Pressure Transmitter

Original Evans+Haus Cerabar PMP43 is an ultra-compact sanitary pressure transmitter with certification for high-temperature CIP or SIP cleaning. Designed for tight food and personal care processes, it is preferred for hygienic applications. Contact us for specifications.

Submersible Static Pressure Level Gauge Endress+Hauser Waterpilot features 316L stainless steel housing with IP65/IP66/IP67 protection. Relative pressure measurement with 10-meter cable supports IO-Link and Bluetooth adjustment. Inquire now for level specifications.

Digital Pressure Transmitter with ceramic diaphragm integrates a digital chip and MCU for 4-20mA analog and digital output. It enables remote reading, range adjustment, zero calibration and fault alarm. Inquire now for IP65 options.

Diaphragm Seal Pressure Transmitter isolates the sensing element from corrosive, crystallizing, high-viscosity or solids-laden media. It prevents port clogging and corrosion that defeat conventional transmitters. Inquire now for seal and material options.

Switch-Type Capacitive Level Gauge is purpose-built for viscous and adhesive materials where floats stick and rods jam. Featuring PEEK probe, 316L housing and NPN+PNP PWM output, it delivers stable level detection. Contact us for viscosity application details.

High-Temperature Metal Glue Probe Position Sensor is built for 250 degrees C service with a Teflon probe and aluminum construction. It monitors adhesive glue pots and hot-melt lines where standard probes exceed ratings. Inquire now for specifications.

E+H PTP31B Pressure Switch features a welded metal diaphragm sensor with G1/2 brass connection and IP65 waterproof rating. This economical switch measures gases, steam or liquids including water, available for wholesale. Contact us for specifications.

3051 High Precision Stainless Steel Pressure Transmitter measures liquid, gas or steam pressure from 0.3 to 10000 PSIA, converting it into 4-20mA signals. Widely used in petroleum, chemical and power industries. Inquire now for specifications.

Wireless LoRa Water Tank Level Alarm Box reads a standard 4-20mA level transmitter and sends high or low alarm status over LoRa wireless to a remote control box. It enables cost-effective level monitoring for remote tanks and reservoirs. Contact us for LoRa network requirements.

Capacitive Proximity Level Sensor is engineered for 200 degrees C hot melt glue machines where molten adhesive destroys ordinary sensors. The high-temperature design detects hot sticky adhesive with 24V operation. Inquire now for specifications.

SS316 Resonant Pressure Transmitter measures pressure by detecting resonant frequency change, eliminating drift from aging electronics and temperature shifts. With high resolution and 0.5%FS stability, it suits precision applications. Inquire now.

Original Evans+Hausser PMC51B Smart Pressure Transmitter combines capacitive measurement with metal diaphragm for corrosive liquids and gases. Supporting low and high pressure ranges, it adapts to demanding applications. Contact us for range options.

Digital Display Vacuum Transmitter uses a diffusion silicon sensor with digital readout for accurate negative pressure measurement. Suiting packaging, drying, degassing and suction lines, it outputs 4-20mA with local display. Contact us for vacuum range options.

Non-Contact Ultrasonic Level Gauge detects grain silo level from above without touching bulk solids, avoiding probe damage and dust fouling. With analog current or voltage output, it integrates into silo monitoring systems. Contact us for WUB3000 details.

Original Endress+Hauser FMB53 Pressure Transmitter features a sealed Contite cell with condensation resistance and accuracy of plus or minus 0.2% or 0.1%. Modular design eases display and electronics replacement with HART, PA or FF integration. Contact us for details.

Versatile Pressure Transmitters convert physical pressure signals into standard electrical signals for process industries. Custom configuration supports petrochemical, power, pharmaceutical and food applications. Contact us for configuration guidance.

Vacuum Pressure Transmitter precisely monitors pressure below atmospheric level for distillation, drying, coating and degassing processes. With IP67 protection, it resolves vacuum readings where standard gauge transmitters cannot. Contact us for vacuum range specifications.

E+H PMP55 intelligent pressure transmitter features a fully welded metal diaphragm seal for ultra-high temperature, high pressure and strong corrosion. It excels in pressure and level measurement in harsh environments. Contact us for extreme condition specifications.

Cerabar PMP51B Intelligent Pressure Sensor measures liquids and gases with Endress+Hauser quality and multiple communication interfaces. It integrates into diverse automation architectures with 12-month warranty. Contact us for measurement specifications.

Evans-Hauser PMC51 Digital Pressure Sensor uses 99.9% alumina ceramic for exceptional accuracy and durability. Made in Germany by Endress+Hauser, it serves automation and industrial equipment with reliable long-term performance. Inquire now for specifications.