Gefran Position Sensors

Product Identity The Gefran PY-2-F-050-S01M 0000X000X00 is a PY2 spring-return potentiometric transducer with a 50 mm useful electrical stroke and a 1 m screened connection cable. The exact Gefran ordering number is F004242. This configuration combines the longest stroke among the three selected S01M versions with direct ball-tip contact measurement. It can monitor a moving surface continuously where a fixed connector would complicate installation or where the signal cable

Product Overview The Gefran PY-2-F-010-S01M 0000X000X00 is a compact PY2 spring-return position transducer configured with a 10 mm stroke and a factory-connected 1 m screened cable. The verified Gefran ordering number is F004215. This cable-equipped configuration is particularly relevant where a detachable DIN connector would be too large, exposed to contamination or inconveniently positioned. The ball-tipped probe follows short linear movement and returns automatically as

50 mm Spring-Return Measurement Range The Gefran PY-2-C-050 0000X000X00 is the 50 mm connector-equipped configuration within the PY2 family. It carries Gefran ordering number F004207 and combines a spring-return control rod, stainless-steel ball contact tip and 5-pole DIN 43322 electrical connector. This version is intended for applications that require more travel than the 10 mm and 25 mm PY2 models while retaining direct contact measurement. The sensor supplies continuous

Product Identity and Intended Use The Gefran PC-M-0300 0000X000X00, ordering number F003878, is a PC-series cylindrical potentiometric transducer configured for 300 mm of linear travel. It is intended for continuous position monitoring on longer moving assemblies where jointed mounting is more suitable than attaching a rigid profile sensor directly to a machine frame. The sensor’s self-aligning rod-eye arrangement permits the transducer to follow an articulated linkage while

Rod-Eye Sensor for Articulated Machine Motion The Gefran PC-M-0100 0000X000X00 is a cylindrical potentiometric position transducer with a 100 mm measurement stroke. Its verified Gefran ordering number is F003846. In contrast to a rigid profile-mounted LT sensor, the PC construction uses self-aligning rod-eye or ball-joint mounting for applications where the moving assembly may introduce limited angular variation during its travel. This mechanical arrangement is relevant to

Product Overview The Gefran LT-M-0200-S 0000X000X00 is a 200 mm potentiometric linear position transducer from the Gefran LT family. The verified ordering number for this configuration is F003538. It is designed to generate continuous absolute feedback from the movement of industrial machine components such as slides, positioning carriages, forming equipment and material-handling mechanisms. The 200 mm travel is the defining characteristic of this version. Although shorter LT

25 mm Cable-Connected PY2 Configuration The Gefran PY-2-F-025-S01M 0000X000X00 is a 25 mm spring-return potentiometric position transducer supplied with a 1 m screened cable. Its verified ordering number is F004228. It is designed for direct-contact measurement where the moving target depresses the stainless-steel ball-tipped probe. Because the output corresponds to absolute rod position, the controller can determine displacement immediately after power is applied. No

Product Overview The Gefran PY-2-C-025 0000X000X00 is a PY2-series spring-return potentiometric position transducer with a verified 25 mm electrical stroke. Gefran ordering number F004199 identifies this standard connector configuration. The sensor measures movement through direct contact between its stainless-steel ball tip and the monitored machine component. The internal return spring maintains probe contact as the target moves. This makes the unit suitable for short

100 mm Linear Measurement Configuration The Gefran LT-M-0100-S 0000X000X00 is an LT-series potentiometric linear position transducer identified by Gefran ordering number F003494. It provides absolute position feedback over a 100 mm electrical stroke and is intended for machinery where the movement of a slide, carriage, guide or other linearly moving component must be converted into a proportional electrical signal. Unlike a proximity switch that reports only an end position,