging test system, corona aging test box system,Suitable for scientific research institutions, the developed solid insulation material corona aging resistance testing system can achieve different corona test conditions, and can simultaneously

Specification Product name: CF9246 Automatic weighing machine for packaged food Application: It is suitable to check weight of various products, over or less weight will be rejected out, qualify bags will be passed to next equipment. Features: 1. PLC and 7" touch screen, more stability and easier to operate; 2. Apply HBM load cell ensure high accuracy and stability (original from Germany); 3. Solid SUS304 structure ensure stable performance and precise weighing; 4.

Product Description Specification Scope and object This part of IEC 61730 describes the testing requirements for photovoltaic (PV) modules in order to provide safe electrical and mechanical operation during their expected lifetime. Specific topics are provided to assess the prevention of electrical shock, fire hazards, and personal injury due to mechanical and environmental stresses. IEC 61730-1 pertains to the particular requirements of construction. This part of IEC 61730

Mask Respiratory Resistance Tester Functional Features Features: 1. The instrument is composed of an air source that can adjust the flow rate, a human head mold specified in the standard, two sets of inhalation and exhalation pipeline systems, and a breathing resistance measurement system. 2. The flow sensor has high sensitivity and a very small starting flow. 3. The flow sensor chip adopts a thermal mass flowmeter, which does not require temperature and pressure compensation

Specification EN 17092-1 Test Equipment Overview: Impact abrasion resistance: Used to test the impact friction performance of protective clothing for motorcycle drivers. This test simulates the stress that is placed on the protective garments when worn by an average rider (with a body mass of 75kg and a height of 1.75m), when sliding from variable initial speeds to standstill on a real concrete road surface. All removable liners (for example, waterproof or thermal) are

Specification Product name: Intelligent touch screen coin-operated automatic cotton candy vending machine Applicable Industries: Hotels, Restaurant, Home Use, Retail, Food Shop, Food & Beverage Shops, etc Application fields: Commercial catering, Snack food factory Parameters: Showroom Location: None Video outgoing-inspection: Provided Machinery Test Report: Provided Marketing Type: New Product in 2020 Warranty of core components: Not Available Core Components: Engine Place of

Specification Product name: Umbrella continuous opening and closing life testing machine Overview: The umbrella opening and closing life testing machine is one of the umbrella testing machine series. This machine uses a cylinder to expand and contract to simulate the manual opening and closing of the umbrella. The cylinder drives to tighten the umbrella rod, and detects whether the umbrella will be damaged (switch failure). Umbrella disk defect, spring failure, umbrella

IEC61215 Photovoltaic Modules UV Pretreatment Testing Equipment Lab Standards Tester IEC61646 IEC61215 Standard : The equipment is mainly used for: IEC61215, IEC61646 ultraviolet pretreatment test and various test requirements of bypass diode. Keyword: Photovoltaic Modules IEC61215 Standards Testing IEC61215 Solar Panel Hail Impigement Testing Machine UV aging Climatic Chamber UV age environment testing chamber Solar panel testing machine with IEC61215 testing IEC61215 UV

Specification Introduction: Used to a variety of metal materials, tensile, compression, bending, shearing accompanied by increased shear test can be done, can be used as plastic, concrete, cement and other non-metallic materials, compression tests, with simple accessories to complete the chain tape , wire, welding rod, tile's wide range of performance tests and components.This machine adopt under the fuel tank-mounted machine, low profile, light weight, especially for the

Specification Machine summary: High Pressure Heat Steam Aging Test Chamber is a new type of electromechanical integration equipment. The mechanical body is a pressure vessel, it is strictly designed and manufactured according to GB150-1998 All the points which directly contact with sterilized item, are made by high quality stainless steel. Safe and pollution-free, short sterilizing time, easy operation, powerful function and reliable. Application: High Pressure Heat Steam

Specification Product Overview: The instrument uses an electric loading system to load uniformly. It is widely used in ceramic tubes, glazed tiles, building and sanitary ceramics, electric porcelain, household ceramics, refractory materials, etc. For the determination of the modulus of rupture and breaking strength of the product, the replacement of the fixture can also be used to determine the breaking performance and other parameters. Standard: Meet GB/T3810.4-2016, ISO

Specification Specifications: This machine simulated products package impact resistance capability, such as products carrying, shelf pileup, motor slider, fork load and unload, products shipping, etc.. also used for many scientific research institution, university, package testing center, package manufacture, forwarder company to do inclined plane impact test. Standards: GB/T 4857.11-2005,GB/T1019.2008,ISTA 1A Feature: 1. Can locate motor tackle flexible, easy to get needed

Professional Wood Measurement Analyzer GB/T1933 ASTM JIS ISO Standards Specification In accordance with: according to GB/T1933, ASTM, JIS, ISO standards. Using the Archimedes buoyancy method, the vacuum saturation method, the boiling saturation method, and the particle immersion method are used to quickly read the measured values. Applicable to: Wood, civil industry, new material research laboratory Density measurement modes: Mode 2: The basic density test of wood can use

Five-point Heat Sealing Testing Equipment for Plastic Packaging Film, Seals the Specimen Specification Product name: Plastic Packaging Film Five Point Heat Sealing Tester Summary: Plastic Packaging Film Five Point Heat Sealing Tester seals the specimen under specified temperature, pressure and dwell time, to test the heat seal strength of laminated films. MRE(Meal Ready to Eat) Packaging Heat Seal Strength Tester conforms to standards of ASTM F2029. Features: 1. Mechanical

Fully Automatic Laboratory Video Measuring Machine Points Lines Circles SpecificationProduct introduction:The image measuring instrument can accurately measure points, lines, circles and other elements, and has a powerful report output function, which is especially suitable for measuring a wide range of products in large quantities.Widely used in machinery, electronics, molds, injection molding, hardware, rubber, low-voltage electrical appliances, magnetic materials,