Special Vehicle Parts

DN150 Subsea Valve for Tank Trucks - Oil Applications Factory direct sales DN150 asphalt/crude oil subsea valve designed for tank trucks to prevent liquid leaks in oil applications. Product Specifications Nominal Diameter DN150 Positive Pressure 0.6Mpa Main Material Carbon Steel Design Temperature -20°C to +180°C Weight 25kg Seal Material Fluoro rubber Applicable Media Asphalt, Oil Product Description The emergency cut-off valve (also known as Bottom Loading Valve) is

Chemical Tank Truck Subsea Valve with Stainless Steel F46 Material and Viton/PTFE Seal Product Description Hot Selling Chemical Tank Truck Subsea Valve Stainless Steel Hydraulic Subsea Valve Specification Value Nominal Diameter DN100 Positive Pressure 0.6Mpa Flange Size 4"/6" Weight 25kg Main Material Stainless Steel F46 Design Temperature -20~+150 Seal Material Viton/PTFE Applicable Media Sulfuric acid, nitric acid, sodium chloride, sodium hydroxide Opening Method Hydraulic

Aluminum Alloy Pneumatic Emergency Shut-off Valve for Tank Trucks Operating Temperature: -20°C to +70°C | Positive Pressure: 0-0.6Mpa Product Description Specification Value Nominal Diameter 4" Positive Pressure 0-0.6Mpa Weight 7kg Main Material Aluminum Alloy Design Temperature -20°C to +70°C Applicable Media Light fuel Seal Material Nitrile rubber, fluoro rubber Opening Method Pneumatic This emergency cut-off valve (also known as subsea valve) is installed at the bottom of

Direct Manufacturers of 3kg Aluminum Alloy Manual Emergency Shut-off Valve for Tank Trucks (Nominal Diameter 4") Manufacturers direct sales of tank truck aluminum alloy manual emergency shut-off valve. This valve is a special emergency cut-off valve for foreign trade exports. Specification Value Nominal Diameter 4" Positive Pressure 0.6Mpa Weight 5.3kg Main Material Aluminum Alloy Design Temperature -20°C to +50°C Applicable Media Light fuel Seal Material Nitrile rubber,

Compressed Air Applicable Aluminum Alloy 2 Compartment Pneumatic Combination Switch for Tank Truck Product Description Specification Value Working Pressure 0.5-0.8Mpa Main Material Aluminum Alloy Design Temperature -20~+70°C Applicable Media Compressed Air Air Internal 6mm This pneumatic combination switch is designed for centralized control of pneumatic valves on tankers, including oil/gas recovery valves, side plate vent valves, and pneumatic emergency cut-off valves. It

High Flow Rate Valve with Two-position Three-way Hand-pull Structure Factory direct sales of two-position three-way structure hand-pull valve for tank trucks, featuring easy installation and reliable gas path control. Product Specifications Product Name Two-position Three-way Hand-pull Valve For Tank Trucks Structure Two-position three-way type The two-position three-way structure allows connection of interfaces as required. When the handle is pulled up or pressed, the switch

3 Inch Stainless Steel Vapor Recovery Valve The oil and gas recovery valve is installed on the manhole cover or on the top of the tank. It controls the flow of gas into or out of the tank during oil loading and unloading, serving as a key accessory for oil and gas recovery systems. Product Features Constructed with durable stainless steel for long-term reliability Designed for light fuel oil transportation applications Pneumatic operation for efficient control High-quality

Fluorine Rubber Sealing Material Pneumatic Opening Aluminum Alloy Oil and Gas Recovery Valve Industrial Oil Recovery Valve for Tank Trucks The oil and gas recovery valve is installed on the manhole cover or tank top to control gas flow during oil loading and unloading operations. This aluminum alloy valve is a critical component for implementing oil and gas recovery systems in light fuel oil transportation. Product Features Constructed from durable aluminum alloy for light

4 Inch Plastic Lined Pneumatic Subsea Valve for Tank Truck Flange Size 4"/6" Product Description High quality 4 inch plastic lined pneumatic subsea valve designed for tank trucks, featuring superior performance and reliability. Specification Value Nominal Diameter DN100 Positive Pressure 0.6Mpa Main Material Stainless Steel/F46 Design Temperature -20~+120°C Weight 21kg Seal Material Vition, PTFE Flange Size 4"/6" Applicable Media Sulfuric acid, nitric acid, sodium chloride,

