Variable Frequency Drives VFD

Input voltage AC 1PH 200V–240VAC 3PH 200V–240VAC 3PH 380V–480V Overload capacity 150%/60s, 180%/10s IP rating IP20 Environment condition -10–50℃AltitudeBelow 1000m. Derate by 1% for every increase of 100m when the altitude is 1000–2000m. EMC EU models with built-in C3 filters, meeting class C3 requirements (4kHz/10m) Safety The safe torque off (STO) meets EN/IEC 61800-5-2: SIL2 design. Motor control Space voltage vector control (V/F), and sensorless vector control (SVC) Motor

Input voltage AC 1PH 200V–240VAC 3PH 200V–240VAC 3PH 380V–480V Overload capacity 150%/60s, 180%/10s IP rating IP20 Environment condition -10–50℃AltitudeBelow 1000m. Derate by 1% for every increase of 100m when the altitude is 1000–2000m. EMC EU models with built-in C3 filters, meeting class C3 requirements (4kHz/10m) Safety The safe torque off (STO) meets EN/IEC 61800-5-2: SIL2 design. Motor control Space voltage vector control (V/F), and sensorless vector control (SVC) Motor

Input voltage AC 1PH 200V–240VAC 3PH 200V–240VAC 3PH 380V–480V Overload capacity 150%/60s, 180%/10s IP rating IP20 Environment condition -10–50℃AltitudeBelow 1000m. Derate by 1% for every increase of 100m when the altitude is 1000–2000m. EMC EU models with built-in C3 filters, meeting class C3 requirements (4kHz/10m) Safety The safe torque off (STO) meets EN/IEC 61800-5-2: SIL2 design. Motor control Space voltage vector control (V/F), and sensorless vector control (SVC) Motor

Input Voltage (V): AC 3PH 380~480V Rated voltage: 380V Voltage transient fluctuations are allowed: -15%~+10% Input Current (A): Refer to the GD270 Rated Parameter Table Input Frequency (Hz): 50Hz or 60Hz, allowable range 47~63Hz Output Voltage (V): 0~input voltage Output Current (A): Refer to the GD270 Rated Parameter Table Output Power (kW): Refer to the GD270 Rated Parameter Table Output Frequency (Hz): 0~400Hz Control mode: Spatial voltage vector control mode, no PG vector

Input Voltage (V): AC 3PH 380~480V Rated voltage: 380V Voltage transient fluctuations are allowed: -15%~+10% Input Current (A): Refer to the GD270 Rated Parameter Table Input Frequency (Hz): 50Hz or 60Hz, allowable range 47~63Hz Output Voltage (V): 0~input voltage Output Current (A): Refer to the GD270 Rated Parameter Table Output Power (kW): Refer to the GD270 Rated Parameter Table Output Frequency (Hz): 0~400Hz Control mode: Spatial voltage vector control mode, no PG vector

Series: MD520 High Performance Vector Frequency Converter Rated Power: 0.4kW (approximately 0.53 horsepower) Applicable Motors: Three-phase asynchronous / Permanent magnet synchronous motors Input Voltage: Three-phase AC 380V (±15%), 50/60Hz Rated Input Current: 1.8A Rated Output Current: 2.5A Output Frequency Range: 0 - 500Hz Carrier Frequency: 0.5 - 16kHz (automatically adjustable) Control Mode: V/F Control, Open-loop Vector SVC, Closed-loop Vector FVC (requires encoder)

Open loop V/f & sensorless vector control Closed loop FVC control Starting torque 150% at 0.25 Hz for SVC 180% at 0 Hz for FVC Automatic torque boost Slip compensation Communications options: Modbus-RTU PROFIBUS-DP PROFINET CANopen CANlink Simplified parameters for easy start-up 4-independent S-ramps Flexible programmable I/O connection User programmable function Variable DC injection braking Comprehensive trip diagnostics Output frequency 500 Hz Built-in dynamic braking unit

Manufacturer Series Model Input Voltage Input Phases Output Voltage Max Applicable Motor Power (HD, kW) Max Applicable Motor Power (ND, kW) Rated Output Current (HD, A) Rated Output Current (ND, A) Overload (HD) Overload (ND) Control Method IP Rating Standards Yaskawa V1000 CIMR-VA2A0056FAA 200V 3-Phase 0-200V 11.0 15.0 31.0 41.3 150% 60s 120% 60s Open Loop Vector, V/f IP20 CE, cUL, UL, RoHS Yaskawa V1000 CIMR-VA2A0072FAA 200V 3-Phase 0-200V 15.0 18.5 41.0 54.7 150% 60s 120%

Manufacturer Series Model Input Voltage Input Phases Output Voltage Max Applicable Motor Power (HD, kW) Max Applicable Motor Power (ND, kW) Rated Output Current (HD, A) Rated Output Current (ND, A) Overload (HD) Overload (ND) Control Method V/f IP Rating Standards Yaskawa V1000 CIMR-VA2A0001FAA 200V 3-Phase 0-200V 0.1 0.2 1.2 1.8 150% 60s 120% 60s Open Loop Vector V/f IP20 CE, cUL, UL, RoHS Yaskawa V1000 CIMR-VA2A0002FAA 200V 3-Phase 0-200V 0.2 0.4 1.8 2.7 150% 60s 120% 60s

Model: MD200S0.4B-CAN 0.4KW Power: 0.4kW Input: Single-phase 220V Output: Three-phase 0 - 220V Rated current: 3.4A Overload: 150% for 60 seconds Frequency range: 0 - 599Hz Control: V/F + Vector Control Included: Braking unit, Modbus communication Protection: IP20 Cooling: Natural air cooling

