Perkins Valve

Engine valve T408507 for Perkins 1206E-E70TA and 1206F-E70TTA diesel engines. Forged 21-4N stainless steel, 41mm head, 202mm length. Chrome-plated stem reduces guide wear 40%; stellite tip resists recession. Rated for 480°C and 24,000 hours. ISO9001 certified, 1-year warranty.

Forged 21-4N stainless steel inlet valve with 47mm head, 9.5mm stem, and 167mm length. Chrome-plated stem reduces guide wear by 40%; stellite tip resists rocker wear. ISO9001 certified, 1-year warranty, validated for 24,000 hours at 450°C.

Forged 21-4N austenitic stainless steel exhaust valve with 44.5mm head, 9.5mm stem, and 167mm length. Chrome-plated stem reduces guide wear; stellite-faced tip ensures durability. ISO9001 certified, 1-year warranty, validated for 24,000 hours at 450°C.

WESPC IPR valve 1881094C92 for Navistar MaxxForce DT engines. ISO9001 certified, 12V solenoid, 1.8Ω coil, forged aluminum body with Viton seal. Eliminates P0091/P1211 DTCs. 1-year warranty, in stock.

Precision press-fit valve seat insert for Perkins industrial engines. Sinter-hardened Cr-Mo alloy with 45-50 HRC hardness ensures durability. 42mm OD, 34mm ID, 7.5mm thick. ISO9001 certified, 1-year warranty. Suitable for high boost and EGR applications.

Precision press-fit exhaust valve seat insert for Perkins 1004-4, 1006-6, 1106C, and 2506 diesel engines. Made from sinter-hardened Cr-Mo alloy cast iron (45-50 HRC) with 1.2 µm Ra sealing face. ISO9001 certified, 1-year warranty, and stock available.

Engineered from chrome-silicon alloy steel with shot-peened finish and blue-oxide coating for 96h salt-spray resistance. Delivers 95N seat load at 37mm installed height. ISO9001 certified, preset for

Chrome-silicon alloy steel valve spring with 210 N seat load and 520 N open load. Shot-peened, stress-relieved, blue-oxide finish. Validated for 2 million cycles at 2800 rpm. ISO9001 certified, 1-year warranty.

Precision inlet valve seat for Perkins 1004-4, 1006-6, 135TI, and 1106 engines. Sinter-hardened alloy cast iron with 45-50 HRC hardness ensures durability. 38mm OD, 45° sealing face. ISO9001 certified, 1-year warranty, in stock.

Precision-machined intake valve guide for Perkins 4.236, 1004-4, 1006-6 engines. Centrifugally-cast grey iron with diamond-honed bore reduces wear by 30%. ISO9001 certified, 1-year warranty, stock available.

Precision-machined exhaust valve guide for Perkins 4.236, 1004-4, 1006-6 engines. Centrifugally-cast grey iron with diamond-honed bore reduces wear by 30%. ISO9001 certified, 1-year warranty, direct stock.

High-purity MVQ silicone gasket with stainless steel carrier, oil and fuel resistant. ISO9001 certified, 1 year warranty. Direct replacement for Perkins 6-cylinder engines. Custom options available.

High-purity MVQ silicone gasket, 1.5 mm thick, for Perkins 4-cylinder diesels. Oil and fuel resistant with

High-temperature fluorosilicone rubber gasket with steel carrier resists oil, biodiesel, and coolant mist. ISO9001 certified, 1-year warranty. Covers 40 years of Perkins 4-cylinder engines for backhoe loaders, tractors, and generators.

Precision-machined exhaust valve seat for Perkins 1106C/1106D and legacy 4.236 engines. 38mm OD, 45° seat angle, Cr-Mo-V alloy with self-lubricating graphite. ISO9001 certified, 1-year warranty, in stock. Reduces valve recession and wear.

Precision-machined valve seat inlet for Perkins 1106C/1106D and legacy 4.236 engines. Features 38mm OD, 45° seat angle, and Cr-Mo-V alloyed iron with self-lubricating graphite. ISO9001 certified, 1-year warranty, and stock available.

Precision-machined valve guide for Perkins 1106C/1106D engines. Made from Cu-Cr-Mo alloyed cast iron with diamond-honed bore for reduced wear. ISO9001 certified, 1-year warranty, and in stock. Compatible with JCB, Manitou, and Massey Ferguson equipment.

WESPC exhaust valve T401137 for Perkins 1106C/1106D engines. Made from 21-4N austenitic steel with stellite seat overlay and chrome-plated guide band. ISO9001 certified, 1-year warranty, and stock available. Durable, high-temperature resistant, and compatible with multiple models.

WESPC T401136 intake valve for Perkins 1006.6 and 1106 series engines. Forged from 21-4N austenitic steel with stellite-6 seat overlay and chromium-plated guide band. ISO9001 certified, 1-year warranty, and in stock. Reduces wear, extends overhaul intervals to 12000 hours.

Precision-formed from Cr-Si spring steel (SAE 6150), heat-treated to 48-52 HRC and shot-peened for fatigue life above 1×10⁷ cycles. Self-locking 7° taper prevents back-out under vibration. ISO9001 certified, 1-year warranty, stock available.