Electronic Control Module

4.3-inch TFT-LCD display with multilingual interface. Supports CANBUS J1939, RS485, and USB programming. Features 18 digital inputs, 12 relay outputs, and IP55 front panel. Ideal for automatic start/stop, alarm protection, and remote monitoring in diesel fire pump systems.

Smartgen APC715 pump controller for engine-driven systems. Features 4.3 TFT LCD, CANBUS J1939, GOV pressure control, 10 analog inputs, and IP55 front panel. Supports remote monitoring via RS485 and USB programming. Ideal for industrial pump automation.

Multi-functional engine control box with 5-screen LED display, customizable sensor curves, and user-set protection values. Features over speed, low oil pressure, high temperature, and low battery voltage alarms. IP54 front face, DC 8-36V power, and 1.6kg lightweight design for reliable industrial use.

The BX50C control box integrates GM50C multifunctional instrument for EFI engines, reading ECU parameters and displaying alarm codes. Features 5 LED displays, CAN interface, panel key settings, and multiple protections. Uses flame retardant cables and CHINT switches for reliable, cost-effective performance.

32-bit MCU with LED display for engine water temp, oil pressure, battery voltage, and runtime. Features low oil pressure and high water temp protection, RS485 Modbus remote monitoring, customizable sensor curves, and alarm relay. Durable IP42 design with included wiring harness for easy installation.

Smartgen APC615 pump controller enables automatic start/stop, pressure regulation via engine speed, and CANBUS J1939 communication. Features LCD display, IP65 front panel, 6 analog inputs, RS485 remote monitoring, and wide 8-35V DC supply. Ideal for engine-driven pump systems.

The DT4000 4G module enables remote monitoring and control of generator sets via PC or mobile app. Features GPS positioning, RS485 communication, wide DC 8-36V input, and encrypted data protocol. Supports LTE-TDD/FDD networks. Compact ABS design for easy installation.

Original Smartgen HGM7120N AMF controller for diesel gensets. Features 132x64 LCD, 7 digital inputs, 8 relay outputs, RS485/USB/Ethernet. Supports 1P2W to 3P4W AC systems, 50/60Hz. Durable silicone panel, IP65 front, wide DC 8-35V input. Ideal for reliable auto mains failure and remote monitoring.

The HAT553 ATS controller features a 132x64 LCD, RS485 ModBus, and configurable inputs/outputs. It supports dual 3-phase voltage measurement, over/under voltage protection, and scheduled genset start. Ideal for dual power systems in telecom, municipal, and industrial applications.

SmartGen HAT552 dual power ATS controller with 132x64 LCD, RS485 communication, and RTC. Measures 2-channel 3-phase voltages with over/under voltage, loss of phase, and frequency protection. Supports auto/manual modes, scheduled start, and event logging. Ideal for industrial power systems.

Intelligent dual-power bus-tie switchover module with 240x128 LCD, 8 programmable inputs, and 12 outputs. Supports 1P2W/3P4W AC systems, 50/60Hz, and RS485/USB communication. Offers over/under voltage and frequency protection, real-time clock, and manual/auto modes. Ideal for power, telecom, and industrial automation.

Intelligent tri-supply ATS controller with 4.3-inch LCD, 8 programmable inputs, and 12 outputs. Supports 3-way 3-phase voltage monitoring, over/under voltage protection, and ModBus-RTU communication. Ideal for power automation in telecom, petroleum, and industrial systems.

The Smartgen ALC404 is a microprocessor-based controller for AC/DC lighting towers, supporting up to 4 lamps. Features include scheduled start/stop, sunrise/sunset control, CANBUS J1939 engine interface, LCD display, and USB programming. Ideal for reliable automation and remote monitoring.

Smartgen ALC708 controller automates light tower sets with scheduled, sunrise/sunset, SMS, and remote start/stop. Controls up to 8 lights, supports AC/DC systems, LCD display, RS485 & USB ports, and 99 event logs. Ideal for reliable remote monitoring and control.

Smartgen ALC704 controller automates light tower start/stop with scheduled, sunrise/sunset, and remote SMS control. Supports AC/DC sets, LCD display, 8 digital inputs, 10 relay outputs, RS485/USB, and 99 event logs. Durable, compact, and easy to install.

The HGM6120CAN is a digital AMF controller for diesel generator sets. It features a 132x64 LCD, RS485 and CANBUS ports, and supports 50/60Hz AC systems. With multilingual interface, event logging, and scheduled start, it ensures reliable auto mains failure control and remote monitoring.

Original Smartgen MGC320 AMF controller with LCD display, RS485 monitoring, and wide DC 8-35V supply. Supports 1P2W/3P4W AC systems, 50/60Hz. Features precise measurement, programmable outputs, and IP65 protection. Ideal for single-unit genset automation.

The Smartgen MGC120 is a compact AMF controller for single petrol gensets, featuring LED nixie tube display, silicone button panel, and 2 digital inputs. It offers auto start/stop, ATS control, and protection against over/under voltage and frequency. Customizable via LINK port. Reliable and easy to install.

Smartgen HGM4020T controller for mobile base stations. Features LCD display, RS485 remote monitoring, dual ATS control, and 7 digital inputs. Supports 50/60Hz, DC 8-35V. Durable silicone panel, IP65 protection, and 1-year warranty.

Original Smartgen HGM9420N genset controller with LCD display, RS485, USB, Ethernet, and CAN BUS. Supports AMF, synchronous transfer, cloud monitoring, and SMS. 10 digital inputs, 8 relay outputs, DC 8-35V supply. Ideal for single genset automation.