Programmable Logic Controller PLC

The Beckhoff KL3064 is a 4-channel single-ended analog voltage input module for 0-10 V signals. Featuring 12-bit resolution, pluggable terminal blocks for simplified maintenance, and a compact 12 mm width. Certified CE, UL, ATEX, IECEx, DNV GL. Ideal for industrial automation and sensor signal acquisition.

High-performance industrial PC with Intel Core i7-8665UE, 4 GB DDR4 RAM, and fanless operation. Features modular expansion, up to 9 Ethernet ports, optional 1-second UPS, and TwinCAT 3 support. CE, UL, cULus certified for reliable automation.

Compact industrial PLC with Intel Atom processor, 40 GB M.2 SSD, and fanless passive cooling. Supports TwinCAT 3, EtherCAT, and wide 24 V DC input. CE/UL certified, IP20 rated, with flexible mounting options for demanding automation environments.

Compact DIN rail PLC with Intel Celeron M 1 GHz, 256 MB DDR RAM, and dual Ethernet ports. Fanless design, IP20 rated, supports TwinCAT 2 and IEC 61131-3. CE and UL certified for reliable automation.

The 1756-OB16I is a 16-channel isolated DC output module for ControlLogix systems. Features 2A per channel, 10-30V DC wide voltage range, and independent channel isolation. Supports sink/source output with configurable fault states. UL/CSA/CE certified, ideal for solenoid valve and relay control in harsh industrial environments.

High-performance modular PLC with 32-bit ARM9 processor, 4MB RAM, and 8MB Flash. Supports CANopen master, serial communication, and up to 1024 I/O points. Ideal for industrial automation with CE, UL, and Green Premium certifications.

Schneider Modicon M221 TM221CE24R PLC with 256KB memory, 14 digital inputs and 10 relay outputs. Supports CoDeSys programming, dual RJ45 ports, and wide 100-240V AC input. Compact DIN rail design with CE, CSA, and CULus certifications for global industrial automation.

Beckhoff KL3408 K-bus terminal, 8-channel single-ended analog input for ±10 V signals. 12-bit resolution, 4 ms switch time, and 500 V isolation. Plug-and-play, 12 mm wide, DIN rail mount. Ideal for PLC/DCS systems acquiring pressure, displacement, or temperature sensor signals.

Compact DIN rail PLC with ARM Cortex A8 1 GHz processor, 1 GB RAM, dual microSD slots, and 2x RJ45 Ethernet. Supports TwinCAT, EtherCAT, PROFIBUS, CANopen, and PROFINET. Wide temp range -25 to 60 °C, CE/UL certified, fanless design.

Fanless industrial PC with Intel Celeron 827E, 2 GB DDR3 RAM, and dual Gigabit Ethernet. Supports wide temperature range -25°C to +60°C, CE/UL certified, and expandable via fieldbus modules. Ideal for reliable automation control.

Beckhoff CX8090 PLC with ARM9 400 MHz processor, 64 MB RAM, and 512 MB microSD storage. Features dual RJ45 Ethernet, Modbus TCP, and TwinCAT IEC 61131-3 programming. Compact DIN rail design with IP20 rating, 24V DC input, and certifications including CE, UL, and ATEX. Ideal for small equipment control and distributed I/O.

The 1794-VHSC is a 2-channel high-speed counter module for Allen Bradley Flex I/O. Supports single-ended and differential inputs up to 1 MHz, 32-bit counting, and PWM output. Features 4 isolated outputs, Ethernet configuration, and UL/CSA/CE/ATEX certifications. Ideal for position and speed feedback in industrial automation.

Beckhoff EL2008 8-channel digital output module with 24V DC, 0.5A per channel, and EtherCAT protocol. Features 500V electrical isolation, short-circuit and reverse polarity protection, microsecond switching, and plug-and-play installation. Ideal for high-speed industrial automation.

Beckhoff EK1101 EtherCAT coupler with 2 RJ45 ports, 100 Mbit/s, and 24V DC power. Supports up to 65,535 terminals, 1 μs delay, and hot-connection. Certified CE, UL, ATEX, IECEx. Ideal for machine tools, robotics, and smart factories.

The KL3458 is an 8-channel analog input terminal with 16-bit resolution, supporting -10 to +10 V and 0/4-20 mA signals. Galvanic isolation per channel ensures high precision in harsh environments. CE, UL, RoHS certified. Ideal for distributed process control, energy, and water treatment systems.

The Beckhoff EL6751 is a 1-channel EtherCAT terminal with CANopen interface, supporting master/slave modes. Features 500V electrical isolation, 10-1000 kbaud baud rate, and up to 127 nodes. Ideal for retrofitting CANopen devices into EtherCAT systems. Compact DIN rail design with LED diagnostics. CE, UL, ATEX certified.

16-axis motion control module for MELSEC-Q series with SSCNET III/H interface. Supports 600 positioning data per axis, 4 inputs, CE/UL certified. Compact design 27.4mm wide, 0.16kg. Ideal for multi-axis automation.

The Beckhoff EL1008 is an 8-channel digital input EtherCAT terminal for 24V DC signals. It features real-time bus communication, hot-swappable design, and wide operating temperature range. Ideal for automated machinery, packaging, and logistics. Compatible with all Beckhoff EtherCAT masters.

High-performance PLC with 32-bit RISC processor and DIN rail mounting. Supports IEC 61131-3, multi-protocol communication, and edge computing. Ideal for distributed automation, offering real-time control, durability, and industrial certifications.

Compact DIN rail mounted embedded PLC with 500 MHz processor and TwinCAT runtime. Supports EtherCAT and all Beckhoff I/O terminals for flexible automation. Passive cooling, IP20, DC 24V. Ideal for assembly, packaging, and logistics control.