Model: CS710-4T1.5GB 1.5KW Parameter Value Brand HuiChuan INOVANCE Rated Power 0.75 kW Voltage Level Three-phase 380V (compatible with 400V power grid, supports 380~480Vac wide input range) Series Positioning Special-purpose high-performance inverter for lifting equipment Rated Output Current 2.1 A Applicable Motor Power 0.75 kW (three-phase asynchronous motor) Control Mode High-performance asynchronous motor vector control (open-loop / closed-loop selectable) Output

Rated input voltage: AC 3PH 6kV, AC 3PH 10kV Voltage fluctuation range: -10% to +10% Input frequency: 50/60Hz; ±5% Input current harmonics: Complies with IEEE519-2014 and GB/T14549-93 standards Output voltage range: 0~6kV, 0~10kV Output current range: Refer to 2.4.4 Product Specifications Dimensions Output capacity range: 0~5600kVA, 0~10000kVA Output power range: 0~4500kW, 0~8000kW Output frequency range: 0~120Hz (customizable for over 120Hz) Output current harmonics: ≤2%

Input voltage AC 1PH 220V ~ 240V AC 3PH 220V ~ 240V AC 3PH 380V ~ 480V Input frequency 50Hz or 60Hz, the allowable range is 47~63Hz, and the maximum change rate is 20%/s Inverter power 0.2kW~22kW Output frequency 0~599Hz Control mode Spatial Voltage Vector Control Mode (V/F), No PG Vector Control Mode (SVC) Motor type Asynchronous motor, permanent magnet synchronous motor Speed ratio Asynchronous 1:100 (SVC), Synchronous 1:50 (SVC) Speed control accuracy ±0.2%(SVC) Speed

Input Voltage (V): AC 3PH 380~480V Rated voltage: 380V Voltage transient fluctuations are allowed: -15%~+10% Input Current (A): Refer to the GD270 Rated Parameter Table Input Frequency (Hz): 50Hz or 60Hz, allowable range 47~63Hz Output Voltage (V): 0~input voltage Output Current (A): Refer to the GD270 Rated Parameter Table Output Power (kW): Refer to the GD270 Rated Parameter Table Output Frequency (Hz): 0~400Hz Control mode: Spatial voltage vector control mode, no PG vector

Manufacturer: INVT Series: GD20-EU Model: GD20-2R2G-S2-EU Application: general purpose Capacity, kW: 2.2 Current, А: 10 Main power supply, V: 200-240 Phase: 1 Output frequency, Hz: 0-400 Enclosure: IP20 Overload capacity, % per 1 min.: 150 Acceleration time, sec: 0-3600 Deceleration time, sec: 0-3600 EMC filter: optional Analog input: 1+1 Digital input: 4+1 Analog output: 1 Digital output: 1 Relay output: 1 RS485 (Modbus RTU): RS485 (Modbus RTU) Starting torque: 0.5 Hz / 150%

Manufacturer Series Model Input Voltage Input Phases Output Voltage Max Applicable Motor Power (HD, kW) Max Applicable Motor Power (ND, kW) Rated Output Current (HD, A) Rated Output Current (ND, A) Overload (HD) Overload (ND) Control Method V/f IP Rating Standards Yaskawa V1000 CIMR-VA2A0001FAA 200V 3-Phase 0-200V 0.1 0.2 1.2 1.8 150% 60s 120% 60s Open Loop Vector V/f IP20 CE, cUL, UL, RoHS Yaskawa V1000 CIMR-VA2A0002FAA 200V 3-Phase 0-200V 0.2 0.4 1.8 2.7 150% 60s 120% 60s

Input voltage AC 1PH 220V ~ 240V AC 3PH 220V ~ 240V AC 3PH 380V ~ 480V Input frequency 50Hz or 60Hz, the allowable range is 47~63Hz, and the maximum change rate is 20%/s Inverter power 0.2kW~22kW Output frequency 0~599Hz Control mode Spatial Voltage Vector Control Mode (V/F), No PG Vector Control Mode (SVC) Motor type Asynchronous motor, permanent magnet synchronous motor Speed ratio Asynchronous 1:100 (SVC), Synchronous 1:50 (SVC) Speed control accuracy ±0.2%(SVC) Speed

Voltage class (V) Three-phase AC 380 V to 480 V Power (kW) 37 Input current (A) 90 Output current (A) 75 Dimensions (mm) 100 (W) x 400 (H) x 305 (D) Two/Four-quadrant AC drive Two-quadrant Speed stability accuracy V/f: ±1.0% SVC: ±0.5% FVC: ±0.02% Torque control accuracy SVC: ±5%(over 10 Hz ) FVC: ±3% Startup torque SVC: 0.25 Hz/150% FVC: 0 Hz/180% Overload capacity 1 hour at 115% of the rated load; 1 minute at 150% of the rated load; 2 seconds at 178% of the rated load

Open loop V/f & sensorless vector control Closed loop FVC control Starting torque 150% at 0.25 Hz for SVC 180% at 0 Hz for FVC Automatic torque boost Slip compensation Communications options: Modbus-RTU PROFIBUS-DP PROFINET CANopen CANlink Simplified parameters for easy start-up 4-independent S-ramps Flexible programmable I/O connection User programmable function Variable DC injection braking Comprehensive trip diagnostics Output frequency 500 Hz Built-in dynamic braking unit

1.Product Overview INVT GD290-030G/037P-4 is an Inverter Powergood 290 series high-performance vector frequency converter. The G type is 30kW (constant torque) / the P type is 37kW (variable torque), three-phase 380–480V, book-shaped, high power density. It focuses on heavy-duty reliability + precise speed control + energy saving. 2. Product Advantages a. Strong torque: High torque at low speed, excellent for heavy-load startup / stable speed at low speed. b. High reliability