Industrial Automation Equipment

Product Description DX8359F Maximum Temperature Tester for Thermal Insulation Materials Conform to the standard: In line with GB/T17430-1998 "Evaluation Method for the Maximum Service Temperature of Thermal Insulation Materials" relevant standards are not equivalent: ASTM C411-82 "Test Method for Hot Surface Performance of High Temperature Thermal Insulation Materials" ASTM C447-85 "Non-equivalence of Related Standards for Thermal Insulation Materials: ASTM C411-82 "

Suitable for measuring the insulation resistance of high resistance insulation materials, electrical products, various components, rubber and plastic used in wires and cables. The optional electrode box can measure the surface resistance and volume resistance of insulation materials. Complies with the standards ASTM D257-2007 Volume Resistivity and GBT 1410-2006 Test Methods for Material Volume Resistivity and Surface Resistivity. Main technical specification : Measurement

Compliance with standards: Complies with IEC 60950-1:2001, BS EN 60950-1: :2001, BS 7002:2001, GB 4943-2001 "Security of Information Technology Equipment", UL746A, IEC60947.1: In accordance with standards such as 1999, GB/T14048.1-2000, IEC730.1:1993, and GB14536.1-1998. Scope of application: It is mainly applicable to the arc resistance performance test of electrical and electronic products, household appliances and their materials. It simulates the leakage current that may

Compliance with standards: Complies with the test standard requirements of GB/T11835 "Test Method for Thermal Load Shrinkage Temperature of Mineral Wool and Products". Product Overview: Suitable for rock wool, slag wool and glass wool and their products, not suitable for aluminosilicate wool and its products. Under a fixed load, the sample is heated at a certain heating rate to reach the specified thickness shrinkage rate. Through calculation, the thermal load shrinkage

1. Scope of Application The performance of the servo cable compression resistance testing machine is mainly applicable to the compression resistance of mining cables below UC-0.66KVT and UCP-1.14KV. 2. Compliance with standards: Complies with the requirements of the GB12972 test standard. 2. Technical Parameters 1. Maximum measurement load: 200N. 2. Load resolution: 0.01N. 3. Maximum stroke: 600MM. 4. Test speed: Continuously adjustable from 50 to 500 mm /MIN. 5. Test voltage

Compliant with standards: Made in accordance with the GB/T2951.7 "Thermal Stability Test for Insulation and Sheath" standard, and in compliance with UL758, UL1581, UL62, ASTM, GB-1690, IEC811, and VDE0281 test standards. Scope of application: Mainly applicable to the insulation and sheath tests of polyvinyl chloride mixtures for wires and cables. Technical parameters Temperature range: Room temperature to 250℃. 2. Temperature resolution: 0.1℃ 3. Timer: 0 to 99 hours. 4.

It's not online. KV doesn't matter. A better drip system costs 45,000. I. Scope of Application The composite insulator hydrophobicity live detection instrument is a new type of product for online detection of insulator hydrophobicity. It is suitable for on-line detection of the hydrophobicity of composite insulators on transmission lines of 110kV and above voltage levels, as well as for hydrophobicity testing experiments and factory inspection of various composite insulators

This machine is specifically designed to test the folding strength of DC cables, headphone cables, USB cables, plug lead-out cables and wires. The method is to fix the test material on the fixture and apply a certain load. During the test, the fixture will swing left and right. After a certain number of times, check the breakage rate. Or when it cannot be powered on, check its total number of swings. This machine can automatically count. When the test material is bent to the

I. Scope of Application: Applicable to the thermal conductivity of dry clay and sandy soil specimens. The thermal resistance of the specimen should be greater than 0.1m ².k /W. The method of detecting the thermal conductivity and thermal resistance of clay, sand and other materials by using a heat flow meter is connected to a computer to achieve fully automatic detection and generate an experimental report. The instrument calculates the thermal conductivity and thermal

I. Scope of Application The performance of the servo cable compression resistance testing machine is mainly applicable to the compression resistance of mining cables below UC-0.66KVT and UCP-1.14KV. 2. Compliance with standards: Complies with the requirements of the GB12972 test standard. Iii. Technical Parameters Maximum measurement load: 200N. 2. Load resolution: 0.01N. 3. Maximum stroke: 600MM. 4. Test speed: Continuously adjustable from 50 to 500 mm /MIN. 5. Test voltage

I. Usage: It is applicable to the measurement of insulation resistance of high-resistance insulating materials, electrical products, various components and rubber and plastic used in wires and cables. When an electrode box is selected, it can measure the surface resistance and volume resistance of insulating materials. It complies with the standards "ASTMD257-2007 Volume Resistivity" and "GBT1410-2006 Test Methods for Volume Resistivity and Surface Resistivity of Materials".