Emergency Pressure Relief Stainless Steel 304 Safety Valve for Tank Trucks Factory direct sale stainless steel 304 safety valve designed specifically for tank trucks, featuring emergency pressure relief functionality. Product Specifications Nominal diameter DN80 Positive Pressure 4.4Bar Negative Pressure 0.2Bar Design Temperature -40°C to +150°C Weight 6kg Main Material Stainless Steel 304 Sealing Material Polytetrafluoroethylene Key Features Installed on tank car tops for

16 Inch Oil Tanker Clamp Manhole Cover for Truck Product Introduction The manhole cover is installed on the top of the tank car and features internal breathing and emergency exhaust functions. During oil transportation, the internal breathing valve maintains pressure balance between the tank interior and exterior. When pressure rises sharply, the emergency exhaust device automatically activates to release internal pressure. Even in case of accidents, the anti-overflow device

16 Inch Oil Tanker Clamp Manhole Cover for Truck Product Introduction The manhole cover is installed on the top of the tank car and has the functions of internal breathing and emergency exhaust. During oil transportation, the internal breathing valve maintains pressure balance between the tank interior and exterior. When pressure rises sharply, the emergency exhaust device automatically activates to release internal pressure. In case of an oil tank truck accident, the anti

16inch/20inch Stainless Steel Chemical Tanker Fuel Tank Truck Manhole Cover European Stainless Steel Manhole Cover for Fuel Tanker This high-quality manhole cover is designed for installation on tanker trucks, providing essential safety features including internal breathing and emergency exhaust functions. During fuel transportation, it maintains pressure balance and automatically releases excess pressure when needed. Key Features Maintains internal/external pressure balance

Aluminum Alloy European Standard Manhole Cover for Oil Tank Truck Trailers Product Introduction This aluminum alloy manhole cover is designed for installation on oil tank truck trailers. It features dual functionality for internal breathing and emergency exhaust during oil transportation: Maintains internal and external pressure balance through the internal breathing valve Automatically releases internal pressure through emergency exhaust when pressure rises sharply Includes

Stainless Steel 304 Vacuum Pressure Reducing Valve for Tank Trucks (-20°C to +150°C) Factory direct sale stainless steel 304 vacuum pressure reducing valve designed specifically for tank trucks to ensure safe transportation by balancing internal tank pressure. Specification Value Nominal Diameter DN50 Nominal Pressure 0.6MPa Main Material Stainless Steel 304 Design Temperature -20°C to +150°C Weight 1.2kg Seal Material Viton Connection Threaded Design Pressure 21Kpa-24Kpa

Stainless Steel Emergency Shut-off Valve for Tank Bottom Factory direct sale stainless steel emergency shut-off valve designed for tank bottom installation with ambient temperature range of -40°C to +200°C. Product Specifications Nominal Diameter DN80 Nominal Pressure 600kpa Main Material Stainless Steel 304 Applicable Media Chemical Material Design Temperature -40°C to +200°C Weight 8kg Seal Material PTFE Product Features Installed at the bottom of tank containers (also

Customized Stainless Steel Quick Connector with High Accuracy Product Introduction This stainless steel quick connector is designed for use in multiple industries including chemical, petrochemical, electromechanical, shipbuilding, metallurgy, machinery manufacturing, aerospace, automotive, pneumatic, and hydraulic applications. The tool-free design enables quick installation and easy disassembly, offering an economical and practical solution for various connection needs.

Aluminum Alloy Pipe Filter Three-way Valve for Fuel Tanker Truck High Flow Rate with DN50/65/80 Nominal Diameter The Aluminum Alloy Pipe Filter Three-way Valve is designed for fuel tanker trucks, featuring high flow rate capacity and available in DN50, DN65, and DN80 nominal diameters. Product Introduction The aluminum alloy filter three-way valve consists of a main pipe, filter cartridge, flange, and fasteners. Available in water and oil variants, this filter is suitable for

Stainless Steel 4-Way Tee Ball Valve Product Introduction The tee ball valve features an aluminum alloy or stainless steel shell with a stainless steel ball core. Its compact structure, lightweight design, and ease of use make it ideal for pipeline control applications. Equipped with limit and locking mechanisms for enhanced safety and reliability. Key Applications Aluminum Alloy version: Non-corrosive liquid pipelines (tank trucks, gas stations) Stainless Steel version:

Fuel Water Tank Parts DN50/65/80 Aluminum Alloy Ball Valve With Filter Product Introduction The filter tee (filter) is primarily composed of main pipe, filter cartridge, flange, and fasteners. Available in water and oil variants, the filter screen effectively processes various fluids including water, corrosive media, mud, oil, liquid metal, and radioactive media. The system traps solid impurities within the filter cartridge while discharging purified media through the outlet.