Instruction for the Use of Millivoltmeter 1. Plug it into a 220v socket. 2. Press the power switch at the back to turn on the machine. 3. Connect the signal to be measured to the back, the red and black terminal blocks (red +, black 1). 4. Press the start button to begin the measurement. The instrument will display the voltage value, with the unit being (mv). 5. Press the "Reset" button to stop the measurement, and the instrument reading will be zero. 6. If the measurement

This device conducts external hydrostatic tests on various high-pressure gas cylinders. It uses an industrial control computer to control the entire set of operation tests including empty cylinder weighing, water filling, full cylinder weighing, and hydrostatic tests. Through these tests, the volumetric residual deformation rate of the gas cylinders can be accurately measured to ensure their safe use. The product is designed and manufactured in accordance with GB/T9251-2021

432/5000 DX8339 Building Materials Non-combustibility Testing Machine Scope of application It is applicable to the test for determining whether building materials are non-combustible under specified conditions. Ii. Compliance with Standards GB/T5464-2010 "Test Method for Non-combustibility of Building Materials", 1S01182:2002 "Test for Fire Reaction of Building Materials" "Non-combustibility test Main parameters The test device includes a heating furnace, sample rack, ga

The pharmaceutical packaging performance tester is also commonly known as the pharmaceutical packaging tear and tensile strength tester. It is mainly used for testing the heat sealing strength, tensile strength, peel strength, elongation at break and other properties of pharmaceutical packaging materials, aluminum foil, PVC hard sheets, composite films, syringes, cassette bottles and other products. Ampoule breaking force test It is a multi-functional testing instrument that

1. Introduction: The handheld coating thickness gauge is a portable measuring instrument that can quickly, undamaged, and accurately measure the thickness of coatings and coatings. It can be used in both laboratories and engineering sites. 2. Scope of application: This instrument adopts magnetic and eddy current thickness measurement methods, which can non-destructive measure the thickness of non-conductive coatings (such as oxide film, enamel, rubber, paint, plastic, etc.)

Product Description: This melt flow rate meter is an improved version that has added many functions, greatly improving instrument configuration, instrument service life, operational convenience, and testing accuracy. It has unparalleled advantages and cost-effectiveness compared to general melt flow rate meters in China. Meets standards: ISO 1133, ASTM D1238, GB/T3682 Product Usage: Used to determine the MFR value of the melt flow rate of various plastics and resins in a

Specification Product introduction: It is the basic instrument (i.e., packaging testing equipment) for corrugated box compressive strength performance testing, which is suitable for compressive strength test, standard test and stacking strength test of various corrugated boxes. Product features: 1. After the test is completed, there is an automatic return function, which automatically judges the crushing force and automatically saves the test data 2. Three settable speeds,

Technical parameters: Contact angle measurement range: 0-180 degrees Contact angle resolution accuracy: ±0.10 Contact angle test method: seat drop method Contact angle analysis method: manual horizontal measurement, manual inclined plane measurement, automatic width and height measurement method (standard test method below plane angle below 20°), manual tangent method, automatic ellipse fitting method (standard test method of plane angle 20°-120°), curve method (special test

Three comprehensive test chamber Control mode and characteristics: The system is designed with international JTM specifications, temperature and humidity control system, and is controlled by P.I.D.+SSR mode, which can be used stably for a long time. The system complies with MIL STD, GB, JIS, JEDEC, IEC and other test specifications. 1. Performance: 1.1 Temperature range: -40~150°C 1.2 Temperature control stability: 0.5°C 1.3 Temperature deviation: 2.0°C 1.4 Temperature change